Latexes
Gas migration can be controlled with a cement system that includes latex, stabilizers and dispersants. These latex systems can reduce fluid loss, increase acid resistance, and improve high-temperature suspension properties. In general, latexes are colloidal in nature, with particles larger than a molecule, but smaller than grains of sand. These particles also have a very large surface area. As a result, the particles coagulate and deliver low permeability for a gas-tight cement sheath. Additionally, latexes enhance tensile and flexural strengths of the cement sheath.
|
Latex 2000™ Cement Additive
Excellent fluid-loss control, high-temperature suspension properties, and acid resistance to cement slurries.
|
|
|
Stabilizer 434B Latex Stabilizer
Liquid material used with Latex 2000 cement to stabilize latex in the cement slurry.
|
|
|
Latex 3000™ Cement Additive
A liquid additive designed to lower equivalent circulating density (ECD) and to impart excellent fluid-loss control, high-temperature suspension properties, and acid resistance to cement slurries.
|
Latexes
| Filter By |
|
Количество записей на странице
Show
results per page
|
| TitleНазвание | DateДата | |
|
Stabilizer 434C Latex Stabilizer
Stabilizer 434C latex stabilizer is a liquid material used with Latex 2000 cement to stabilize the latex in the cement
slurry. The Latex 2000 system is a polymer emulsion and in the presence of salts, particularly divalent ions such as
calcium, the latex tends to come out of emulsion, losing its effectiveness against gas migration in cement slurries. Stabilizer 434C latex stabilizer helps prevent the de-emulsification of Latex 2000 additive in cement slurries.
|
|
|
|
Stabilizer 434B Latex Stabilizer
Stabilizer 434B latex stabilizer helps prevent gas migration in Latex 2000 cement, a low fluid-loss cementing system. Latex 2000 cement is a water-internal, oil-external emulsion; in the presence of water, the system tends to come out of emulsion, losing its effectiveness against gas migration. Stabilizer 434B latex stabilizer helps prevent the de-emulsification of Latex 2000 cement.
|
|
|
|
Halad®-447 Additive
Halad®-447 is a fluid-loss additive containing polyvinyl alcohol. This additive helps prevent fluid loss and gas migration in most API and lightweight commercial cements.
|
|
|
|
Stabilizer 434B Latex Stabilizer A-4
Stabilizer 434B latex stabilizer helps prevent gas migration in Latex 2000 cement, a low fluid-loss cementing system. Latex 2000 cement is a water-internal, oil-external emulsion; in the presence of water, the system tends to come out of emulsion, losing its effectiveness against gas migration. Stabilizer 434B latex stabilizer helps prevent the de-emulsification of Latex 2000 cement.
|
|
|
|
Halad®-447 Additive (Russian)
Halad-447 Data sheet in Russian
|
|
|
|
Halad®-447 Additive A-4
Halad®-447 is a fluid-loss additive containing polyvinyl alcohol. This additive helps prevent fluid loss and gas migration in most API and lightweight commercial cements.
|
|
|
|
Halad-400L Fluid Loss Additive
Halliburton’s Halad®-400L fluid loss additive is a synthetic additive
developed for temperatures from below 80°-400°F (27°-204°C) and for salt concentrations from zero percent to saturated salt concentrations. Halad-400L has been environmentally approved
for use in the North Sea (exhibits biodegradability, low toxicity,
and low bioaccumulation potential). This additive works without building viscosity and has a slightly dispersive character, thus the cement slurry remains thin. This additive is available as an aqueous liquid with a 22% activity.
|
|
|
|
Halad-400L Fluid Loss Additive
Halliburton’s Halad®-400L fluid loss additive is a synthetic additive
developed for temperatures from below 80°-400°F (27°-204°C) and for salt concentrations from zero percent to saturated salt concentrations. Halad-400L has been environmentally approved
for use in the North Sea (exhibits biodegradability, low toxicity,
and low bioaccumulation potential). This additive works without building viscosity and has a slightly dispersive character, thus the cement slurry remains thin. This additive is available as an aqueous liquid with a 22% activity.
|
|
|
|
Latex 2000 A-4
Latex 2000 liquid additive is designed to impart excellent fluid-loss control, high-temperature suspension properties,
and acid resistance to cement slurries. Latex 2000 additive is successful across a wide range of well conditions (Ambient to 380°F circulating temperature) and is used in both primary casing cementing operations and remedial squeeze work.
|
|
|
|
Latex 2000
Latex 2000 liquid additive is designed to impart excellent fluid-loss control, high-temperature suspension properties,
and acid resistance to cement slurries. Latex 2000 additive is successful across a wide range of well conditions (Ambient to 380°F circulating temperature) and is used in both primary casing cementing operations and remedial squeeze work.
|
|
|
|
Latex 2000 (Russian)
Latex 2000 liquid additive is designed to impart excellent fluid-loss control, high-temperature suspension properties,
and acid resistance to cement slurries. Latex 2000 additive is successful across a wide range of well conditions (Ambient to 380°F circulating temperature) and is used in both primary casing cementing operations and remedial squeeze work.
|
|
|
|
Latex 2000™ Cement Additive
Excellent fluid-loss control, high-temperature suspension properties, and acid resistance to cement slurries.
|
|
|
|
Stabilizer 434B Latex Stabilizer
Liquid material used with Latex 2000 cement to stabilize latex in the cement slurry.
|
|
|
|
Latexes
Halliburton's latex cement systems control gas-migration by reducing fluid loss. Latex can also provides acid resistance properties to cement slurry system. Latex can aid suspension in slurry without greatly increasing viscoity.
|
|
|
|
Latex 3000™ Cement Additive
A liquid additive designed to lower equivalent circulating density (ECD) and to impart excellent fluid-loss control, high-temperature suspension properties, and acid resistance to cement slurries.
|
