Halad®-600 LE+ Fluid Loss Additive

Helps control fluid loss in environmentally sensitive areas.

Halad-600 E+ additive provides the same fluid-loss control and rheology properties as Halad®-361A additive.Halad-600 E+ additive can be used at bottomhole temperatures (BHTs) between 125° and 300°F (50° to 150°C).Typical additive concentrations are 0.5 to 1 gal/sk(4 to 10 L/kg).

Halad-600 E+ additive acts as a mild retarder and dispersant. At increased temperatures, larger amounts of this additive will be required for adequate fluid-loss control. In most cases, an extender should be used to stabilize the slurry and minimize free water.

Halad-600 E+ additive can provide the following benefits: It is compatible with seawater and saturated salt water.It will not degrade when contacted by air.The Environmental Protection Agency (EPA) does not list Halad-600 E+ additive as a hazardous waste.

Dual Spacer System - Product Specifications
Part No. 516.01027 Bulk Density 8.75 lb/gal
Form Brown liquid Packaging 55-gal drum
Specific Gravity 1.050 pH  7 to 8

 

Comments? Questions? Need More Information?

Halad®-600 LE+ Fluid Loss Additive

Filter By  
Количество записей на странице Show     results per page
  TitleНазвание  DateДата
Summary Summary Halad®-600 E+ Additive -A4
Halad®-600 E+ additive helps control fluid loss in environmentally sensitive areas.
Summary Summary Halad®-600 E+ Additive
Halad®-600 E+ additive helps control fluid loss in environmentally sensitive areas.
Summary Summary Halad®-600 E+ Additive (Russian)
Halad®-600 E+ -- Russian
Summary Summary Halad®-600 LE+ Fluid Loss Additive
Helps control fluid loss in environmentally sensitive areas between 125°F (51.7°C) and 300°F (148.9°C), acts as a mild retarder, gel breaker, and dispersant.
Related Information

Related Information Дополнительная информация