Thermomechanical Cuttings Cleaner (TCC)

Baroid's Thermomechanical Cuttings Cleaner (TCC) unit is specially designed for the processing of oil contaminated drilling waste such as typical drill cuttings, slop-mud and spent drilling mud. Its mechanical action is applied directly to the drill cuttings via hammers that create friction which causes temperatures to rise above the boiling points of water and oil. Once these temperatures are reached, hydrocarbons are removed from the solids to an acceptable disposal limit (<1% oil on cuttings). The oil and water vapors that remain are then fed through the TCC condensing system and recovered in the form of recovered heavy oil, recovered light oil, and recovered water.

 

With the TCC, operators meet the majority of offshore discharge regulations globally. In fact, the only ones it doesn't meet are countries with zero discharge regulations. The low oil on cuttings ratio of <1% also ensures compliance to any onshore disposal methods.

Save costs. Save space. Save oil. Save time

Halliburton Baroid's TCC unit, used at the source of the drilling waste, can eliminate transportation costs, minimizes crane lifts associated with Skip and Ship operations, and reduces excessive manual handling improving HSE benefits over other thermal options. The TCC unit can be fueled by the recovered base oil and the recovered oil not used as fuel can be added back to the drilling mud for reuse. It has the smallest footprint for throughput (6MT/HR) in the market.

Thermomechanical Cuttings Cleaner (TCC)

Filter By  
Количество записей на странице Show     results per page
  TitleНазвание  DateДата
Summary Summary BaraPhase™ Thermomechanical Cuttings Cleaner (TCC) - Sales Data Sheet
Halliburton Baroid’s BaraPhase™ thermomechanical Cuttings Cleaner (TCC) unit is specially designed for the processing of oil contaminated drilling waste such as typical drill cuttings, slop-mud and spent drilling mud.
Summary Summary BaraPhase™ TCC Proves Key for Zero-Discharge Waste Management
Baroid Solution efficiently transfers, processes, and stores drilling waste for offshore operations
Summary Summary BaraPhase™ Thermomechanical Cuttings Cleaner Recovers Significant Base Oil for Reuse
The operator needed to meet three objectives while drilling with NAF: » Prevent contamination » Recover base oil for reuse » Reduce OOC to less than 1 percent
Summary Summary Kazakhstan: Innovative Waste Management System from Baroid Surface Solutions Helps Assure Environmental Compliance and Saves Millions
For more than four years the TCC system has operated successfully for this operator, handling up to three drilling rig operations, and treating more than 36,000m³ of oil based drill cuttings.
Summary Summary Kazakhstan: Baroid Drilling Waste Management Service Helped Operator Net $1.39M in Base Oil Reuse Savings and Ensure Environmental Compliance in Remote Land Operation
An operator’s waste managementstrategy needed revision to help ensure operations continued in a safe and environmentally acceptable manner.
Summary Summary BaraPhase™ TCC and BaraStream™ HCB™ Tanks Eliminate Skip-and-Ship Issues
Baroid Solutions enable operator to finish project six months ahead of schedule
Summary Summary Thermomechanical Cuttings Cleaner (TCC)
Baroid’s Thermomechanical Cuttings Cleaner (TCC) process unit is specially designed for the processing of oil contaminated drilling waste such as typical drill cuttings, slop-mud and spent drilling mud.
Related Information

Related Information Дополнительная информация