Well Flow Diagnostics

 

Production Logging Tools
During production or injection profiling, a wide range of production logging tools are used for all type of downhole environments in  vertical, deviated, and horizontal wells. Standard Production Logging tools are completely modular and combinable with Array Production Logging sensors to provide accurate measurements of flow velocity, gas hold up, fluid velocity and other auxiliary measurements. These tools are conveyance independent and can be run in real time with E-line or in Memory Production Logging (MPL) mode with similar data quality

Flow Velocity Measurements 
Continuous flow meters, basket flow meters, full-bore flow meters and Inline Flow meters

Fluid Identification / Flow Composition Measurements
Gas holdup, capacitance water holdup, radioactive fluid density, differential pressure density, capacitance array

Flow Condition / Well Diagnostic Tools
Pressure, temperature, X-Y caliper, inclinometer correlation tools – gamma ray, casing collar locator

FracInsight® Analysis
The Halliburton FracInsight® Analysis is an unbiased repeatablesoftware tool used to select perforation clusters and frac stagelocations, based on the best available data along a horizontal well.
TMD3D™ (Thermal Multigate Decay - 3 Detector) Logging Tool
Thermal Multigate Decay-Lithology provides valuable information about formations, reservoirs, tool operation, and recovery techniques.
Reservoir Monitor Tool 3-Detector (RMT-3D™) Tool
Find, analyze, and monitor to increase production. Our 2⅛-in. Reservoir Monitoring Tool 3-Detector (RMT-3D™) pulsed-neutron service solves for water, oil, and gas saturations in reservoirs using three independent measurements of sigma, carbon-oxygen, and saturation gate (SATG). We can uniquely solve your reservoir’s most complex saturation profiles and fluid types—all while eliminating phase-saturation interdependency.
Memory Production Logging (MPL℠ ) Service
Memory Production Logging Service employs downhole memory to record accurate flow profiles and diagnostics, then plays back its captured data when tools are retrieved.

Filter By  
Количество записей на странице Show     results per page
  TitleНазвание  DateДата
Summary Summary Caged Fullbore Flowmeter (3 arm CFBM)
Halliburton’s Caged Fullbore Flowmeter (3 arm CFBM) accurately measures downhole flow rates with coverage over a large cross section of the casing
Summary Summary In-line Spinner Flowmeter (ILS)
Halliburton’s In-line Spinner Flowmeter (ILS) is a compact flowmeter that can be run in combination with other production logging tools.
Summary Summary Diverter Basket Flowmeter (DBT)
Halliburton’s Diverter Basket Flowmeter (DBT) is an ideal way to determine fluid velocity for vertical or deviated wells.
Summary Summary Caged Fullbore Flowmeter (6 arm CFBM)
Halliburton’s Caged Fullbore Flowmeter (6 arm CFBM) is a larger variation of the 3 arm CFBM. Like its smaller counterpart, the 6 arm CFBM accurately measures downhole flow rates with coverage over a large cross section of the casing.
Summary Summary Capacitance Array Tool (CAT)
Halliburton’s Capacitance Array Tool (CAT) helps identify fluid phases in high deviation and horizontal wells.
Summary Summary Spinner Array Tool (SAT)
Halliburton’s Spinner Array Tool (SAT) provides vital information by measuring discreet local fluid velocities around the wellbore.
Summary Summary Resistance Array Tool (RAT)
Halliburton’s Resistance Array Tool (RAT) enables an operator to determine the water hold-up profile across an entire wellbore.
Summary Summary Well Integrity Management
Maintaining production while mitigating risk
Summary Summary Halliburton helped company optimize production with horizontal logging technology
Halliburton provided accurate, real-time production logging service for horizontal wells
Summary Summary ACX™ tool identifies low-rate gas leak in production casing, saving Caelus Energy Alaska USD 3 million
Operator avoids costly workover operation by using the ACX™ service
Summary Summary Offshore Egypt Rigless Wireline Intervention Solution Adds 4,000 BOPD with Zero Water Production
Complex Wireline Job Executed Safely and Efficiently
Summary Summary Successful Collaboration Between Halliburton and WEPCO Added 150% in Oil Daily Production Rate
Rigless Pulsed-Neutron and Production Logging Operation Used To Identify Bypassed Oil Zones And Water Shutoff Reservoirs
Summary Summary Halliburton Wireline and Perforating Capabilities
Halliburton Wireline and Perforating Services has industry-leading technology. But in this market, technology is just the price of entry. A wide range of integrated services sets us apart from most of our competitors. Our accessibility, collaborative attitude, reliability and responsiveness set us apart from the rest.
Summary Summary Continuous Flowmeter Spinner (CFS)
Halliburton’s Continuous Flowmeter Spinner (CFS) is ideal for measuring fluid velocity in difficult wellbore conditions.
Summary Summary Spectral Density Log (SDL™) Tool
The Halliburton LOGIQ® Spectral Density Log (SDL™) tool provides superior measurements of the bulk density (ρb) and borehole-compensated photoelectric factor (Pe) that are critical to accurate determination of formation porosity and lithology.
Summary Summary Down-View Camera
Unique to this camera is the ability to buffer up to 30 seconds of full-frame rate (30 fps) video in the tool.
Summary Summary Down-View and Side-View Camera
Imagery and telemetry data from the tool are transmitted to the top-side receiver in real time. A viewer allows the opportunity to easily browse and interpret well imagery.
Summary Summary Wireline and Perforating Catalog
Summary Summary FracInsight® Analysis
The Halliburton FracInsight® Analysis is an unbiased repeatablesoftware tool used to select perforation clusters and frac stagelocations, based on the best available data along a horizontal well.
Summary Summary TMD3D™ (Thermal Multigate Decay - 3 Detector) Logging Tool
Thermal Multigate Decay-Lithology provides valuable information about formations, reservoirs, tool operation, and recovery techniques.
Summary Summary Reservoir Monitor Tool 3-Detector (RMT-3D™) Tool
Find, analyze, and monitor to increase production. Our 2⅛-in. Reservoir Monitoring Tool 3-Detector (RMT-3D™) pulsed-neutron service solves for water, oil, and gas saturations in reservoirs using three independent measurements of sigma, carbon-oxygen, and saturation gate (SATG). We can uniquely solve your reservoir’s most complex saturation profiles and fluid types—all while eliminating phase-saturation interdependency.
Summary Summary Production Logging
Halliburton production logging offers a wide range of solutions for all types of downhole environments.
Summary Summary Memory Production Logging (MPL℠ ) Service
Memory Production Logging Service employs downhole memory to record accurate flow profiles and diagnostics, then plays back its captured data when tools are retrieved.
Summary Summary Cased-Hole Evaluation
With over 76 years of cased hole logging experience, Halliburton is qualified to solve all your cased-hole challenges. We offer cement evaluation, reservoir monitoring, perforating, pipe recovery, casing evaluation and mechanical needs products and services.
Related Information

Related Information Дополнительная информация