Halad®-688 and Halad®-688 EXP additives

Fluid-loss additives with strong dispersive properties. The material may be slightly retarding to neutral, depending on thecomposition of the cement blend concerned.

Halad-688 additives work well with heavier (higher density) slurries. The additive is especially useful for cements blends that tend to mix “thick” or at a high viscosity. However,the strong dispersive properties of the Halad-688 additive may cause low viscosity slurries to develop settling problems. Halad-688 additives are generally recommended for use at temperatures lower than 300°F because it shows some loss of efficiency above 300°F. Using Halad-413 additive along with Halad-688 additive at higher temperatures may improve its effectiveness.The versatility of the Halad-688 and Halad-688 EXP additives allows them to be used with most API and non-API classes, including construction-type cements.This new class of additives can help lower slurry costs by several methods:

  • Enable use of low-cost cements.
  • Reduce need for other additives such as retarders.
  • Cover a wide range of temperatures up to 400°F.
  • Enhance cement compressive strength.
  • Enhance cement-bonding properties.

Halad-688 EXP additive in liquid form (40% active) isreadily available for use offshore and in land-basedapplications where liquid additives are required.

Halad-688 and Halad-688 EXP additives are cost-effective fluid loss additives with strong dispersive properties.Halad-688 additive is especially useful for cements and blends that tend to mix “thick” or with high viscosity.Halad-688 additive functions in the temperature range of 80° to 300°F. It causes moderate retardation below 150°F and has no effect on retardation above 200°F. The recommended concentration range is 0.1 to 1.5% bwoc.

Halad-688 additive may aid with the mixability of construction type (i.e., Type I) cements.Halad-688 and Halad-688 EXP additives generally work very well with heavier (higher-density) slurries. Low-viscosity slurries may develop settling problems caused by the strong dispersive properties of the Halad-688 additive.

Halad®-688 Fluid Loss Additive Product Specifications

SAP No. 101348755 (50-lb bag) Bulk Density 24 lb/ft3
Form Solid Color Brown
Specific Gravity 1.36 Description Powder

 

Halad®-688 EXP Fluid Loss Additive Product Specifications

SAP No. 101360721 (55-gal drum)
101360720 (5-gal pail)
Percent Activity 40%
Form Liquid Description Liquid
Specific Gravity 1.038 Color Reddish Brn

 

Comments? Questions? Need More Information?

Filter By  
Количество записей на странице Show     results per page
  TitleНазвание  DateДата
Related Information

Related InformationДополнительная информация