[{"contenttype":"centerColList","datasource":[{"title":"Dustin Young, global technical advisor Unconventionals, was featured in Upstream Technology Magazine","description":"Dustin Young discusses the future for international shale gas developments. ","path":"/content/dam/ps/public/common/Papers_and_Articles/web/upstream-technology-dustin-young.pdf","docCreatedDate":"2017-01-01T22:30:00.000-06:00","modifiedDate":"2017-04-07T23:30:00.000-05:00","publishDate":"2018-10-02T11:01:47.225-05:00","docdate":"2017-01-01T22:30:00.000-06:00","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Production_Challenges:Unconventional_Resources,|locations:Global,|prodgroups:Completion_Equipment_and_Services,"},{"title":"Ahmed Kenawi, senior vice president Middle East & North Africa Region, was the featured cover story in Oil & Gas Middle East Magazine","description":"Ahmed Kenawi discusses how Halliburton is banking on its core strengths and R&D-fueled offerings to stay competitive and consolidate its position.\n\n","path":"/content/dam/ps/public/common/Papers_and_Articles/web/ahmed-kenawi-ogme-cover-story.pdf","docCreatedDate":"2017-02-01T22:30:00.000-06:00","modifiedDate":"2017-02-16T22:30:00.000-06:00","publishDate":"2018-10-02T11:01:45.598-05:00","docdate":"2017-02-01T22:30:00.000-06:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,"},{"title":"HCS AdvantageOne™ offshore cementing system was featured in Upstream Technology Magazine","description":"The HCS AdvantageOne™ offshore cementing system is the next generation of cementing and well-control pump performance for ultra-deep water. ","path":"/content/dam/ps/public/common/Papers_and_Articles/web/upstream-technology-advantageone.pdf","docCreatedDate":"2017-05-08T23:30:00.000-05:00","modifiedDate":"2017-05-08T23:30:00.000-05:00","publishDate":"2018-10-02T11:01:48.490-05:00","docdate":"2017-05-08T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Deepwater:Increase_Reliability,Deepwater,|locations:Global,|prodgroups:Cementing:Deep_Water_Cementing:Reliability-Well_Integrity:Surface_Reliability,Cementing:Offshore_Cementing_Units:Pumping_Equipment_Offshore,"},{"title":"World Oil: 21st century commercialization: Where are we now?","description":"Rob Hull, Senior Regional Manager - Project Management EESSA, discusses his view of the commercialization process and provides a few ideas on how we can improve it.","path":"/content/dam/ps/public/common/Papers_and_Articles/web/world-oil-executive-viewpoint-commercialization.pdf","docCreatedDate":"2018-10-01T12:51:00.000-05:00","modifiedDate":"2018-10-18T12:55:39.930-05:00","docdate":"2018-10-01T12:51:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,"},{"title":"Why Can\u2019t We Apply Advanced Technologies More Often to Vertical Wells in Mature Fields?","description":"So, can we not apply advanced technologies\nmore often to mature vertical\nwells? We can, but two factors need to be\nconsidered when doing so\u2014technology\nand cost.","path":"/content/dam/ps/public/common/Papers_and_Articles/web/advanced-technologies-to-vertical-wells-in-mature-fields.pdf","docCreatedDate":"2017-06-14T23:30:00.000-05:00","modifiedDate":"2017-06-14T23:30:00.000-05:00","publishDate":"2018-10-02T11:01:49.863-05:00","docdate":"2017-06-14T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Reservoir_Challenges:Mature_Fields,|locations:Global,"},{"title":"JPT: An Interview With Halliburton CEO Jeff Miller","description":"Jeff Miller is president and\nchief executive officer (CEO)\nof Halliburton, a position he\nassumed in June 2017.","path":"/content/dam/ps/public/common/Papers_and_Articles/web/jpt-jeffmiller-interview.pdf","docCreatedDate":"2018-02-01T22:30:00.000-06:00","modifiedDate":"2018-02-01T22:30:00.000-06:00","docdate":"2018-02-01T22:30:00.000-06:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,"},{"title":"Evaluation of Reactive Clay in Indian Shale","description":"Shale formations are composed of clays, feldspars, carbonates, and quartz as major ingredients. Among all the constituents,\nclays are the most important parameter from an application point of view because of their possibly sensitive nature...","path":"/content/dam/ps/public/common/Papers_and_Articles/web/Evaluation-Reactive-Clay-Indian-Shale.pdf","docCreatedDate":"2014-07-01T23:30:00.000-05:00","modifiedDate":"2014-08-14T23:30:00.000-05:00","publishDate":"2018-10-02T11:01:45.598-05:00","docdate":"2014-07-01T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Production_Challenges:Natural_Gas,Production_Challenges:Unconventional_Resources,|locations:Global,"},{"title":"World Oil: Jeff Miller shares his vision for Halliburton's future","description":"In an exclusive interview at the company's headquarters in north Houston, Halliburton President Jeff Miller, newly named as CEO, visited with Gulf Publishing Vice President Ron Higgins and Editor-in-Chief Kurt Abraham, to outline his thoughts and priorities for the firm's next few years.","path":"/content/dam/ps/public/common/Papers_and_Articles/web/jeff-miller-shares-his-vision-for-halliburtons-future.pdf","docCreatedDate":"2017-07-20T23:30:00.000-05:00","modifiedDate":"2017-07-19T23:30:00.000-05:00","docdate":"2017-07-20T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Deepwater,Production_Challenges:Unconventional_Resources,Reservoir_Challenges:Mature_Fields,|locations:Global,"},{"title":"NeoCem™ Cement was featured in Upstream Technology Magazine","description":"NeoCem™ cement is a low-Portland cement system that delivers high-performance compressive strength, elasticity, and shear bond at a lower density than conventional cement systems. ","path":"/content/dam/ps/public/common/Papers_and_Articles/web/upstream-technology-neocem.pdf","docCreatedDate":"2017-05-11T23:30:00.000-05:00","modifiedDate":"2017-05-11T23:30:00.000-05:00","publishDate":"2018-10-02T11:01:48.490-05:00","docdate":"2017-05-11T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,"},{"title":"Oil & Gas Journal: Halliburton Celebrates 100 Years","description":"Halliburton will celebrate its 100-year anniversary throughout 2019 with employee, customer and community events.","path":"/content/dam/ps/public/common/Papers_and_Articles/web/halliburton-100-years-oil-and-gas-journal.pdf","docCreatedDate":"2019-04-24T10:39:00.000-05:00","modifiedDate":"2019-04-24T11:39:49.050-04:00","docdate":"2019-04-24T10:39:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,"},{"title":"GeoDrilling International: Solutions for geothermal well drilling problems","description":"While the technology for drilling geothermal wells can be easily adapted from other industries the lining of them creates special demands, demands which Halliburton is able to meet.","path":"/content/dam/ps/public/common/Papers_and_Articles/web/geodrilling-international-geothermal-drilling.pdf","docCreatedDate":"2019-05-01T14:44:00.000-05:00","modifiedDate":"2019-05-20T15:45:18.370-04:00","docdate":"2019-05-01T14:44:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Environmental_Challenges:Geothermal,|locations:Global,"},{"title":"Spacer Tech","description":"The variable-viscosity, optimized-rheology spacer lowers drilling costs through shorter rig time and recovery of drilling fluids. In one notable application, the use of a variable-viscosity,\noptimized-rheology (VVOR) spacer enabled an operator to save $150,000 on rig time and recover usable drilling fluid. Avoidance of remedial cementing saved from $15,000 to $100,000.\nA successful well completion demands the satisfaction of a number of criteria, one of which is the effective placement of cement. The main purposes of primary cementing are to create a secure bond with the pipestring and formation in order to strengthen both, supply zonal isolation from formation fluids by sealing the annulus, and protect the casing from corrosion.","path":"/content/dam/ps/premium/cem/contents/Papers_and_Articles/web/H/H05188_WP.pdf","docCreatedDate":"2006-11-01T22:30:00.000-06:00","modifiedDate":"2006-11-01T22:30:00.000-06:00","publishDate":"2018-10-02T02:33:23.377-05:00","docdate":"2006-11-01T22:30:00.000-06:00","docrefNum":"","languageSet":["English"],"accessType":"R","dataSearch":"custchallenges:Reducing_Costs,|locations:Global,|prodgroups:Cementing:Cementing_Chemistry:Spacers_and_Flushes,"},{"title":"Repairing Casing and Collar Leaks with Micro Matrix Cement","description":"Casing and collar leaks are a common problem for injection operations in many wells. These leaks can be caused by corrosion, casing damage resulting from tool wear, or failure of the threads to provide an adequate seal. Squeezing the leaks with low-fluid-loss cement slurries can repair the leaks. However, if the casing collar leak is narrow or tight, standard API cements will not penetrate enough to provide a complete seal without requiring perforation. Tight leaks can restrict the entry of standard cement slurries as much as 500 psi in 10 to 20 minutes.\n\n","path":"/content/dam/ps/premium/cem/contents/Papers_and_Articles/web/I_through_O/micromatrix.pdf","docCreatedDate":"2000-12-01T08:00:00.000Z","modifiedDate":"2008-12-30T22:30:00.000-06:00","publishDate":"2018-10-02T02:33:35.633-05:00","docdate":"2000-12-01T08:00:00.000Z","docrefNum":"","languageSet":["English"],"accessType":"R","dataSearch":"custchallenges:Maintenance_Challenges,|locations:Global,|prodgroups:Cementing:Specialty_Products,"},{"title":"Wettability Evaluation Boosts Efficiency, Economy of Cement Operations","description":"This paper offers an introductory overview of apparent wettability evaluation. A new technique for evaluating the apparent wettability of spacer fluids and preflushes is helping operators significantly reduce surfactant requirements and minimize the potential for costly zonal isolation problems. In an early application, the technique allowed laboratory personnel to custom-design a surfactant package for a major operator that reduced surfactant costs by as much as 50%.","path":"/content/dam/ps/premium/cem/contents/Papers_and_Articles/web/P_through_Z/WET_EVAL.pdf","docCreatedDate":"2006-06-13T08:00:00.000Z","modifiedDate":"2009-01-29T22:30:00.000-06:00","docdate":"2006-06-13T08:00:00.000Z","docrefNum":"","languageSet":["English"],"accessType":"R","dataSearch":"locations:Global,|prodgroups:Cementing:Cementing_Products_and_Processes,"},{"title":"PermSeal Solution Stops Artesian Water, Geopressured Sand Flows","description":"Operators drilling in deepwater off the continental shelf can use PermSeal, an acrylate monomer solution (AMS), to prevent artesian water flows and geopressured sand flows from entering the wellbore. Unchecked water flows can wash cement away from casing, making cementation of conductor pipe expensive and sometimes impossible.","path":"/content/dam/ps/premium/cem/contents/Papers_and_Articles/web/P_through_Z/permseal.pdf","docCreatedDate":"2008-12-30T22:30:00.000-06:00","modifiedDate":"2008-12-30T22:30:00.000-06:00","publishDate":"2018-10-02T02:33:26.469-05:00","docdate":"2008-12-30T22:30:00.000-06:00","docrefNum":"","languageSet":["English"],"accessType":"R","dataSearch":"custchallenges:Deepwater,|locations:Global,Oceans_Gulfs_International_Waters:Gulf_of_Mexico,|prodgroups:Cementing:Cementing_Products_and_Processes,"},{"title":"Spacer Tech Saves","description":"In one notable application, the use of a variable-viscosity, optimized-rheology (VVOR) spacer enabled an operator to save $150,000 on rig time and recover usable drilling fluid. Avoidance of remedial cementing saved from $15,000 to $100,000.","path":"/content/dam/ps/premium/cem/contents/Papers_and_Articles/web/P_through_Z/SpacerTechSaves.pdf","docCreatedDate":"2008-12-29T22:30:00.000-06:00","modifiedDate":"2008-12-29T22:30:00.000-06:00","publishDate":"2018-10-02T02:33:29.834-05:00","docdate":"2008-12-29T22:30:00.000-06:00","docrefNum":"","languageSet":["English"],"accessType":"R","dataSearch":"custchallenges:Reducing_Costs,Production_Challenges:Long_Term_Zonal_Isolation,|locations:Global,|prodgroups:Cementing:Cementing_Equipment:Mixing_and_Control_Equipment,Cementing:Cementing_Chemistry:Spacers_and_Flushes,"},{"title":"Squeeze Cementing Using Micro Matrix Ultrafine Cement","description":"Defined by Shryock and Slagle as \"the process of forcing a cement slurry into holes in the casing and cavities behind the casing,\" squeeze cementing has often been viewed as an art rather than a science. Because of this, Micro Matrix® ultrafine cement has been developed to help increase operators' success in squeeze-cementing operations.","path":"/content/dam/ps/premium/cem/contents/Papers_and_Articles/web/P_through_Z/squeezecemmm.pdf","docCreatedDate":"2008-11-25T22:30:00.000-06:00","modifiedDate":"2008-11-25T22:30:00.000-06:00","publishDate":"2018-10-02T02:33:30.585-05:00","docdate":"2008-11-25T22:30:00.000-06:00","docrefNum":"","languageSet":["English"],"accessType":"R","dataSearch":"custchallenges:Extending_Economic_Life,Production_Challenges:Long_Term_Zonal_Isolation,Reducing_Costs,Maintenance_Challenges,|locations:Global,|prodgroups:Cementing,"},{"title":"StrataLock™ Wellbore/Formation Stabilization System Consolidates Wellbores (Paper / Article)","description":"StrataLock™ Wellbore/Formation Stabilization System Consolidates Wellbores (Paper / Article)","path":"/content/dam/ps/premium/cem/contents/Papers_and_Articles/web/P_through_Z/Strlk.pdf","docCreatedDate":"2008-11-25T22:30:00.000-06:00","modifiedDate":"2008-11-25T22:30:00.000-06:00","publishDate":"2018-10-02T02:33:31.353-05:00","docdate":"2008-11-25T22:30:00.000-06:00","docrefNum":"","languageSet":["English"],"accessType":"R","dataSearch":"locations:Global,|prodgroups:Cementing:Cementing_Products_and_Processes,"},{"title":"Integrated Controls for Precision Cementing","description":"Over the years, cementing equipment has been refined to maximize the performance of new materials and processes and to accommodate the requirements of increasingly complex cementing jobs. Now, technology is taking cement quality control to an even higher level with a new integrated control system.","path":"/content/dam/ps/premium/cem/contents/Papers_and_Articles/web/P_through_Z/PRECISIONCEM.pdf","docCreatedDate":"2006-06-13T08:00:00.000Z","modifiedDate":"2009-01-29T22:30:00.000-06:00","publishDate":"2018-10-02T02:33:33.816-05:00","docdate":"2006-06-13T08:00:00.000Z","docrefNum":"","languageSet":["English"],"accessType":"R","dataSearch":"locations:North_America:Canada,Global,|prodgroups:Cementing:Deep_Water_Cementing:Reliability-Well_Integrity:Surface_Reliability,Cementing:Deep_Water_Cementing:Reliability-Well_Integrity,Cementing:Deep_Water_Cementing,Cementing:Cementing_Equipment,Cementing:Cementing_Products_and_Processes,"},{"title":"Tailor Lightweight Slurry Designs to Well Conditions and Production Plans","description":"White Paper by Crook, Kulakofsky, and Griffith. More than ever before, operators and service companies planning lightweight oil- and gas-well cement jobs are giving attention to casing/cement sheath integrity for the entire life of oil, gas, geothermal, and gas-storage wells. ","path":"/content/dam/ps/premium/cem/contents/Papers_and_Articles/web/P_through_Z/Tailor_Lightweight_Slurry.pdf","docCreatedDate":"2006-11-08T22:30:00.000-06:00","modifiedDate":"2006-11-08T22:30:00.000-06:00","docdate":"2006-11-08T22:30:00.000-06:00","docrefNum":"","languageSet":["English"],"accessType":"R","dataSearch":"locations:Global,|prodgroups:Cementing:Cementing_Products_and_Processes,"},{"title":"Central Graben Extreme Offshore High-Pressure/High-Temperature Cementing Case Study","description":"This paper presents six cementing case histories from offshore wells in the Central Graben area of the North Sea. These wells were chosen because they provide valuable information regarding the problems encountered in cementing extreme offshore, high-pressure/high-temperature (HPHT) wells. The Central Graben wells had an average depth of 6000 m true vertical depth (TVD), temperatures greater than 200°C, small fracture/pore-pressure margins, and bottomhole pressures exceeding 1,100 bar. The well deviation varied from near vertical to a maximum of 35°. These downhole conditions are the most extreme yet experienced in a field development in the North Sea.","path":"/content/dam/ps/premium/cem/contents/Papers_and_Articles/web/P_through_Z/WP6266.pdf","docCreatedDate":"2008-11-25T22:30:00.000-06:00","modifiedDate":"2008-11-25T22:30:00.000-06:00","publishDate":"2018-10-02T02:33:32.144-05:00","docdate":"2008-11-25T22:30:00.000-06:00","docrefNum":"","languageSet":["English"],"accessType":"R","dataSearch":"custchallenges:Environmental_Challenges,Environmental_Challenges:Pressure,Environmental_Challenges:Temperature,|locations:Oceans_Gulfs_International_Waters:North_Sea,Global,|prodgroups:Cementing,"},{"title":"Job Design and Cement System to Contain Steam and Improve Heavy Oil Recovery","description":"Heavy oil is found in different parts of the world and could be an important part of the answer to this demand for energy. However, heavy oil is highly viscous and traditional methods are not sufficient to produce these wells.","path":"/content/dam/ps/premium/cem/contents/Papers_and_Articles/web/P_through_Z/World_Heavy_Oil.pdf","docCreatedDate":"2008-03-19T23:30:00.000-05:00","modifiedDate":"2008-03-19T23:30:00.000-05:00","publishDate":"2018-11-25T01:52:54.401-06:00","docdate":"2008-03-19T23:30:00.000-05:00","languageSet":["English"],"accessType":"R","dataSearch":"locations:Global,|prodgroups:Cementing:Casing_Equipment,Cementing:Cementing_Solutions:Slurries,Cementing:Life_of_the_Well_Cementing,Cementing:Cementing_Solutions:Self-healing_Cement,Cementing:Cementing_Products_and_Processes,"},{"title":"A drilling fluid from Halliburton\u2019s Baroid business combines new emulsion chemistries with polymers to extend the operating environment of a drilling fluid for high-pressure, high-temperature conditions.","description":"Baroid introduced BaraECD in 2012 for use in narrow margin\ndrilling operations in\nthe Gulf of Mexico.","path":"/content/dam/ps/public/bar/contents/Papers_and_Articles/web/baraECD.pdf","docCreatedDate":"2015-01-01T22:30:00.000-06:00","modifiedDate":"2015-02-24T22:30:00.000-06:00","docdate":"2015-01-01T22:30:00.000-06:00","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Drilling_Challenges,|locations:Global,Oceans_Gulfs_International_Waters:Gulf_of_Mexico,|prodgroups:Fluids_Solids_Control:Drilling_Fluids:Non-Aqueous_Drilling_Fluid_Systems,"},{"title":"Solvent Removes Downhole NORM-Contaminated BaS04 Scale","description":"A Research project in Canada demonstrated that a solvent can remove barium sulfate (BaS04) scale contaminated with NORM from wells.","path":"/content/dam/ps/public/pe/contents/Papers_and_Articles/web/Numerical/h00005.pdf","docCreatedDate":"1996-06-27T23:30:00.000-05:00","modifiedDate":"2007-11-14T22:30:00.000-06:00","publishDate":"2018-10-02T11:39:19.262-05:00","docdate":"1996-06-27T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Stimulation:Acidizing,Stimulation:Acidizing:Scale_Control,"},{"title":"Delivering operational, financial benefits to Permian stimulation projects","description":"Integrated bacterial control solutions extend the health of wells","path":"/content/dam/ps/public/pe/contents/Papers_and_Articles/web/A_through_P/bacterial-control-permian-ep-article.pdf","docCreatedDate":"2017-10-23T23:30:00.000-05:00","modifiedDate":"2017-10-23T23:30:00.000-05:00","publishDate":"2018-10-02T11:39:16.378-05:00","docdate":"2017-10-23T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Stimulation:Fracturing:Additives-Fracturing,"},{"title":"Unconventional Wisdom Oilfield Technology March 2013","description":"Oilfield Technology Magazine, March 2013 \nArticle explains how unconventional fracturing can be understood through statistically matching fracture networks to microseismic data","path":"/content/dam/ps/public/pe/contents/Papers_and_Articles/web/A_through_P/H010125-Knoesis-Foray-article-March-2013.pdf","docCreatedDate":"2013-03-01T22:30:00.000-06:00","modifiedDate":"2013-04-09T23:30:00.000-05:00","publishDate":"2018-10-02T11:39:17.353-05:00","docdate":"2013-03-01T22:30:00.000-06:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Reservoir_&_Fracture_Monitoring:Microseismic_Monitoring,Stimulation:Fracturing,"},{"title":"Advanced Multizone Stimulation Technology","description":"SPE Paper #95778 - Advanced Multizone Stimulation Technology","path":"/content/dam/ps/public/pe/contents/Papers_and_Articles/web/A_through_P/Advanced_Multizone_Stimulation_Technology_SPE95778.pdf","docCreatedDate":"2006-12-21T22:30:00.000-06:00","modifiedDate":"2006-12-21T22:30:00.000-06:00","publishDate":"2018-10-02T11:39:14.614-05:00","docdate":"2006-12-21T22:30:00.000-06:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Stimulation,Stimulation:Fracturing:Pinpoint_Stimulation,"},{"title":"PropStop AOGR 0209","description":"Treatment Stops Proppant Flow Back","path":"/content/dam/ps/public/pe/contents/Papers_and_Articles/web/A_through_P/0209-Eprint.pdf","docCreatedDate":"2009-03-02T22:30:00.000-06:00","modifiedDate":"2009-03-02T22:30:00.000-06:00","docdate":"2009-03-02T22:30:00.000-06:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Stimulation:Conductivity_Endurance:Proppant_Flowback,Stimulation:Conductivity_Endurance,"},{"title":"High-Density Monomer System for Conformance Applications","description":"This paper discusses an acrylate monomer system (AMS) that can be formulated in various brines at final densities up to 17 lbs/gal and used at temperatures between 32� and 175�F. Because the system works well in low temperatures; it can be used to mitigate offshore shallow-water flows in situations for which high injection pressures cannot be used. Other potential uses of the system are presented; such as sealing annular gas leaks; applications in gravel-packed wells; and dump-bailer applications.","path":"/content/dam/ps/public/pe/contents/Papers_and_Articles/web/A_through_P/H02377.asp","docCreatedDate":"2003-06-26T23:30:00.000-05:00","modifiedDate":"2003-06-26T23:30:00.000-05:00","publishDate":"2018-10-02T11:39:17.353-05:00","docdate":"2003-06-26T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,"},{"title":"Manufacturing Approach to Fracturing Limits","description":"In the Rocky Mountains in Wyoming, a manufacturing approach is\r\nbeing developed to enable fracture stimulation of hundreds of gas\r\nwells from one semipermanent location that can operate around the\r\nclock.","path":"/content/dam/ps/public/pe/contents/Papers_and_Articles/web/A_through_P/FracFactory.pdf","docCreatedDate":"2009-11-12T22:30:00.000-06:00","modifiedDate":"2009-11-16T22:30:00.000-06:00","docdate":"2009-11-12T22:30:00.000-06:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Stimulation:Water_Management,Stimulation:Fracturing,"},{"title":"Solvent-free consolidation system controls proppant flowback","description":"An aqueous-based consolidation system\naids in maintaining production\nrates in fracture-stimulated wells.","path":"/content/dam/ps/public/pe/contents/Papers_and_Articles/web/Q_through_Z/Solvent_freeconsolidationsystemcontrolsproppantflowback.pdf","docCreatedDate":"2009-11-17T22:30:00.000-06:00","modifiedDate":"2009-11-17T22:30:00.000-06:00","publishDate":"2018-10-02T11:39:17.353-05:00","docdate":"2009-11-17T22:30:00.000-06:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Stimulation:Conductivity_Endurance:Proppant_Flowback,Stimulation,Sand_Control:Stimulation_Services-Sand_Control,Stimulation:Fracturing,Stimulation:Conductivity_Endurance,"},{"title":"2009, May, Offshore - Ingenuity Underlines Kill and Salvage Operation in Bay of Bengal ","description":"A uniquely engineered kill and salvage operation employing a 150-hp ROV successfully secured a storm-damaged well and recovered a 217-ton (197-metric ton) BOP stack from more than 800 ft (244 m) of water in India\u2019s Bay of Bengal. In what may very well be an industry first, the multifaceted project overcame myriad technical challenges to avert any potentially catastrophic HSE incidents, while killing the well unconventionally via stinger and retrieving the BOP, subsea tree, and wellhead. ","path":"/content/dam/ps/public/project_management/contents/Papers_and_Articles/2009_Offshore_Ingenuity_BayofBengal.pdf","docCreatedDate":"2011-03-04T22:30:00.000-06:00","modifiedDate":"2011-03-04T22:30:00.000-06:00","docdate":"2011-03-04T22:30:00.000-06:00","languageSet":["English"],"accessType":"P","dataSearch":"brandgroups:Boots_&_Coots,|locations:Global,|prodgroups:Pressure_Control:Well_Control,"},{"title":"2007, January, World Oil - Selective Intervention via Material Squeeze Saves Papua New Guinea Find ","description":"Boots & Coots was asked by a North African national oil company to help it identify potential risks associated with aging production wells in close proximity to villages, industrial facilities, and environmentally sensitive areas.","path":"/content/dam/ps/public/project_management/contents/Papers_and_Articles/2007_WorldOil_Selective_Intervention.pdf","docCreatedDate":"2011-03-04T22:30:00.000-06:00","modifiedDate":"2011-03-04T22:30:00.000-06:00","docdate":"2011-03-04T22:30:00.000-06:00","languageSet":["English"],"accessType":"P","dataSearch":"brandgroups:Boots_&_Coots,|locations:Global,|prodgroups:Pressure_Control:Well_Control,"},{"title":"2010, January, World Oil - Analysis of Gas Flow Yields Recommendations for Best Cenenting Practices ","description":"An investigation into the flow of gas at a shallow water platform after the 9-5/8 inch casing was cemented revealed that following good cementing practices could have prevented a potentially serious well control incident.","path":"/content/dam/ps/public/project_management/contents/Papers_and_Articles/2010_WorldOil_Analysis_Gas_Flow.pdf","docCreatedDate":"2011-03-04T22:30:00.000-06:00","modifiedDate":"2011-03-04T22:30:00.000-06:00","docdate":"2011-03-04T22:30:00.000-06:00","languageSet":["English"],"accessType":"P","dataSearch":"brandgroups:Boots_&_Coots,|locations:Global,|prodgroups:Pressure_Control:Well_Control:Blowout_Response,Pressure_Control:Well_Control,"},{"title":"2004, January, World Oil - Controlling Sabotaged Oil Wells in a War Zone: Between Iraq and a Hard Spot ","description":"The war in Iraq commenced on March 20, 2003. In keeping with his past actions in Kuwait during the Gulf War in 1991, Saddam Hussein sabotaged a number of the Iraqi oil wells in the south Rumalia oil fields. Boots & Coots entered into a contract to assist the military in controlling these wells at an unprecedented point in time, while the war was in full swing.","path":"/content/dam/ps/public/project_management/contents/Papers_and_Articles/2004_WorldOil_Controlling_Oilwells.pdf","docCreatedDate":"2011-03-04T22:30:00.000-06:00","modifiedDate":"2011-03-04T22:30:00.000-06:00","docdate":"2011-03-04T22:30:00.000-06:00","languageSet":["English"],"accessType":"P","dataSearch":"brandgroups:Boots_&_Coots,|locations:Global,|prodgroups:Pressure_Control:Well_Control,"},{"title":"2001, July, JPT - Managing a Blowout: A Case Study","description":"During a well-control crisis, most operators aren\u2019t able to efficiently handle the numerous technical, organizational, and time demands while continuing to manage the other aspects of their business. At a Mississippi wellsite, Boots & Coots provided\non-site management during a well-control operation. ","path":"/content/dam/ps/public/project_management/contents/Papers_and_Articles/2001_JPT_ManagingABlowout.pdf","docCreatedDate":"2011-03-04T22:30:00.000-06:00","modifiedDate":"2011-03-04T22:30:00.000-06:00","docdate":"2011-03-04T22:30:00.000-06:00","languageSet":["English"],"accessType":"P","dataSearch":"brandgroups:Boots_&_Coots,|locations:Global,|prodgroups:Pressure_Control:Well_Control,"},{"title":"2010, February, International Fire Fighter - Emergency Response Planning in the Oilfield ","description":"Although the oilfield is a different work environment the basic response strategies are the same. The Incident Command System needs to be\nutilized and needs to be communicated through training and drills. Communication needs to be considered and everyone needs to know who is in charge.","path":"/content/dam/ps/public/project_management/contents/Papers_and_Articles/2010_Intl_Firefighter_Emerg_Response_Plan.pdf","docCreatedDate":"2011-07-18T23:30:00.000-05:00","modifiedDate":"2011-07-18T23:30:00.000-05:00","docdate":"2011-07-18T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"brandgroups:Boots_&_Coots,|locations:Global,|prodgroups:Pressure_Control:Prevention:Contingency_Planning_Services,"},{"title":"2007, February, Petroleum Africa - The Benefits of a Well Integrity Program: A Case Study ","description":"Boots & Coots was asked by a North African national oil company to help it identify potential risks associated with aging production wells in close proximity to villages, industrial facilities, and environmentally sensitive areas.","path":"/content/dam/ps/public/project_management/contents/Papers_and_Articles/2007_PetAfrica_Benefits_Well_Integrity.pdf","docCreatedDate":"2011-03-04T22:30:00.000-06:00","modifiedDate":"2011-03-04T22:30:00.000-06:00","docdate":"2011-03-04T22:30:00.000-06:00","languageSet":["English"],"accessType":"P","dataSearch":"brandgroups:Boots_&_Coots,|locations:Global,|prodgroups:Pressure_Control:Prevention:Risk_Management,"},{"title":"2013 E&P WellCall App","description":"New app provides instant well-control response.","path":"/content/dam/ps/public/project_management/contents/Papers_and_Articles/WELLCON-BootsCoots.pdf","docCreatedDate":"2013-11-01T23:30:00.000-05:00","modifiedDate":"2014-03-03T22:30:00.000-06:00","docdate":"2013-11-01T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"brandgroups:Boots_&_Coots,|locations:Global,|prodgroups:Pressure_Control:Prevention,"},{"title":"Reduced Density Keys Success in Cementing Geothermal Well","description":"This paper presents and describes the technology, products,\nand techniques combined and used by an electrical-power\nproduction company and an oilfield service company to reduce\nby more than 50% the expense of cementing surface casings\nof geothermal wells in the Heber Field of southern California","path":"/content/dam/ps/public/solutions/contents/Geothermal/related_docs/GRC_25225.pdf","docCreatedDate":"2009-09-29T23:30:00.000-05:00","modifiedDate":"2009-09-29T23:30:00.000-05:00","docdate":"2009-09-29T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Environmental_Challenges:Geothermal,|locations:Global,"},{"title":"Life Cycle Modeling of Wellbore Cement Systems Used for Enhanced Geothermal System Development","description":"COC and Halliburton, a partner in the study team for the EGS project, are using Halliburton\u2019s advanced WellLifeTM analysis software to pregict stresses on casing and cement in a wellbore\nsubjected to the temperature and pressure changes planned for\nthe project. A number of cementing options were modeled, including\nfoamed cement and cements resistant to attack by wet\nC02. Near wellbore stresses and rock physical properties collected\nduring early phases of the Coso EGS project provided input to\nthe model. Data collected by Brookhaven National Laboratory\nand Halliburton on the physical properties of cements were also\nused in the model.","path":"/content/dam/ps/public/solutions/contents/Geothermal/related_docs/GRC_21901.pdf","docCreatedDate":"2009-09-29T23:30:00.000-05:00","modifiedDate":"2009-09-29T23:30:00.000-05:00","docdate":"2009-09-29T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Environmental_Challenges:Geothermal,|locations:Global,"},{"title":"Application of Foamed Cement on Hawaiian Geothermal Well","description":"This paper presents a\ncase history in which foamed cement was used in multiple casing\nstrings of a Hawaiian geothermal wel","path":"/content/dam/ps/public/solutions/contents/Geothermal/related_docs/GRC_16767.pdf","docCreatedDate":"2009-09-29T23:30:00.000-05:00","modifiedDate":"2009-09-29T23:30:00.000-05:00","docdate":"2009-09-29T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Environmental_Challenges:Geothermal,|locations:Global,"},{"title":"Foam Cementing Geothermal 13 3/8-in Intermediate Casing: NGP #61-22","description":"This paper documents the analysis, planning, and execution of foamed-cementing operations used to successfully perform primary 13 3/8-in. casing cement work. Previous cementing practices are presented, as well as the advantages and design of foamed cementing for this application. A post-job analysis and cost comparison of foamed versus conventional cementing is also presented.","path":"/content/dam/ps/public/solutions/contents/Geothermal/related_docs/Foamed-Cementing-Geothermal.pdf","docCreatedDate":"2009-09-29T23:30:00.000-05:00","modifiedDate":"2009-09-29T23:30:00.000-05:00","docdate":"2009-09-29T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Environmental_Challenges:Geothermal,|locations:Global,"},{"title":"Foamed Latex Slurry and Reverse-Circulation Cementing Enable Drilling in Lost-circulation Zones","description":"cementing (RCC), foamed-cement slurries, latex additives, and a lightweight additive made of\ncrushed volcanic rock to cement a large-diameter casing through naturally fractured, geothermal zones presenting high risk for lost circulation (LC). This case-history paper presents product descriptions, design considerations, and job details applicable to the operation.","path":"/content/dam/ps/public/solutions/contents/Geothermal/related_docs/Foamed-Latex-Slurry_paper.pdf","docCreatedDate":"2009-09-29T23:30:00.000-05:00","modifiedDate":"2009-09-29T23:30:00.000-05:00","docdate":"2009-09-29T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Environmental_Challenges:Geothermal,|locations:Global,"},{"title":"Back to the future?","description":"Today\u2019s tough times call for new attitudes about mature fields.","path":"/content/dam/ps/public/solutions/contents/Mature_Fields/related_docs/EP-back-to-the-future.pdf","docCreatedDate":"2015-10-21T23:30:00.000-05:00","modifiedDate":"2015-10-21T23:30:00.000-05:00","publishDate":"2018-10-02T13:18:15.159-05:00","docdate":"2015-10-21T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Reservoir_Challenges:Mature_Fields,|locations:Global,"},{"title":"Назад в будущее?","description":"Непростые времена заставляют по-новому оценивать зрелые месторождения.","path":"/content/dam/ps/public/solutions/contents/Mature_Fields/related_docs/EP-back-to-the-future-RUS.pdf","docCreatedDate":"2015-10-01T23:30:00.000-05:00","modifiedDate":"2016-04-26T23:30:00.000-05:00","publishDate":"2018-10-02T13:18:15.159-05:00","docdate":"2015-10-01T23:30:00.000-05:00","languageSet":["Russian"],"accessType":"P","dataSearch":"custchallenges:Reservoir_Challenges:Mature_Fields,|locations:Asia:Northern_Asia:Russia_Northern_Asia,"},{"title":"American Oil & Gas Reporter: Outlook 2015: Q&A State of the Industry","description":"A special Q&A with Halliburton's Jeff Miller providing insights on general market expectations as well as specific focal points of technology development in 2015 and beyond.","path":"/content/dam/ps/public/solutions/contents/AOGR-Jeff-Miller-Halliburton.pdf","docCreatedDate":"2015-02-05T22:30:00.000-06:00","modifiedDate":"2015-02-05T22:30:00.000-06:00","docdate":"2015-02-05T22:30:00.000-06:00","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Reservoir_Challenges:Mature_Fields,Production_Challenges:Unconventional_Resources,Deepwater,|locations:Global,"},{"title":"Deepwater GOM Challenges Span Full Well Process","description":"In the deepwater Gulf of Mexico, the most recent success is frequently followed by the next great challenge.","path":"/content/dam/ps/public/solutions/contents/Deep_Water/related_docs/0509HEP_Halliburton.pdf","docCreatedDate":"2009-05-11T23:30:00.000-05:00","modifiedDate":"2009-05-11T23:30:00.000-05:00","docdate":"2009-05-11T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Drilling_Challenges:Deepwater_Drilling,Deepwater,|locations:Oceans_Gulfs_International_Waters:Gulf_of_Mexico,"},{"title":"Intervention applications enhance shallow-water GoM viability","description":"Operators can enjoy robust ROI even at lower prices.","path":"/content/dam/ps/public/solutions/contents/Deep_Water/related_docs/intervention-applications-enhance-shallow-water.pdf","docCreatedDate":"2017-05-22T23:30:00.000-05:00","modifiedDate":"2017-05-22T23:30:00.000-05:00","publishDate":"2018-10-02T13:16:43.847-05:00","docdate":"2017-05-22T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Deepwater,|locations:Oceans_Gulfs_International_Waters:Gulf_of_Mexico,"},{"title":"Design Optimization of Horizontal Wells With Multiple Hydraulic Fractures JPT Article","description":"An efficient way to improve the productivity of ultratight shale formations is to increase the density of hydraulic fractures.","path":"/content/dam/ps/public/solutions/contents/Shale/Papers_and_Articles/design-optimization-of-horizontal-wells.pdf","docCreatedDate":"2014-12-23T22:30:00.000-06:00","modifiedDate":"2014-12-23T22:30:00.000-06:00","publishDate":"2018-10-02T13:17:07.968-05:00","docdate":"2014-12-23T22:30:00.000-06:00","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Workflow_Integration:HalComplete:Shale_Field_Development,Production_Challenges:Unconventional_Resources,Formation_Challenges:Shale,|locations:Global,"},{"title":"ISG&OJ: A play for shale: Expanding resources in the European Union","description":"The International Shale Gas & Oil Journal (ISG&OJ) is a quarterly journal on shale gas and oil developments in politics,\neconomic, regulatory, tax & legal areas for practitioners and academics in the field. The journal draws on the experiences\nin USA, Canada and China, but the focus is mainly on Europe.","path":"/content/dam/ps/public/solutions/contents/Shale/Papers_and_Articles/ISGOJ-A-Play-for-Shale.pdf","docCreatedDate":"2014-11-01T23:30:00.000-05:00","modifiedDate":"2014-12-03T22:30:00.000-06:00","docdate":"2014-11-01T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Workflow_Integration:HalComplete:Shale_Field_Development,Production_Challenges:Unconventional_Resources,Formation_Challenges:Shale,|locations:Global,"},{"title":"DFIT Analysis When On Vacuum At The Surface","description":"A diagnostic fracture injection test (DFIT™) is an optimal type of test to perform using surface acquired\npressure data.","path":"/content/dam/ps/public/ts/contents/Papers_and_Articles/web/DFIT-Analysis-When-On-Vacuum-At-The-Surface.pdf","docCreatedDate":"2012-08-01T23:30:00.000-05:00","modifiedDate":"2015-10-09T23:30:00.000-05:00","docdate":"2012-08-01T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Reservoir_Testing_&_Analysis_(Reservoir_Testing_&_Sampling):Data_Acquisition_&_Sensors,"},{"title":"Remote Interference Monitoring of Offset Producers during Stimulation Operations","description":"The drilling of horizontal wells is increasing rapidly throughout the oil and gas industry due to enhanced\nreservoir contact and thereby enhanced well productivity, especially in unconventional, ultra low\npermeability areas.","path":"/content/dam/ps/public/ts/contents/Papers_and_Articles/web/Remote-Interference-Monitoring-of-Offset-Producers-during-Stimulation-Operations.pdf","docCreatedDate":"2012-08-01T23:30:00.000-05:00","modifiedDate":"2015-10-09T23:30:00.000-05:00","docdate":"2012-08-01T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Reservoir_Testing_&_Analysis_(Reservoir_Testing_&_Sampling):Data_Acquisition_&_Sensors,"},{"title":"Pressure Build-ups (PBU) vs. Static Gradient Survey Flowing Gradient Survey","description":"During a recent international marketing trip we have found that many operators of high rate gas and gas\ncondensate wells perform Static Gradient Surveys (SGS) and/or Flowing Gradient Surveys (FGS) as\nopposed to Pressure Build-up or drawdown tests.","path":"/content/dam/ps/public/ts/contents/Papers_and_Articles/web/Pressure-Buildups-vs-Static-Gradient-Survey-Flowing-Gradient-Survey.pdf","docCreatedDate":"2012-08-01T23:30:00.000-05:00","modifiedDate":"2015-10-09T23:30:00.000-05:00","docdate":"2012-08-01T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Reservoir_Testing_&_Analysis_(Reservoir_Testing_&_Sampling):Data_Acquisition_&_Sensors,"},{"title":"Step Rate Testing","description":"Injecting at pressures significantly below the parting pressure results in reduced oil recovery rates\nwhereas injecting at pressures above the parting pressure may result in loss or misdirection of the\ninjection fluid and reduced oil recovery.","path":"/content/dam/ps/public/ts/contents/Papers_and_Articles/web/Step-Rate-Testing.pdf","docCreatedDate":"2012-08-01T23:30:00.000-05:00","modifiedDate":"2015-10-09T23:30:00.000-05:00","docdate":"2012-08-01T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Reservoir_Testing_&_Analysis_(Reservoir_Testing_&_Sampling):Data_Acquisition_&_Sensors,"},{"title":"Summary of Halliburton SPIDR","description":"The benefits to running Halliburton's SPIDR® gauge system in lieu of running downhole gauges fall into\nfour categories: 1) Safety/Risk; 2) Cost Reduction; 3) Instrumentation; 4) Data Processing.","path":"/content/dam/ps/public/ts/contents/Papers_and_Articles/web/Summary-of-Halliburton-SPIDR.pdf","docCreatedDate":"2012-08-01T23:30:00.000-05:00","modifiedDate":"2015-10-09T23:30:00.000-05:00","docdate":"2012-08-01T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Reservoir_Testing_&_Analysis_(Reservoir_Testing_&_Sampling):Data_Acquisition_&_Sensors,"},{"title":"Gauge Selection for Pressure Transient Testing","description":"When conducting pressure transient tests (PTA) on high permeability reservoirs or for diagnostic fracture\ninjection tests, the importance of pressure gauge quality cannot be overstated.","path":"/content/dam/ps/public/ts/contents/Papers_and_Articles/web/Gauge-Selection-for-Pressure-Transient-Testing.pdf","docCreatedDate":"2012-08-01T23:30:00.000-05:00","modifiedDate":"2015-10-09T23:30:00.000-05:00","docdate":"2012-08-01T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Reservoir_Testing_&_Analysis_(Reservoir_Testing_&_Sampling):Data_Acquisition_&_Sensors,"},{"title":"How long do I test","description":"One of the most important questions in the design of a well test is, \u201cHow long do I test?\u201d","path":"/content/dam/ps/public/ts/contents/Papers_and_Articles/web/How-long-do-I-test.pdf","docCreatedDate":"2012-08-01T23:30:00.000-05:00","modifiedDate":"2015-10-09T23:30:00.000-05:00","docdate":"2012-08-01T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Reservoir_Testing_&_Analysis_(Reservoir_Testing_&_Sampling):Data_Acquisition_&_Sensors,"},{"title":"DFIT Testing Downhole vs Surface Data","description":"Halliburton has built its reputation as the best surface well testing company by providing a \u201cblind\u201d\ncomparison to downhole gauge data on a pressure transient test to new customers or in new areas.","path":"/content/dam/ps/public/ts/contents/Papers_and_Articles/web/DFIT-Testing-Downhole-vs-Surface-Data.pdf","docCreatedDate":"2012-08-01T23:30:00.000-05:00","modifiedDate":"2015-10-09T23:30:00.000-05:00","docdate":"2012-08-01T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Reservoir_Testing_&_Analysis_(Reservoir_Testing_&_Sampling):Data_Acquisition_&_Sensors,"},{"title":"Gauge Quality Will Affect Analysis","description":"In the past three decades there have been major technological improvements in the field of pressure\nmeasurement.","path":"/content/dam/ps/public/ts/contents/Papers_and_Articles/web/Gauge-Quality-Will-Affect-Analysis.pdf","docCreatedDate":"2012-08-01T23:30:00.000-05:00","modifiedDate":"2015-10-09T23:30:00.000-05:00","docdate":"2012-08-01T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Reservoir_Testing_&_Analysis_(Reservoir_Testing_&_Sampling):Data_Acquisition_&_Sensors,"},{"title":"Flow Rate Measurement Using the SPIDR","description":"For many years the Halliburton has\nbeen used to collect high quality surface pressure data.","path":"/content/dam/ps/public/ts/contents/Papers_and_Articles/web/Flow-Rate-Measurement-Using-the-SPIDR.pdf","docCreatedDate":"2012-08-01T23:30:00.000-05:00","modifiedDate":"2015-10-09T23:30:00.000-05:00","docdate":"2012-08-01T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Reservoir_Testing_&_Analysis_(Reservoir_Testing_&_Sampling):Data_Acquisition_&_Sensors,"},{"title":"The Effect of Wellbore Storage on Surface Data","description":"Engineers often ask how much of an effect wellbore storage has on surface data for a pressure-transient\ntest.","path":"/content/dam/ps/public/ts/contents/Papers_and_Articles/web/The-Effect-of-Wellbore-Storage-on-Surface-Data.pdf","docCreatedDate":"2012-08-01T23:30:00.000-05:00","modifiedDate":"2015-10-09T23:30:00.000-05:00","docdate":"2012-08-01T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Reservoir_Testing_&_Analysis_(Reservoir_Testing_&_Sampling):Data_Acquisition_&_Sensors,"},{"title":"DFIT Analysis","description":"Over the past few years at Halliburton we have seen a marked increase in the number of diagnostic\nfracture injection tests (DFIT™) performed along with an increased desire by our customers to get this\ntest data analyzed and interpreted for use in planning future stimulation work and for determining\nreservoir characteristics.","path":"/content/dam/ps/public/ts/contents/Papers_and_Articles/web/DFIT-Analysis-Explained.pdf","docCreatedDate":"2012-08-01T23:30:00.000-05:00","modifiedDate":"2015-10-09T23:30:00.000-05:00","docdate":"2012-08-01T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Reservoir_Testing_&_Analysis_(Reservoir_Testing_&_Sampling):Data_Acquisition_&_Sensors,"},{"title":"Mechanical Integrity Testing with the SPIDR","description":"Mechanical Integrity Tests (MIT) on producing wells and disposal wells are required by both state and\nfederal regulatory authorities.","path":"/content/dam/ps/public/ts/contents/Papers_and_Articles/web/Mechanical-Integrity-Testing-with-the-SPIDR.pdf","docCreatedDate":"2012-08-01T23:30:00.000-05:00","modifiedDate":"2015-10-09T23:30:00.000-05:00","docdate":"2012-08-01T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Reservoir_Testing_&_Analysis_(Reservoir_Testing_&_Sampling):Data_Acquisition_&_Sensors,"},{"title":"Communication Testing For Observation Well Having a Liquid Column","description":"Communication Testing For Observation Well Having a Liquid Column","path":"/content/dam/ps/public/ts/contents/Papers_and_Articles/web/Communication-Testing-For-Observation-Well-Having-a-Liquid-Column.pdf","docCreatedDate":"2012-08-01T23:30:00.000-05:00","modifiedDate":"2015-10-09T23:30:00.000-05:00","docdate":"2012-08-01T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Reservoir_Testing_&_Analysis_(Reservoir_Testing_&_Sampling):Data_Acquisition_&_Sensors,"},{"title":"Types of Well Tests","description":"Types of Well Tests: Build-Ups and Drawdowns","path":"/content/dam/ps/public/ts/contents/Papers_and_Articles/web/Types-of-Well-Tests.pdf","docCreatedDate":"2012-08-01T23:30:00.000-05:00","modifiedDate":"2015-10-09T23:30:00.000-05:00","docdate":"2012-08-01T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Reservoir_Testing_&_Analysis_(Reservoir_Testing_&_Sampling):Data_Acquisition_&_Sensors,"},{"title":"Understanding Wellbore Cooling","description":"Halliburton has been conducting pressure transient tests from the surface for years.","path":"/content/dam/ps/public/ts/contents/Papers_and_Articles/web/Understanding-Wellbore-Cooling.pdf","docCreatedDate":"2012-08-01T23:30:00.000-05:00","modifiedDate":"2015-10-09T23:30:00.000-05:00","docdate":"2012-08-01T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Reservoir_Testing_&_Analysis_(Reservoir_Testing_&_Sampling):Data_Acquisition_&_Sensors,"},{"title":"Data Requirements for DFIT Testing","description":"The bulk of the data recorded by SPIDR® surface pressure gauges over the years has been for pressure\ntransient analysis (PTA);","path":"/content/dam/ps/public/ts/contents/Papers_and_Articles/web/Data-Requirements-for-DFIT-Testing.pdf","docCreatedDate":"2012-08-01T23:30:00.000-05:00","modifiedDate":"2015-10-09T23:30:00.000-05:00","docdate":"2012-08-01T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Reservoir_Testing_&_Analysis_(Reservoir_Testing_&_Sampling):Data_Acquisition_&_Sensors,"},{"title":"Managed Pressure Flowback in Unconventional Reservoirs: A Permian Basin Case Study","description":"This paper focuses on the specific type of damage that can be created by aggressive flowback practices and how this damage can be mitigated by effectively monitoring and controlling initial rates and pressures.","path":"/content/dam/ps/public/ts/contents/Papers_and_Articles/web/URTEC-2461207-MS.pdf","docCreatedDate":"2016-08-01T23:30:00.000-05:00","modifiedDate":"2016-12-12T22:30:00.000-06:00","docdate":"2016-08-01T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Reservoir_Challenges:Improve_Reservoir_Productivity,|locations:Global,|prodgroups:Reservoir_Testing_&_Analysis_(Reservoir_Testing_&_Sampling):Surface_Well_Testing-Reservoir_Testing_&_Sampling,"},{"title":"Effects of Ambient Temperature Change on DFITs","description":"This article will show that the daily\npressure cycling continues even when a thermally compensated dual-quartz crystal pressure gauge for acquiring surface pressure data is used. It will also show that\nthe use of small-diameter capillary tubing to connect the pressure recorder to the wellhead has no effect on data quality.\nIt will be shown that the effect of\ndaily pressure cycling can be significantly reduced by insulating the wellhead and using injection fluids with low thermal expansion.","path":"/content/dam/ps/public/ts/contents/Papers_and_Articles/web/Effects_of_Ambient_Temperature_Change_on_DFITs.pdf","docCreatedDate":"2014-09-02T23:30:00.000-05:00","modifiedDate":"2014-09-05T23:30:00.000-05:00","docdate":"2014-09-02T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Reservoir_Testing_&_Analysis_(Reservoir_Testing_&_Sampling):Data_Acquisition_&_Sensors,"},{"title":"Properly Conducting a DFIT","description":"For the past several years, the majority of tests performed are pre-frac injection fall-off tests aka DFIT™\ntest (Diagnostic Fracture Injection Test).","path":"/content/dam/ps/public/ts/contents/Papers_and_Articles/web/Properly-Conducting-a-DFIT.pdf","docCreatedDate":"2012-08-01T23:30:00.000-05:00","modifiedDate":"2015-10-09T23:30:00.000-05:00","docdate":"2012-08-01T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Reservoir_Testing_&_Analysis_(Reservoir_Testing_&_Sampling):Data_Acquisition_&_Sensors,"},{"title":"Gas Well Deliverability Testing","description":"The \"deliverability\" of a gas well can be defined as the well's capacity to produce against the restrictions\nof the well bore and the system into which the well must flow.","path":"/content/dam/ps/public/ts/contents/Papers_and_Articles/web/Gas-Well-Deliverability-Testing.pdf","docCreatedDate":"2012-08-01T23:30:00.000-05:00","modifiedDate":"2015-10-09T23:30:00.000-05:00","docdate":"2012-08-01T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Reservoir_Testing_&_Analysis_(Reservoir_Testing_&_Sampling):Data_Acquisition_&_Sensors,"},{"title":"Water Gas Injector Testing from Surface Measurements","description":"Measuring surface injection pressures and rates are routine applications for Halliburton.","path":"/content/dam/ps/public/ts/contents/Papers_and_Articles/web/Water-Gas-Injector-Testing-from-Surface-Measurements.pdf","docCreatedDate":"2012-08-01T23:30:00.000-05:00","modifiedDate":"2015-10-09T23:30:00.000-05:00","docdate":"2012-08-01T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Reservoir_Testing_&_Analysis_(Reservoir_Testing_&_Sampling):Data_Acquisition_&_Sensors,"},{"title":"Injection Fall-off Testing using the SPIDR Gauge","description":"Testing wells from the surface has become increasingly accepted from operators both in conventional gas\nand gas condensate PTA applications but more recently in injection fall-off testing.","path":"/content/dam/ps/public/ts/contents/Papers_and_Articles/web/Injection-Fall-off-Testing-using-the-SPIDR-Gauge.pdf","docCreatedDate":"2012-08-01T23:30:00.000-05:00","modifiedDate":"2015-10-09T23:30:00.000-05:00","docdate":"2012-08-01T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Reservoir_Testing_&_Analysis_(Reservoir_Testing_&_Sampling):Data_Acquisition_&_Sensors,"},{"title":"Collect Accurate HP/HT Reservoir Samples - Hart's E&P Nov 2007","description":"Armada Sampling System - Pipe-deployed sampling system designed\nfor cased-hole applications with extended\nHP/HT exposure is an ideal sampling\noption where wire in the hole is problematic or unacceptable.","path":"/content/dam/ps/public/ts/contents/Papers_and_Articles/web/Armada_HEP1107.pdf","docCreatedDate":"2007-11-30T22:30:00.000-06:00","modifiedDate":"2007-12-05T22:30:00.000-06:00","docdate":"2007-11-30T22:30:00.000-06:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Reservoir_Testing_&_Analysis_(Reservoir_Testing_&_Sampling):Fluids_Sampling,"},{"title":"Long Term Well Monitoring","description":"Pressure Transient Analysis (PTA) is the primary tool for reservoir management.","path":"/content/dam/ps/public/ts/contents/Papers_and_Articles/web/Long-Term-Well-Monitoring.pdf","docCreatedDate":"2012-08-01T23:30:00.000-05:00","modifiedDate":"2015-10-09T23:30:00.000-05:00","docdate":"2012-08-01T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Reservoir_Testing_&_Analysis_(Reservoir_Testing_&_Sampling):Data_Acquisition_&_Sensors,"},{"title":"SPIDR Injection Testing Measure Rate and Pressure","description":"One the many unconventional applications for the SPIDR® gauge is as a tool for injection well tests.","path":"/content/dam/ps/public/ts/contents/Papers_and_Articles/web/SPIDR-Injection-Testing-Measure-Rate-and-Pressure.pdf","docCreatedDate":"2012-08-01T23:30:00.000-05:00","modifiedDate":"2015-10-09T23:30:00.000-05:00","docdate":"2012-08-01T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Reservoir_Testing_&_Analysis_(Reservoir_Testing_&_Sampling):Data_Acquisition_&_Sensors,"},{"title":"Testing Oil Producers from Surface Measurements","description":"The most common misconception that exists about the SPIDR® Well Testing System is that it is limited to\nonly dry gas applications.","path":"/content/dam/ps/public/ts/contents/Papers_and_Articles/web/Testing-Oil-Producers-from-Surface-Measurements.pdf","docCreatedDate":"2012-08-01T23:30:00.000-05:00","modifiedDate":"2015-10-09T23:30:00.000-05:00","docdate":"2012-08-01T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Reservoir_Testing_&_Analysis_(Reservoir_Testing_&_Sampling):Data_Acquisition_&_Sensors,"},{"title":"Acoustic Wireless Telemetry Reduces Uncertainty in Deepwater Drillstem Tests","description":"Advances in acoustic wireless telemetry have led to a novel and reliable alternative approach to not only operating downhole test tools in drillstem test operations, but also to providing real-time feedback of downhole tool status, surface read-out of bottomhole pressures and temperatures, and confirmation of bottomhole fluid sample conditions.\n","path":"/content/dam/ps/public/ts/contents/Papers_and_Articles/web/acoustic-wireless-telemetry-provides-enhanced-control.pdf","docCreatedDate":"2015-07-07T23:30:00.000-05:00","modifiedDate":"2015-08-07T23:30:00.000-05:00","docdate":"2015-07-07T23:30:00.000-05:00","docrefNum":"01-0001658-01","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Deepwater,|locations:Global,|prodgroups:Well_Testing,Reservoir_Testing_&_Analysis_(Reservoir_Testing_&_Sampling):Test_Tools_(Drillstem_Testing):Cased_Hole_Test_Tools,Subsea,"},{"title":"Reservoir Dimensioning using the SPIDR","description":"Operating oil and gas properties in the Gulf of Mexico can present many challenges on a daily\nbasis.","path":"/content/dam/ps/public/ts/contents/Papers_and_Articles/web/Reservoir-Dimensioning-using-the-SPIDR.pdf","docCreatedDate":"2012-08-01T23:30:00.000-05:00","modifiedDate":"2015-10-09T23:30:00.000-05:00","docdate":"2012-08-01T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Reservoir_Testing_&_Analysis_(Reservoir_Testing_&_Sampling):Data_Acquisition_&_Sensors,"},{"title":"Diagnostic Fracture Injection Tests in Ultra Low Perm Formations","description":"Pressure transient testing has been the standard method over the years to obtain important well\ninformation such as reservoir pressure, permeability, and skin in conventional reservoirs (permeability >1\nmd).","path":"/content/dam/ps/public/ts/contents/Papers_and_Articles/web/Diagnostic-Fracture-Injection-Tests-in-Ultra-Low-Perm-Formations.pdf","docCreatedDate":"2012-08-01T23:30:00.000-05:00","modifiedDate":"2015-10-09T23:30:00.000-05:00","docdate":"2012-08-01T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Reservoir_Testing_&_Analysis_(Reservoir_Testing_&_Sampling):Data_Acquisition_&_Sensors,"},{"title":"Two Rate Well Test","description":"However, with wells producing fluids, there may be a lack of knowledge regarding the presence of fluids\nin the well bore after shut-in.","path":"/content/dam/ps/public/ts/contents/Papers_and_Articles/web/Two-Rate-Well-Test.pdf","docCreatedDate":"2012-08-01T23:30:00.000-05:00","modifiedDate":"2015-10-09T23:30:00.000-05:00","docdate":"2012-08-01T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Reservoir_Testing_&_Analysis_(Reservoir_Testing_&_Sampling):Data_Acquisition_&_Sensors,"},{"title":"Communication Testing","description":"Communication Testing relies on changes in pressure at one location producing measurable pressures\nchanges at the second location. The most common communication tests used in the production of oil and\ngas are the interference test and the pulse test.","path":"/content/dam/ps/public/ts/contents/Papers_and_Articles/web/Communication-Testing.pdf","docCreatedDate":"2012-08-01T23:30:00.000-05:00","modifiedDate":"2015-10-09T23:30:00.000-05:00","docdate":"2012-08-01T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Reservoir_Testing_&_Analysis_(Reservoir_Testing_&_Sampling):Data_Acquisition_&_Sensors,"},{"title":"Multirate Well Testing","description":"This article describes different types of multi-rate tests, as well as addressing which type of well test\nshould be performed to meet a given objective.","path":"/content/dam/ps/public/ts/contents/Papers_and_Articles/web/Multirate-Well-Testing.pdf","docCreatedDate":"2012-08-01T23:30:00.000-05:00","modifiedDate":"2015-10-09T23:30:00.000-05:00","docdate":"2012-08-01T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Reservoir_Testing_&_Analysis_(Reservoir_Testing_&_Sampling):Data_Acquisition_&_Sensors,"},{"title":"Comparison of SPIDR vs DHG in High CO2 well","description":"Performing pressure transient analysis tests from the surface provides a no risk and low cost alternative\nto traditional downhole testing.","path":"/content/dam/ps/public/ts/contents/Papers_and_Articles/web/Comparison-of-SPIDR-vs-DHG-in-High-CO2-well.pdf","docCreatedDate":"2012-08-01T23:30:00.000-05:00","modifiedDate":"2015-10-09T23:30:00.000-05:00","docdate":"2012-08-01T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Reservoir_Testing_&_Analysis_(Reservoir_Testing_&_Sampling):Data_Acquisition_&_Sensors,"},{"title":"Utilizing the SPIDR for Gas Storage Well Tests","description":"As natural gas is seen across the globe as an efficient and environmentally friendly energy source, the\ndemand for it has grown steadily.","path":"/content/dam/ps/public/ts/contents/Papers_and_Articles/web/Utilizing-the-SPIDR-for-Gas-Storage-Well-Tests.pdf","docCreatedDate":"2012-08-01T23:30:00.000-05:00","modifiedDate":"2015-10-09T23:30:00.000-05:00","docdate":"2012-08-01T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Reservoir_Testing_&_Analysis_(Reservoir_Testing_&_Sampling):Data_Acquisition_&_Sensors,"},{"title":"Interpreting Pressure Transient Tests","description":"There is a lot of information present in a pressure transient test, and it is the reservoir engineer\u2019s job to\ncorrectly interpret that information in order to make the proper decisions regarding the production of the\nwell being tested.","path":"/content/dam/ps/public/ts/contents/Papers_and_Articles/web/Interpreting-Pressure-Transient-Tests.pdf","docCreatedDate":"2012-08-01T23:30:00.000-05:00","modifiedDate":"2015-10-09T23:30:00.000-05:00","docdate":"2012-08-01T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Reservoir_Testing_&_Analysis_(Reservoir_Testing_&_Sampling):Data_Acquisition_&_Sensors,"},{"title":"Interference Communication Monitoring during Frac Operations","description":"With the large number of wells being fractured in the tight sand and shale formations, it has become an\nincreasing concern to operators when adjacent producing wells are knocked \u201coffline\u201d by a nearby frac.","path":"/content/dam/ps/public/ts/contents/Papers_and_Articles/web/Interference-Communication-Monitoring-during-Frac-Operations.pdf","docCreatedDate":"2012-08-01T23:30:00.000-05:00","modifiedDate":"2015-10-09T23:30:00.000-05:00","docdate":"2012-08-01T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Reservoir_Testing_&_Analysis_(Reservoir_Testing_&_Sampling):Data_Acquisition_&_Sensors,"},{"title":"Thermal Compensation of High precision pressure gauges","description":"Precision pressure gauges based on the electrical resonance property of quartz crystal are considered\nthe highest accuracy pressure gauges available.","path":"/content/dam/ps/public/ts/contents/Papers_and_Articles/web/Thermal-Compensation-of-High-precision-pressure-gauges.pdf","docCreatedDate":"2012-08-01T23:30:00.000-05:00","modifiedDate":"2015-10-09T23:30:00.000-05:00","docdate":"2012-08-01T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Reservoir_Testing_&_Analysis_(Reservoir_Testing_&_Sampling):Data_Acquisition_&_Sensors,"},{"title":"How to ensure a successful test","description":"Running a successful well test not only provides information about the reservoir, it also makes it easier to\njustify future well tests.","path":"/content/dam/ps/public/ts/contents/Papers_and_Articles/web/How-to-ensure-a-successful-test.pdf","docCreatedDate":"2012-08-01T23:30:00.000-05:00","modifiedDate":"2015-10-09T23:30:00.000-05:00","docdate":"2012-08-01T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Reservoir_Testing_&_Analysis_(Reservoir_Testing_&_Sampling):Data_Acquisition_&_Sensors,"},{"title":"Candidate Selection for Surface Testing","description":"Over the past 26 years, SPIDR® has developed the SPIDR® well testing system into the preeminent method of testing gas and gas condensate wells from the surface. ","path":"/content/dam/ps/public/ts/contents/Papers_and_Articles/web/Candidate-Selection-for-Surface-Testing.pdf","docCreatedDate":"2012-08-01T23:30:00.000-05:00","modifiedDate":"2015-10-09T23:30:00.000-05:00","docdate":"2012-08-01T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Reservoir_Testing_&_Analysis_(Reservoir_Testing_&_Sampling):Data_Acquisition_&_Sensors,"},{"title":"Communication Interference Testing The Low Cost, No Risk Approach","description":"Interference testing, also known as a communication test, is a multiple well test that is used by operators\nto determine intra-field connectivity.","path":"/content/dam/ps/public/ts/contents/Papers_and_Articles/web/Communication-Interference-Testing-The-Low-Cost-No-Risk-Approach.pdf","docCreatedDate":"2012-08-01T23:30:00.000-05:00","modifiedDate":"2015-10-09T23:30:00.000-05:00","docdate":"2012-08-01T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Reservoir_Testing_&_Analysis_(Reservoir_Testing_&_Sampling):Data_Acquisition_&_Sensors,"},{"title":"Optimizing portfolios amid falling oil prices","description":"Numerical and statistical analyses of shale plays turn up some interesting results.","path":"/content/dam/ps/public/consulting/contents/Papers_and_Articles/EP-optimizing-portfolios-amid-falling-oil-prices.pdf","docCreatedDate":"2015-08-20T23:30:00.000-05:00","modifiedDate":"2015-08-20T23:30:00.000-05:00","publishDate":"2018-10-02T11:23:15.985-05:00","docdate":"2015-08-20T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Consulting_Services:Reservoir_Characterization-Consulting,Consulting_Services:Unconventional_Resources_Consulting,"},{"title":"Earth model assists Permian asset valuation","description":"This article describes a multi-domain model that Laredo, assisted by Halliburton Co., used to define the potential for the Permian-Garden City acreage","path":"/content/dam/ps/public/consulting/contents/Papers_and_Articles/OGJ-Earth-model-assists-Permian-asset-valuation.pdf","docCreatedDate":"2015-07-06T23:30:00.000-05:00","modifiedDate":"2015-08-20T23:30:00.000-05:00","publishDate":"2018-10-02T11:23:15.174-05:00","docdate":"2015-07-06T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Consulting_Services:Unconventional_Resources_Consulting,Integrated_Asset_Management:Unconventional_Field_Development,Integrated_Asset_Management:Mature_Field_Management,Consulting_Services:Reservoir_Characterization-Consulting,"},{"title":"Optimizing portfolios amid falling oil prices","description":"Numerical and statistical analyses of shale plays turn up some interesting results.","path":"/content/dam/ps/public/consulting/contents/Papers_and_Articles/optimizing-portfolios.pdf","docCreatedDate":"2015-06-01T23:30:00.000-05:00","modifiedDate":"2015-06-22T23:30:00.000-05:00","publishDate":"2018-10-02T11:23:15.174-05:00","docdate":"2015-06-01T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Consulting_Services:Unconventional_Resources_Consulting,"},{"title":"Breakers ","description":"This Best Practices article describes the latest Halliburton technology to\nhelp design engineers and fracturing customers select and use fracturing\nfluid breakers effectively. Chemical descriptions of breakers and the\nbreaking process are presented here. Note that this article focuses on\nwater-based fluids and does not cover oil-gelled fluids and breakers.","path":"/content/dam/ps/premium/pe/contents/Best_Practices/web/A_through_G/F3382.pdf","docCreatedDate":"2005-07-27T23:30:00.000-05:00","modifiedDate":"2005-07-27T23:30:00.000-05:00","publishDate":"2018-10-02T02:35:39.409-05:00","docdate":"2005-07-27T23:30:00.000-05:00","languageSet":["English"],"accessType":"R","dataSearch":"custchallenges:Production_Challenges:Conductivity_Enhancement,|locations:Global,|prodgroups:Stimulation:Fracturing,"},{"title":"Experience, Research Show Best Designs for Foam-diverted Acidizing (Paper / Article)","description":"Guidelines developed from field experience and laboratory tests increase the probability\nof removing damage and stimulating production with foam-diverted acid treatments.","path":"/content/dam/ps/premium/pe/contents/Papers_and_Articles/web/A_through_P/FoamDivertedAcidizing.pdf","docCreatedDate":"2008-09-22T08:00:00.000Z","modifiedDate":"2012-08-14T23:30:00.000-05:00","docdate":"2008-09-22T08:00:00.000Z","docrefNum":"","languageSet":["English"],"accessType":"R","dataSearch":"locations:Global,|prodgroups:Stimulation:Acidizing,"},{"title":"An Intelligent Approach","description":"Savio Saldanha discusses zonal control in multizone mature fields","path":"/content/dam/ps/public/wd/contents/Papers_and_Articles/OT-November2015.pdf","docCreatedDate":"2015-11-23T22:30:00.000-06:00","modifiedDate":"2015-11-23T22:30:00.000-06:00","publishDate":"2018-10-02T11:28:26.433-05:00","docdate":"2015-11-23T22:30:00.000-06:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Completion_Equipment_and_Services:Intelligent_Completions:Downhole_Control_Systems-WellDynamics,"},{"title":"Smart tools for zonal control - Upstream Technology ","description":"A new electro-hydraulic downhole control system minimises control lines while providing increased zonal control. ","path":"/content/dam/ps/public/wd/contents/Papers_and_Articles/2-16UpstreamTechnology-SmartPlex.pdf","docCreatedDate":"2016-02-12T22:30:00.000-06:00","modifiedDate":"2016-02-18T22:30:00.000-06:00","docdate":"2016-02-12T22:30:00.000-06:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Completion_Equipment_and_Services:Intelligent_Completions:Downhole_Control_Systems-WellDynamics,"},{"title":"Intelligent Completion Advances Target Improved Reliability in HPHT Conditions, Simplified Deployment","description":"New technologies helping to provide real-time fluid characteristics, faster or remote actuations and optimized production over life of the well.\n\nDrilling Contractor September 2017 Issue","path":"/content/dam/ps/public/wd/contents/Papers_and_Articles/DC-Sept17-IntelligentCompletions-REPRINT.pdf","docCreatedDate":"2017-10-10T23:30:00.000-05:00","modifiedDate":"2017-10-10T23:30:00.000-05:00","docdate":"2017-10-10T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Production_Challenges:Completion_Integrity,Deepwater:Increase_Reliability,Reservoir_Challenges:High_Pressure,Reservoir_Challenges:High_Temperature,|locations:Global,|prodgroups:Completion_Equipment_and_Services:Intelligent_Completions,Completion_Equipment_and_Services:Intelligent_Completions:Interval_Control-WellDynamics,Completion_Equipment_and_Services:Intelligent_Completions:Downhole_Control_Systems-WellDynamics,Completion_Equipment_and_Services:Intelligent_Completions:Surface_Control_and_Monitoring_Systems-WellDynamics,"},{"title":"A New Perspective on Behind-Casing Monitoring","description":"Kjetil Borgersen, Halliburton Completion Tools, explains how behind-casing monitoring can offer a new perspective on the reservoir.","path":"/content/dam/ps/public/wd/contents/Papers_and_Articles/LinX-OilfieldTechnology-April2019.pdf","docCreatedDate":"2019-05-17T10:15:00.000-05:00","modifiedDate":"2019-05-17T11:20:50.115-04:00","docdate":"2019-05-17T10:15:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Completion_Equipment_and_Services:Permanent_Monitoring-WellDynamics,"},{"title":"The Pressure Panacea (Oil & Gas Agenda April 2012)","description":"A few enthusiasts for managed pressure drilling (MPD) insist its acronym stands for \u2018makes problems disappear\u2019. Derrick Lewis, Halliburton\u2019s global operations manager, GeoBalance Managed Pressured Drilling Service, understands the technology well.","path":"/content/dam/ps/premium/ts/contents/Papers_and_Articles/web/Pressure_Panacea_Oil_Gas_Agenda_April2012.pdf","docCreatedDate":"2012-04-15T23:30:00.000-05:00","modifiedDate":"2013-07-04T23:30:00.000-05:00","docdate":"2012-04-15T23:30:00.000-05:00","languageSet":["English"],"accessType":"R","dataSearch":"custchallenges:Environmental_Challenges:Pressure,|brandgroups:Sperry_Drilling_Services,|locations:Global,|prodgroups:Drilling,Drilling:Optimized_Pressure_Drilling,Drilling:Optimized_Pressure_Drilling:Managed_Pressure_Drilling,"},{"title":"Chevron\u2019s Deepwater Bet","description":"Deepwater is a big play for Chevron \u2013 one which comes with challenges that the super major is working hard to overcome.","path":"/content/dam/ps/public/cps/contents/BD_Mktg/ChevronDWBet.html","docCreatedDate":"2014-12-03T08:00:00.000Z","modifiedDate":"2014-12-03T22:30:00.000-06:00","docdate":"2014-12-03T08:00:00.000Z","docrefNum":"","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Sand_Control:Screens:Inflow_Control,"},{"title":"Increasing SAGD Efficiency \u2013 As seen in Upstream Technology April 2015","description":"Increasing SAGD Efficiency \u2013 As seen in Upstream Technology April 2015","path":"/content/dam/ps/public/cps/contents/Papers_and_Articles/web/EquiFlowOptisteam-UpstreamTechnology.pdf","docCreatedDate":"2015-04-20T23:30:00.000-05:00","modifiedDate":"2015-04-20T23:30:00.000-05:00","docdate":"2015-04-20T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Sand_Control:Screens:Inflow_Control,"},{"title":"Building a Re-Frac Completion","description":"As operators continue to learn about unconventional resource plays, we know much of the hydrocarbon is left unrecovered in the wellbore even after stimulation. This has given rise to interest in re-fracturing of unconventional wellbores, which recently has shown it can bring wells back to near initial production levels and provide additional reserves. This article discusses how a re-frac ready wellbore can be constructed using current multistage completion technology.","path":"/content/dam/ps/public/cps/contents/Papers_and_Articles/web/1-16HFJournal-Building-Re-Frac-Ready-Completion.pdf","docCreatedDate":"2016-01-15T22:30:00.000-06:00","modifiedDate":"2016-01-15T22:30:00.000-06:00","docdate":"2016-01-15T22:30:00.000-06:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Completion_Equipment_and_Services:Unconventional_Completions:Frac_Sleeve_Systems,"},{"title":"Illusion&reg; Spire Dissolvable Frac Plug","description":"Download the Halliburton DRIVE&trade; app, Scan this flyer, and experience the Illusion Spire plug in augmented reality","path":"/content/dam/ps/public/cps/contents/Papers_and_Articles/web/Illusion-Spire-Ad.pdf","docCreatedDate":"2019-03-01T16:14:00.000-06:00","modifiedDate":"2019-02-27T17:16:31.135-05:00","docdate":"2019-03-01T16:14:00.000-06:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Completion_Equipment_and_Services:Unconventional_Completions:Drillable_Tools:Dissolvable_Tools,"},{"title":"BHP Shenzi GoM Project","description":"After six years, BHP Billiton\u2019s Shenzi field is still the top-performing deepwater development\nin the Gulf of Mexico.","path":"/content/dam/ps/public/cps/contents/Papers_and_Articles/web/BHP-BILLITON-SHENZI.pdf","docCreatedDate":"2015-04-13T23:30:00.000-05:00","modifiedDate":"2015-04-13T23:30:00.000-05:00","docdate":"2015-04-13T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Drilling_Challenges:Deepwater_Drilling,Deepwater,Workflow_Integration:HalComplete:Deepwater_Completions,|locations:Global,|prodgroups:Completion_Equipment_and_Services:Liner_Hangers:Expandable_Liner_Hanger,Sand_Control:Downhole_Tools-Sand_Control:Tool_Systems-Sand_Control,Sand_Control:Downhole_Tools-Sand_Control,Sand_Control_Tools,Completion_Equipment_and_Services:Isolation_Barrier_Valves,"},{"title":"Open-hole, multizone completions drive development of single-trip sand control technologies - Drilling Contractor July 2017 ","description":"Reducing completion times \u2013 Endurance Hydraulic Screen®","path":"/content/dam/ps/public/cps/contents/Papers_and_Articles/web/DrillingContractor-SandControl-July2017.docx","docCreatedDate":"2017-07-18T08:00:00.000Z","modifiedDate":"2017-07-18T23:30:00.000-05:00","docdate":"2017-07-18T08:00:00.000Z","docrefNum":"","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Reservoir_Challenges:Mature_Fields,Production_Challenges:Sand_Production,Workflow_Integration:HalComplete:Deepwater_Completions,|locations:Global,|prodgroups:Sand_Control:Screens:Compliant_Screens,"},{"title":"The American Oil & Gas Reporter: Multilaterals Hold Promise For Shales","description":"American Oil and Gas Reporter Article, July 2017","path":"/content/dam/ps/public/cps/contents/Papers_and_Articles/web/AOGR-MLT-Promise-for-Shales.pdf","docCreatedDate":"2017-07-27T23:30:00.000-05:00","modifiedDate":"2017-07-27T23:30:00.000-05:00","docdate":"2017-07-27T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Production_Challenges:Unconventional_Resources,|locations:Global,|prodgroups:Completion_Equipment_and_Services,Multilateral,"},{"title":"Crafting a Better Frac - New Technology Magazine Nov. 2014","description":"Halliburton\u2019s RapidStart Initiator\nCT sleeve allows operators to conduct a casing integrity test before stimulation, and achieve compliance with Directive 83, an Alberta Energy Regulator requirement that companies validate casing integrity prior to stimulating the wellbore.","path":"/content/dam/ps/public/cps/contents/Papers_and_Articles/web/NewTechnology-CraftingaBetterFrac.pdf","docCreatedDate":"2014-11-05T22:30:00.000-06:00","modifiedDate":"2014-12-16T22:30:00.000-06:00","docdate":"2014-11-05T22:30:00.000-06:00","docrefNum":"New Technology article Nov. 2014","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Completion_Equipment_and_Services:Unconventional_Completions:Frac_Sleeve_Systems,"},{"title":"Control System Optimizes Production - OTC Show Daily May 2016","description":"Technology allows users to close ICVs from any position and also allows for multistep positioning,\nreducing the number of pressure cycles needed to step through the positions of an ICV.","path":"/content/dam/ps/public/cps/contents/Papers_and_Articles/web/SmartPlex-ShowDaily-May2016.pdf","docCreatedDate":"2016-05-02T23:30:00.000-05:00","modifiedDate":"2016-06-15T23:30:00.000-05:00","docdate":"2016-05-02T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Reservoir_Challenges:Mature_Fields,|locations:Global,|prodgroups:Completion_Equipment_and_Services:Intelligent_Completions:Downhole_Control_Systems-WellDynamics,Completion_Equipment_and_Services:Intelligent_Completions,"},{"title":"Enhancing Oil Recovery with AICDs - Offshore World Jan 2015","description":"AICDs are a new generation of ICDs with innovative fluid dynamics technology which continues\nrestricting the production of gas and water at breakthrough improving sweep efficiency and reducing operating costs.","path":"/content/dam/ps/public/cps/contents/Papers_and_Articles/web/EnhancingOilRecoverywAICD-OffshoreWorld.pdf","docCreatedDate":"2015-02-24T22:30:00.000-06:00","modifiedDate":"2015-02-24T22:30:00.000-06:00","docdate":"2015-02-24T22:30:00.000-06:00","docrefNum":"Offshore World","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Production_Challenges:Produced_Water,Production_Challenges:Control_of_Water_and_Gas_Production,Production_Challenges:Improving_Oil_Recovery,|locations:Global,|prodgroups:Sand_Control:Screens:Inflow_Control,"},{"title":"Unlocking Production with Multilateral Wells - Harts E&P August 2018","path":"/content/dam/ps/public/cps/contents/Papers_and_Articles/web/Unlocking-Production-with-MLT-Wells-Harts-8-18.pdf","docCreatedDate":"2018-08-07T23:30:00.000-05:00","modifiedDate":"2018-08-07T23:30:00.000-05:00","docdate":"2018-08-07T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Multilateral:Multilateral_Completion_Systems,Multilateral,"},{"title":"HESS: Advanced Technologies Achieve Exceptional Drilling and Completion Successes","description":"Hess Stampede Profile September 2018","path":"/content/dam/ps/public/cps/contents/Papers_and_Articles/web/halliburton-hess-Profile.pdf","docCreatedDate":"2018-09-21T09:11:00.000-05:00","modifiedDate":"2018-10-02T11:17:18.142-05:00","publishDate":"2018-09-24T09:14:53.025-05:00","docdate":"2018-09-21T09:11:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Deepwater,Workflow_Integration:HalComplete:Deepwater_Completions,|locations:Global,|prodgroups:Completion_Equipment_and_Services:Liner_Hangers:Expandable_Liner_Hanger,"},{"title":"The American Oil & Gas Reporter: Multilateral Architectures Hold Major Potential In Resource Plays","description":"HOUSTON\u2014Multilateral technology has significant potential for improving\nefficiencies, lowering development costs and optimizing production and\nrecovery rates in tight oil and shale gas plays.","path":"/content/dam/ps/public/cps/contents/Papers_and_Articles/web/multilateral-architectures-hold-major-potential.pdf","docCreatedDate":"2017-08-01T23:30:00.000-05:00","modifiedDate":"2017-09-19T23:30:00.000-05:00","docdate":"2017-08-01T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Production_Challenges:Unconventional_Resources,Production_Challenges:Horizontal_Completions,Reducing_Costs,Production_Challenges:Production_Optimization,Formation_Challenges:Shale,|locations:Global,|prodgroups:Completion_Equipment_and_Services,Multilateral,"},{"title":"Liner hanger systems bump up pressure ratings, load capacity - Drilling Contractor July 2014","description":"Increasing fracture pressures, risk profiles push market for ELH, hybrid and wireless tools","path":"/content/dam/ps/public/cps/contents/Papers_and_Articles/web/ELH_DrillingContractor_July2014.docx","docCreatedDate":"2014-07-10T23:30:00.000-05:00","modifiedDate":"2014-07-17T23:30:00.000-05:00","docdate":"2014-07-10T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Drilling_Challenges:Extended_Reach_Drilling_(ERD),Production_Challenges:Unconventional_Resources,|locations:Global,|prodgroups:Completion_Equipment_and_Services:Liner_Hangers:Expandable_Liner_Hanger,"},{"title":"Project Review Jack-St Malo - As Seen in Upstream Technology April 2015","description":"ESTMZ system enhances recovery for Chevron in the notoriously difficult Lower Tertiary.","path":"/content/dam/ps/public/cps/contents/Papers_and_Articles/web/ESTMZ-Chevron-UpstreamTechnology.pdf","docCreatedDate":"2015-04-20T23:30:00.000-05:00","modifiedDate":"2015-04-20T23:30:00.000-05:00","docdate":"2015-04-20T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Production_Challenges:Sand_Production,Workflow_Integration:HalComplete:Deepwater_Completions,|locations:Global,|prodgroups:Sand_Control_Tools,Sand_Control:Downhole_Tools-Sand_Control,Sand_Control:Downhole_Tools-Sand_Control:Tool_Systems-Sand_Control,"},{"title":"Raising the Bar for Liner Hangers - As Seen in Upstream Technology April 2015","description":"Heavier parent casing in increasingly deep waters has posed challenges for conventional ELH. Halliburton's new metal-to-metal sealing system is designed for extreme conditions. ","path":"/content/dam/ps/public/cps/contents/Papers_and_Articles/web/VersaFlexXtremeGrip-UpstreamTechnology.pdf","docCreatedDate":"2015-04-20T23:30:00.000-05:00","modifiedDate":"2015-04-20T23:30:00.000-05:00","docdate":"2015-04-20T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Deepwater,Workflow_Integration:HalComplete:Deepwater_Completions,Drilling_Challenges:Deepwater_Drilling,|locations:Global,|prodgroups:Completion_Equipment_and_Services:Liner_Hangers:Expandable_Liner_Hanger,"},{"title":"Compliant Screen Raises the Bar for Successful, Cost-Efficient Sand Control","description":"World-Oil article printed July 2018","path":"/content/dam/ps/public/cps/contents/Papers_and_Articles/web/EHS-WO-0718.pdf","docCreatedDate":"2018-07-30T23:30:00.000-05:00","modifiedDate":"2018-07-30T23:30:00.000-05:00","docdate":"2018-07-30T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Production_Challenges:Sand_Production,|locations:Global,|prodgroups:Sand_Control:Screens:Compliant_Screens,"},{"title":"Completion design must advance to improve access to Lower Tertiary","description":"Service providers working on next generation of multi-zone systems","path":"/content/dam/ps/public/cps/contents/Papers_and_Articles/web/Offshore-2017-Completion-Design-Improve-Lower-Tertiary.pdf","docCreatedDate":"2017-09-14T23:30:00.000-05:00","modifiedDate":"2017-10-11T23:30:00.000-05:00","docdate":"2017-09-14T23:30:00.000-05:00","docrefNum":"Offshore","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Workflow_Integration:HalDrill:Reservoir_Contact,Deepwater:Reduce_Uncertainty:Increase_Reservoir_Production,Production_Challenges:Unconventional_Resources,Reservoir_Challenges:Controlling_and_Monitoring_Multiple_Reservoirs,Deepwater,Workflow_Integration:HalComplete:Deepwater_Completions,|locations:Global,|prodgroups:Sand_Control:Multizone_Sand_Control_Systems,Multilateral,Completion_Equipment_and_Services,Multilateral:Multilateral_Completion_Systems,Completion_Equipment_and_Services:Intelligent_Completions:Interval_Control-WellDynamics,"},{"title":"Getting Your DUCs in a Row","description":"Halliburton reveals how aging DUC wells do not need to spoil completions","path":"/content/dam/ps/public/cps/contents/Papers_and_Articles/web/Getting-DUC-in-a-Row-OT-May2017.pdf","docCreatedDate":"2017-06-01T23:30:00.000-05:00","modifiedDate":"2017-06-14T23:30:00.000-05:00","docdate":"2017-06-01T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Production_Challenges:Unconventional_Resources,Production_Challenges:Horizontal_Completions,|locations:Global,|prodgroups:Completion_Equipment_and_Services:Unconventional_Completions:Frac_Sleeve_Systems,"},{"title":"Drilling Contractor: Collaboration Between Operator, Service Company Reduces Completion Time on Deepwater Egina Field","description":"Total and Halliburton reduce lower completions time by 60% in Egina Field.Total and Halliburton reduce lower completions time by 60% in Egina Field.","path":"/content/dam/ps/public/cps/contents/Papers_and_Articles/web/drilling-contractor-total-halliburton.pdf","docCreatedDate":"2018-09-21T09:08:00.000-05:00","modifiedDate":"2018-10-02T11:17:17.430-05:00","docdate":"2018-09-21T09:08:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Sand_Control,Sand_Control:Downhole_Tools-Sand_Control:Tool_Systems-Sand_Control,Sand_Control:Downhole_Tools-Sand_Control,Sand_Control_Tools,Completion_Equipment_and_Services:Intelligent_Completions:Downhole_Control_Systems-WellDynamics,"},{"title":"Jack/St. Malo Expanding Chevron's Reach in the deepwater U.S. Gulf of Mexico","description":"Oil and Gas Journal Article featuring the Halliburton ESTMZ system","path":"/content/dam/ps/public/cps/contents/Papers_and_Articles/web/CHEVRON-JACK-ST-MALO-PUBLICATION.pdf","docCreatedDate":"2016-07-25T23:30:00.000-05:00","modifiedDate":"2016-07-25T23:30:00.000-05:00","docdate":"2016-07-25T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Sand_Control:Multizone_Sand_Control_Systems,"},{"title":"Retrievable Fracturing Sleeve System and Chemical Diversion Packer for Multi-Stage Re-Stimulation of Unconventional Wellbores","description":"With the growing number of unconventional resource targeting wellbores that are experiencing production declines, re-fracturing operations can\nbring renewed production to a well, enhancing overall recovery. However, for any re-fracturing process to bring value to the industry, the process must accomplish key goals. Such goals include creating meaningful production increase, ideally across the entire target pay zone, and ensuring the method used brings a rate of return justifying the investment in the re-fracturing operation.","path":"/content/dam/ps/public/cps/contents/Papers_and_Articles/web/1-16HFJournal-Retrievable-Frac-Sleeve-System.pdf","docCreatedDate":"2016-01-15T22:30:00.000-06:00","modifiedDate":"2016-01-15T22:30:00.000-06:00","docdate":"2016-01-15T22:30:00.000-06:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Completion_Equipment_and_Services:Unconventional_Completions:Frac_Sleeve_Systems,"},{"title":"Viable Option or Risky Business - Oilfield Technology","description":"Increasingly sophisticated technology behind the cementing multistage fracturing sleeves.","path":"/content/dam/ps/public/cps/contents/Papers_and_Articles/web/Halliburton-OT-February-2015.pdf","docCreatedDate":"2015-02-02T22:30:00.000-06:00","modifiedDate":"2015-08-20T23:30:00.000-05:00","docdate":"2015-02-02T22:30:00.000-06:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Completion_Equipment_and_Services:Unconventional_Completions:Frac_Sleeve_Systems,"},{"title":"Reservoir complexity, corrosion, mobility drive innovation in pre-salt completion strategies, design (Larger Casing, Liners) - Drilling Contractor May/June 2016 ","description":"When it comes completion design, well architecture, formation pressure and wellbore cleaning are important considerations for handling the bigger casing strings typically needed to produce in the pre-salt basins. This also impacts selection of liners and liner hanger systems.","path":"/content/dam/ps/public/cps/contents/Papers_and_Articles/web/ELH-DrillingContractor-June2016.pdf","docCreatedDate":"2016-06-01T23:30:00.000-05:00","modifiedDate":"2016-06-15T23:30:00.000-05:00","docdate":"2016-06-01T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Deepwater,Workflow_Integration:HalComplete:Deepwater_Completions,Salt_Challenges,|locations:Global,|prodgroups:Completion_Equipment_and_Services:Liner_Hangers:Expandable_Liner_Hanger,"},{"title":"Isolation Barrier Valves Installed Successfully in Deepwater Gulf of Guinea","description":"A major operator manages multiple deepwater projects in the Gulf of Guinea. The operator in a recent 44-well project required an ISO-qualified isolation barrier valve.","path":"/content/dam/ps/public/cps/contents/Papers_and_Articles/web/FS2-IBV-Guinea-JPT-May2019.pdf","docCreatedDate":"2019-05-17T11:20:00.000-05:00","modifiedDate":"2019-05-17T12:24:54.234-04:00","docdate":"2019-05-17T11:20:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Completion_Equipment_and_Services:Isolation_Barrier_Valves,"},{"title":"Back to Deep Water","description":"Activity in the Gulf of Mexico is increasing as new players, technology, and tiebacks deliver change - Harts E&P May issue 2019","path":"/content/dam/ps/public/cps/contents/Papers_and_Articles/web/back-to-deep-water-harts-may2019.pdf","docCreatedDate":"2019-05-20T13:32:00.000-05:00","modifiedDate":"2019-05-20T14:35:05.364-04:00","docdate":"2019-05-20T13:32:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Completion_Equipment_and_Services:Liner_Hangers:Expandable_Liner_Hanger,Completion_Equipment_and_Services:Liner_Hangers,"},{"title":"Oilfield Technology: Engineered Solutions for Smarter Completions","description":"Kjetil Borgersen, Halliburton Completion Tools, explains how behind-casing monitoring can offer a new perspective on the reservoir.","path":"/content/dam/ps/public/cps/contents/Papers_and_Articles/web/oilfield-technology.pdf","docCreatedDate":"2019-04-01T10:54:00.000-05:00","modifiedDate":"2019-05-22T11:57:30.760-04:00","docdate":"2019-04-01T10:54:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Completion_Equipment_and_Services,"},{"title":"Hart Energy: Industry\u2019s First Dissolvable Long-Range Frac Plug \u2013 Illusion® High-Expansion Frac Plug","description":"The Illusion® High-Expansion (HE) dissolvable frac plug is the industry\u2019s first dissolving plug designed for use in a wider range of casing sizes than standard plugs. ","path":"/content/dam/ps/public/cps/contents/Papers_and_Articles/web/hart-energy-illusion-april-2019.pdf","docCreatedDate":"2019-04-01T08:41:00.000-05:00","modifiedDate":"2019-05-17T09:44:47.545-04:00","docdate":"2019-04-01T08:41:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Completion_Equipment_and_Services:Unconventional_Completions:Drillable_Tools:Dissolvable_Tools,"},{"title":"E&P Magazine - 2018 Offshore Technology Yearbook","description":"Offshore Technology Aims at Lowering Breakeven Economics","path":"/content/dam/ps/public/ss/contents/Papers_and_Articles/web/2018-Offshore-Technology-Yearbook-JetPulse-ALD.pdf","docCreatedDate":"2018-04-23T23:30:00.000-05:00","modifiedDate":"2018-04-23T23:30:00.000-05:00","docdate":"2018-04-23T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"brandgroups:Sperry_Drilling_Services,|locations:Global,|prodgroups:LWD,Drilling:Telemetry,"},{"title":"Oilfield Technology: Increasing Drilling Efficiency with Telemetry","description":"Paul Cooper, PhD, Halliburton, USA, shows how high-speed telemetry can help increase drilling efficiency.","path":"/content/dam/ps/public/ss/contents/Papers_and_Articles/web/oilfield-technology-jetpulse-nov-2017.pdf","docCreatedDate":"2017-12-27T22:30:00.000-06:00","modifiedDate":"2017-12-28T22:30:00.000-06:00","publishDate":"2018-10-02T11:06:54.850-05:00","docdate":"2017-12-27T22:30:00.000-06:00","languageSet":["English"],"accessType":"P","dataSearch":"brandgroups:Sperry_Drilling_Services,|locations:Global,|prodgroups:Drilling:Telemetry,"},{"title":"World Oil: Turbodrills reduce well time and deliver lower cost per foot in hard and abrasive formations","description":"Downhole turbines are a solution in hard and abrasive formations, otherwise inaccessible with conventional motors.","path":"/content/dam/ps/public/ss/contents/Papers_and_Articles/web/world-oil-turbodrills-feb-2018.pdf","docCreatedDate":"2018-02-01T22:30:00.000-06:00","modifiedDate":"2018-03-19T23:30:00.000-05:00","docdate":"2018-02-01T22:30:00.000-06:00","languageSet":["English"],"accessType":"P","dataSearch":"brandgroups:Sperry_Drilling_Services,|locations:Global,|prodgroups:Directional_Drilling:Turbines:Turbopower_Turbodrilling,Directional_Drilling:Turbines,"},{"title":"Resin System Facilitates Shut Off of Difficult Gas Well","description":"An advanced, solids-free epoxy resin was applied for gas shut-off in a difficult-to abandon well in Colombia. The versatile system allowed the well to be brought back\ninto line with governmental regulations.","path":"/content/dam/ps/public/cem/contents/Papers_and_Articles/print/2015-ResinSystemFacilitatesShutOffOfDifficultGasWell-WorldOil.pdf","docCreatedDate":"2016-01-29T22:30:00.000-06:00","modifiedDate":"2016-01-29T22:30:00.000-06:00","docdate":"2016-01-29T22:30:00.000-06:00","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Well_Construction_Challenges:Abandonment,|locations:Global,|prodgroups:Cementing,Cementing:Cementing_Chemistry,Cementing:Environmental_Cementing_Systems,Cementing:Cementing_Solutions,Cementing:Cementing_Solutions:Resins,Cementing:Cementing_Products_and_Processes,"},{"title":"Shale oil and a problem well-stated","description":"The South Cana portion of The Woodford Shale presented NewField exploration worked to enhance wellbore integrity by striving to address risk of annular pressure. ","path":"/content/dam/ps/public/cem/contents/Papers_and_Articles/print/Harts-EP_Nov-2013_A-Problem-Well-Stated.pdf","docCreatedDate":"2013-11-01T23:30:00.000-05:00","modifiedDate":"2014-01-08T22:30:00.000-06:00","docdate":"2013-11-01T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Well_Construction_Challenges:Zonal_isolation,Workflow_Integration:HalDrill:Drilling_Performance:Drilling_Performance-Execution:Wellbore_Integrity,Production_Challenges:Long_Term_Zonal_Isolation,Formation_Challenges:Shale,Production_Challenges:Improve_Wellbore_Integrity,Well_Control_Challenges:Ensure_Well_Integrity,Workflow_Integration:HalComplete:Shale_Field_Development,|locations:Global,|prodgroups:Cementing,Cementing:Cementing_Chemistry,Cementing:Cementing_Products_and_Processes,Cementing:Cementing_Solutions,Cementing:Cementing_Chemistry:Efficiency_Fluid,"},{"title":"E&P: Using buoyancy-assisted casing equipment to extend lateral reach","description":"A major challenge in lengthy horizontal or highly deviated wellbores is running the casing string to depth. Drag between the casing string and the formation can often exceed the load capacity of the casing hook, preventing tools from reaching optimal setting depth.","path":"/content/dam/ps/public/cem/contents/Papers_and_Articles/web/using-buoyancy-assisted-casing-equipment-to-extend-lateral-reach.pdf","docCreatedDate":"2017-10-24T23:30:00.000-05:00","modifiedDate":"2017-10-24T23:30:00.000-05:00","docdate":"2017-10-24T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Production_Challenges:Unconventional_Resources,|locations:Global,|prodgroups:Cementing:Casing_Equipment:Float_Equipment,Cementing:Casing_Equipment:Casing_Attachments,Cementing:Casing_Equipment,"},{"title":"Fresh Approach Pays Off -- Innovation of WellLock resin system","description":"This article originally ran in the \"Innovators\" section of the March 2015 issue of Canada's \"New Technology\" Magazine. It features the development work toward what became WellLock resin by Dr. P. Jones.","path":"/content/dam/ps/public/cem/contents/Papers_and_Articles/web/P_through_Z/FreshApproachPaysOff-pg21-22-NewTechnology-Mar2015.pdf","docCreatedDate":"2015-03-24T23:30:00.000-05:00","modifiedDate":"2015-03-24T23:30:00.000-05:00","publishDate":"2018-10-02T11:32:31.740-05:00","docdate":"2015-03-24T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Well_Construction_Challenges:Zonal_isolation,Production_Challenges:Long_Term_Zonal_Isolation,Production_Challenges:Improve_Wellbore_Integrity,Workflow_Integration:HalDrill:Drilling_Performance:Drilling_Performance-Execution:Wellbore_Integrity,|locations:Global,|prodgroups:Cementing,Cementing:Cementing_Chemistry,Cementing:Cementing_Products_and_Processes,Cementing:Cementing_Solutions,Cementing:Cementing_Solutions:Resins,Cementing:Deep_Water_Cementing:Annular_Pressure,Cementing:Deep_Water_Cementing:Plug_Setting,Cementing:Deep_Water_Cementing:Riserless_Cementing,Cementing:Deep_Water_Cementing:Corrosive_Environments,"},{"title":"Pigging for Flow Assurance in Oil and Gas Pipelines","description":"Oil & gas pipelines \u2013 whether for onshore or offshore, for feedstock or product - need to be regular maintenance and\ninspection to remove debris, which is come from the transported fluids themselves while others can be caused by\nchemical reactions between fluids and system metallurgy or through a combination of different fluids in transport lines,\nfor insuring the pipeline integrity and flow assurance. Maintaining or increasing flow, pipeline pigs are necessity at\nregular intervals through the line to remove debris before it can become an issue. The article explains on various pigging\nsolutions for the future strategies for pipeline cleaning.","path":"/content/dam/ps/public/bc/contents/Papers_and_Articles/2015-Pigging-FlowAssurance-Article.pdf","docCreatedDate":"2015-05-01T23:30:00.000-05:00","modifiedDate":"2015-07-07T23:30:00.000-05:00","docdate":"2015-05-01T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Production_Challenges,|locations:Global,|prodgroups:Pipeline_and_Process_Services,"},{"title":"2009, May, E&P - Versatile HWO/Snubbing Units Offer Multiple Benefits Over Conventional Rigs ","description":"From its inception solely as a mechanism\nfor handing tubulars during well control\noperations, hydraulic snubbing technology has evolved into a mechanism that can perform any operation once considered the sole jurisdiction of conventional drilling and workover rigs.","path":"/content/dam/ps/public/bc/contents/Papers_and_Articles/2009_EP_Versatile_HWO.pdf","docCreatedDate":"2011-03-04T22:30:00.000-06:00","modifiedDate":"2011-03-04T22:30:00.000-06:00","docdate":"2011-03-04T22:30:00.000-06:00","languageSet":["English"],"accessType":"P","dataSearch":"brandgroups:Boots_&_Coots,|locations:Global,|prodgroups:Intervention:HWO,"},{"title":"Upgrades to CT Equipment Push Limits on Deep, Long Wells","description":"New CT packages deployed in various shale fields in the U.S. in 2013 demonstrated an average 50% reduction in rigup times.","path":"/content/dam/ps/public/bc/contents/Papers_and_Articles/2014_EQR_Harts.pdf","docCreatedDate":"2014-09-01T23:30:00.000-05:00","modifiedDate":"2014-10-28T23:30:00.000-05:00","docdate":"2014-09-01T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Reservoir_Challenges:Mature_Fields,|brandgroups:Boots_&_Coots,|locations:Global,|prodgroups:Intervention:Coiled_Tubing,Intervention,"},{"title":"2008, January, World Oil - Well Control and Intervention: Simultaneous Drilling and Snubbing Speed Completion and Production ","description":"A tight gas formation on the Pinedale Anticline and in North Jonah Field of west-central Wyoming was discovered in the 1960s, but economical development of the fields was not possible using conventional methods and tools. ","path":"/content/dam/ps/public/bc/contents/Papers_and_Articles/2008_WorldOil_Simultaneous_Drilling.pdf","docCreatedDate":"2011-03-04T22:30:00.000-06:00","modifiedDate":"2011-03-04T22:30:00.000-06:00","docdate":"2011-03-04T22:30:00.000-06:00","languageSet":["English"],"accessType":"P","dataSearch":"brandgroups:Boots_&_Coots,|locations:Global,|prodgroups:Intervention:HWO,"},{"title":"2014, First well interventions by a full-catenary CT system on a DP vessel with compensated gangway","description":"A stimulation vessel was used, in conjunction with some new concepts, to perform a successful offshore CT operation in the West Brunei Darussalam waterflooded oil field. The system provided numerous benefis, including enahnced safety, reduces rig up time and minimized spark potential. ","path":"/content/dam/ps/public/bc/contents/Papers_and_Articles/WO0114-Shell-Halliburton.pdf","docCreatedDate":"2014-01-27T22:30:00.000-06:00","modifiedDate":"2014-01-27T22:30:00.000-06:00","docdate":"2014-01-27T22:30:00.000-06:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,"},{"title":"Keeping a Lid on Leaks","description":"A two-step solution designed to locate and analyse well leaks and pipe corrosion","path":"/content/dam/ps/public/lp/contents/Papers_and_Articles/Web/KeepingaLidonLeaks.pdf","docCreatedDate":"2018-01-17T22:30:00.000-06:00","modifiedDate":"2018-02-19T22:30:00.000-06:00","docdate":"2018-01-17T22:30:00.000-06:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Wireline_and_Perforating:Cased_Hole_Logging:Pipe_Evaluation,Wireline_and_Perforating:Cased_Hole_Logging:Well_Integrity-Cased_Hole_Logging,"},{"title":"ICE Core Technologies in East Africa","description":"In East Africa, an offshore, dry gas reservoir proved that Halliburton\u2019s new\nICE Core technology could provide lab-quality analysis downhole","path":"/content/dam/ps/public/lp/contents/Papers_and_Articles/Web/Pipeline-ICECore.pdf","docCreatedDate":"2014-11-11T22:30:00.000-06:00","modifiedDate":"2014-11-11T22:30:00.000-06:00","docdate":"2014-11-11T22:30:00.000-06:00","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Production_Challenges:Unconventional_Resources,|locations:Global,|prodgroups:Wireline_and_Perforating:Open_Hole_Wireline:Formation_Evaluation-Open_Hole_Logging,Wireline_and_Perforating:Open_Hole_Wireline:Testing_&_Sampling-Logging,"},{"title":"ICE Bibliographies","description":"Bibliographies for ICE papers","path":"/content/dam/ps/public/lp/contents/Papers_and_Articles/Web/ICE-bibliographies.pdf","docCreatedDate":"2015-08-12T23:30:00.000-05:00","modifiedDate":"2018-06-25T23:30:00.000-05:00","docdate":"2015-08-12T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Wireline_and_Perforating:Open_Hole_Wireline:Testing_&_Sampling-Logging,Formation_Evaluation:Reservoir_Engineering-Formation_Evaluation:Downhole_Fluid_Identification,"},{"title":"Selected Halliburton DAS FiberVSP™ Presentations and Publications ","description":"Selected Halliburton DAS FiberVSP™ Presentations and Publications ","path":"/content/dam/ps/public/lp/contents/Papers_and_Articles/Web/das-fibervsp.pdf","docCreatedDate":"2018-12-27T13:22:00.000-06:00","modifiedDate":"2018-12-27T13:27:09.862-06:00","docdate":"2018-12-27T13:22:00.000-06:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Formation_Evaluation,Formation_Evaluation:Geophysics,Formation_Evaluation:Geophysics:Borehole_Seismic-Formation_Evaluation,"},{"title":"Laser Focus World ICE&#174; Core Article","description":"ICE&#174; Core article","path":"/content/dam/ps/public/lp/contents/Papers_and_Articles/Web/2014-LaserFocusWorld-Article-ICE.pdf","docCreatedDate":"2015-04-15T23:30:00.000-05:00","modifiedDate":"2015-04-15T23:30:00.000-05:00","docdate":"2015-04-15T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Wireline_and_Perforating:Open_Hole_Wireline:Testing_&_Sampling-Logging,"},{"title":"Seeing is Believing","description":"Ron Balliet, Halliburton Wireline & Perforating, USA, examines a new magnetic resonance based formation evaluation technology that is helping operators gain ever greater insight into their reservoirs.","path":"/content/dam/ps/public/lp/contents/Papers_and_Articles/Web/oilfield-technology-xmr.pdf","docCreatedDate":"2019-04-24T14:28:00.000-05:00","modifiedDate":"2019-04-24T15:32:03.755-04:00","docdate":"2019-04-24T14:28:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Formation_Evaluation,Formation_Evaluation:Petrophysics:Nuclear_Magnetic_Resonance-Formation_Evaluation,"},{"title":"Good Bugs Vs. Bad Bugs","description":"Control of micro-organisms during completion of hydraulically fractured wells is a significant component in successful development of a production system. Detrimental bacteria\u2014\u201cbad bugs\u201d\u2014such as sulfate-reducing bacteria (SRB) introduced into the reservoir during drilling or completion, can facilitate biogenic sulfide production, resulting in souring of production fluids and gas, iron sulfide formation and SRB-associated microbiologically influenced corrosion (MIC).","path":"/content/dam/ps/public/multichem/contents/Papers_and_Articles/web/Good-Bugs-Vs-Bad-Bugs-Feb-2015.pdf","docCreatedDate":"2015-08-03T23:30:00.000-05:00","modifiedDate":"2015-08-03T23:30:00.000-05:00","publishDate":"2018-10-02T11:21:20.447-05:00","docdate":"2015-08-03T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"brandgroups:Multichem,|locations:Global,"},{"title":"Flow Assurance: Chemical Inhibition of Gas Hydrates in Deepwater Production Systems","description":"One common and potentially detrimental\nflow assurance challenge to offshore production is formation of gas hydrates.\nHydrates can occur when light hydrocarbons and water are present at thermodynamically favorable pressure and temperature. In offshore production systems, they typically are seen in long flowlines, but also can appear anywhere in the system where gas and water are present under high pressure and low temperature.","path":"/content/dam/ps/public/multichem/contents/Papers_and_Articles/web/Hydrates-Article-Offshore-Mag-June2010.pdf","docCreatedDate":"2014-02-03T22:30:00.000-06:00","modifiedDate":"2014-02-03T22:30:00.000-06:00","publishDate":"2018-10-02T11:21:17.848-05:00","docdate":"2014-02-03T22:30:00.000-06:00","languageSet":["English"],"accessType":"P","dataSearch":"brandgroups:Multichem,|locations:Global,|prodgroups:Chemical_Services:Flow_Assurance-Multi-Chem,"},{"title":"Sulfide Stress Cracking - Practical Application to the Oil and Gas Industry","description":"The phenomenon of sulfide stress cracking (SSC) can result in catastrophic failures of pressurized equipment and piping, resulting in extensive damage, injuries and possible fatalities. This paper concentrates on, and identifies, the requirements for SSC to occur and gives designers and operators practical options for the prevention of SSC in equipment operating in an aqueous H<sub>2<\/sub>S environment.","path":"/content/dam/ps/public/multichem/contents/Papers_and_Articles/web/Sulfide-Stress-Cracking-SWPSC-2005.pdf","docCreatedDate":"2016-05-04T23:30:00.000-05:00","modifiedDate":"2016-05-04T23:30:00.000-05:00","docdate":"2016-05-04T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"brandgroups:Multichem,|locations:Global,|prodgroups:Chemical_Services:Midstream_Solutions,Chemical_Services:Integrity_Management,Chemical_Services:Corrosion_Issues,Chemical_Services:Off_Spec_Sales_Gas,Chemical_Services:Reservoir_Souring,Chemical_Services:H2S_Issues,Chemical_Services:Bacteria_Related_Issues:H2S_Scavengers,Chemical_Services:Bacteria_Related_Issues:Microbiological_Induced_Corrosion_(MIC),"},{"title":"Human Interaction: The Key to Automation","description":"When developing and implementing a specialty chemical automation system at a refinery or any other operation requiring water and process treatment, people and service need to be the cornerstones of the solution. The benefits of human interaction are far-reaching.","path":"/content/dam/ps/public/multichem/contents/Papers_and_Articles/web/Human-Interaction-Key-to-Automation-September-2018.pdf","docCreatedDate":"2018-09-17T09:57:00.000-05:00","modifiedDate":"2018-10-02T11:21:40.462-05:00","publishDate":"2018-10-02T11:21:25.239-05:00","docdate":"2018-09-17T09:57:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"brandgroups:Multichem,|locations:Global,"},{"title":"Production Chemical Applications: Using Analytical Data to Monitor and Optimize Chemical Treatments","description":"Advancing technology has enabled the oil and gas industry to analyze and track constituents in fluid samples. However, without proper sampling, appropriate laboratory procedures, and correct interpretations of such analyses, these data could be erroneous and result in costly and unnecessary actions. Through proper analytical sampling, testing, and understanding of these results, operators can monitor and optimize chemical applications.","path":"/content/dam/ps/public/multichem/contents/Papers_and_Articles/web/Production-Chemical-Applications-Using-Analytical-Data.pdf","docCreatedDate":"2018-02-19T22:30:00.000-06:00","modifiedDate":"2018-02-19T22:30:00.000-06:00","docdate":"2018-02-19T22:30:00.000-06:00","languageSet":["English"],"accessType":"P","dataSearch":"brandgroups:Multichem,|locations:Global,"},{"title":"Meeting the Hydrate Challenge - Expert Viewpoint","description":"Hydrate formation in flowlines is the number one concern for every subsea flow assurance engineer. As exploration moves into deeper and colder waters, the risk of hydrate formation becomes\nabsolutely critical. But what are the industry\u2019s latest techniques for managing the risk of hydrate formation? How well do they\nwork, and what can we expect in the future?","path":"/content/dam/ps/public/multichem/contents/Papers_and_Articles/web/Meeting-the-Hydrate-Challenge-Apr-2015.pdf","docCreatedDate":"2015-05-11T23:30:00.000-05:00","modifiedDate":"2015-05-11T23:30:00.000-05:00","publishDate":"2018-10-02T11:21:19.641-05:00","docdate":"2015-05-11T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"brandgroups:Multichem,|locations:Global,|prodgroups:Chemical_Services:Flow_Assurance-Multi-Chem,"},{"title":"Treatment Enables High-TDS Water Use as Base Fluid for Hydraulic Fracturing","description":"The beneficial use of produced water is receiving great attention in the oil and gas industry. As oil and gas are produced, large quantities of water containing high amounts of total dissolved solids TDS) are produced in the process.","path":"/content/dam/ps/public/multichem/contents/Papers_and_Articles/web/JPT-Jun-2013-Treatment-Enables-High-TDS-Water-Use.pdf","docCreatedDate":"2014-04-17T23:30:00.000-05:00","modifiedDate":"2014-04-17T23:30:00.000-05:00","docdate":"2014-04-17T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"brandgroups:Multichem,|locations:Global,"},{"title":"Microbial Solutions Treat Frac Water","description":"Because the water used in hydraulic fracturing operations typically is not potable, it is a common source of problematic bacteria such as sulfate-reducing bacteria (SRB) and acid-producing bacteria (APB). Controlling micro-organisms during the completion of hydraulically fractured wells is a significant component in the successful development of a production system.","path":"/content/dam/ps/public/multichem/contents/Papers_and_Articles/web/Microbial-Solutions-Treat-Frac-Water-Mar-2015.pdf","docCreatedDate":"2016-04-21T23:30:00.000-05:00","modifiedDate":"2016-04-21T23:30:00.000-05:00","publishDate":"2018-10-02T11:21:18.739-05:00","docdate":"2016-04-21T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"brandgroups:Multichem,|locations:Global,"},{"title":"Water Technology: Understanding, Interpreting and Utilizing Water Analysis Data","description":"The significance and importance of water to the oil and gas industry cannot be overstated. While water is often an unwanted by-product of production, water is utilized in many production scenarios and is often times the primary driver for the production of oil. This paper discusses the importance of an accurate water analysis and will discuss the practical uses of this information.","path":"/content/dam/ps/public/multichem/contents/Papers_and_Articles/web/Water-Technology-SWPSC-2008.pdf","docCreatedDate":"2016-05-04T23:30:00.000-05:00","modifiedDate":"2016-05-04T23:30:00.000-05:00","docdate":"2016-05-04T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"brandgroups:Multichem,|locations:Global,|prodgroups:Chemical_Services:Flow_Assurance-Multi-Chem,Chemical_Services:Corrosion_Issues,Chemical_Services:Scale_Deposits,Chemical_Services:Source_Water-Water_Re-use,Chemical_Services:Water_Quality_Issues,Chemical_Services:High_Failure_Rates,Chemical_Services:Flowline_Issues:Scale_Inhibitors,Chemical_Services:Mineral_Deposits,"},{"title":"World Pipelines - April 2018 - \"Victorious Vessels\"","description":"Halliburton was awarded a contract for the dewatering, conditioning, nitrogen purging, and monoethylene glycol (MEG) gel pumping activities for the pipeline precommissioning following extensive technical and commercial discussions for several project execution options that had the support of the pipeline and process services global team from the UK and the Netherlands.","path":"/content/dam/ps/public/pps/contents/Papers_and_Articles/web/World-Pipelines-April-2018-Victorious-Vessels.pdf","docCreatedDate":"2018-04-25T23:30:00.000-05:00","modifiedDate":"2018-04-25T23:30:00.000-05:00","docdate":"2018-04-25T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:South_America:Brazil_Eastern_South_America,|prodgroups:Pipeline_and_Process_Services:Pipeline_Maintenance_Services:Pipeline_Precommissioning_&_Commissioning,Pipeline_and_Process_Services:Nitrogen_Services,Pipeline_and_Process_Services:Pipeline_Precommissioning_Services,"},{"title":"Fiber Optics Sensors Creating New Possibilities for Optimizing Fracturing","description":"Fiber optics sensing tools move from aerospace research to open new frontiers in fracturing.","path":"/content/dam/ps/public/pinnacle/contents/Papers_and_Articles/web/AOG-fiber-optics.pdf","docCreatedDate":"2013-07-01T23:30:00.000-05:00","modifiedDate":"2015-11-18T22:30:00.000-06:00","publishDate":"2018-10-02T11:25:29.294-05:00","docdate":"2013-07-01T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"brandgroups:Pinnacle_Technologies,|locations:Global,|prodgroups:Reservoir_&_Fracture_Monitoring:Fiber_Optic_Monitoring-Pinnacle:Distributed_Fiber_Optic_Services,"},{"title":"Data Gathering to Smooth the Bumpy Path to Optimization","description":"Noble Energy's \u201cUnderground Laboratory\u201d includes fiber-optic and pressure sensors to understand ways to maximize production and profits.","path":"/content/dam/ps/public/pinnacle/contents/Papers_and_Articles/web/2014-april-jpt-holley.pdf","docCreatedDate":"2014-04-01T23:30:00.000-05:00","modifiedDate":"2015-11-18T22:30:00.000-06:00","publishDate":"2018-10-02T11:25:30.487-05:00","docdate":"2014-04-01T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"brandgroups:Pinnacle_Technologies,|locations:Global,|prodgroups:Reservoir_&_Fracture_Monitoring:Fiber_Optic_Monitoring-Pinnacle:Distributed_Fiber_Optic_Services,"},{"title":"Sensor suite illuminates downhole fracture development, production efficiency","description":"PRODUCERS HAVE A\nNEW TECHNOLOGY ALLY, OR PERHAPS\nmore accurately a super team of high-tech support that delivers\nvaluable information for better completion designs,\nwell and fracture spacing, and ultimately improved well performance:\nPinnacle\u2019s integrated sensor diagnostics (ISD).","path":"/content/dam/ps/public/pinnacle/contents/Papers_and_Articles/web/NTM-following-the-frac-isd.pdf","docCreatedDate":"2015-08-12T23:30:00.000-05:00","modifiedDate":"2015-08-11T23:30:00.000-05:00","publishDate":"2018-10-02T11:25:26.745-05:00","docdate":"2015-08-12T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Reservoir_&_Fracture_Monitoring,"},{"title":"Following the Frac","description":"Sensor suite illuminate downhole fracture development and production efficiency.","path":"/content/dam/ps/public/pinnacle/contents/Papers_and_Articles/web/following-the-frac.pdf","docCreatedDate":"2015-07-01T23:30:00.000-05:00","modifiedDate":"2015-11-18T22:30:00.000-06:00","publishDate":"2018-10-02T11:25:30.487-05:00","docdate":"2015-07-01T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"brandgroups:Pinnacle_Technologies,|locations:Global,|prodgroups:Reservoir_&_Fracture_Monitoring:Fiber_Optic_Monitoring-Pinnacle:Distributed_Fiber_Optic_Services,"},{"title":"Stress Shadowing and Fracture Interference in GOHFER®","description":"During hydraulic fracture treatment operations of horizontal wells, one important consideration is the subsequent spacing of multiple transverse fractures. ","path":"/content/dam/ps/public/pinnacle/contents/Papers_and_Articles/web/gohfer-stress-shadowing-fracture-interference.pdf","docCreatedDate":"2015-05-15T09:10:00.000-05:00","modifiedDate":"2019-02-20T10:12:18.095-05:00","docdate":"2015-05-15T09:10:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Reservoir_&_Fracture_Monitoring:Fracture_Engineering,"},{"title":"Fiber-Optic Sensing: Turning the Lights on Downhole","description":"By packing a wide variety of sensors into a single fiber cable, simple package, multiple conventional monitoring systems can be replaced while reducing complexity and cost.","path":"/content/dam/ps/public/pinnacle/contents/Papers_and_Articles/web/hart-energy-fiber-optics.pdf","docCreatedDate":"2015-11-18T22:30:00.000-06:00","modifiedDate":"2015-11-18T22:30:00.000-06:00","publishDate":"2018-10-02T11:25:28.017-05:00","docdate":"2015-11-18T22:30:00.000-06:00","languageSet":["English"],"accessType":"P","dataSearch":"brandgroups:Pinnacle_Technologies,|locations:Global,|prodgroups:Reservoir_&_Fracture_Monitoring:Fiber_Optic_Monitoring-Pinnacle:Distributed_Fiber_Optic_Services,"},{"title":"Microseismic Source Mechanisms Must Be Understood Before Results Can be Accurately Interpreted","description":"Microseismicmapping has proved to be a\nvaluable technology for monitoring\nhydraulic fractures and other reservoir\nprocesses.","path":"/content/dam/ps/public/pinnacle/contents/Papers_and_Articles/web/H08269.pdf","docCreatedDate":"2011-05-05T23:30:00.000-05:00","modifiedDate":"2011-05-05T23:30:00.000-05:00","docdate":"2011-05-05T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"brandgroups:Pinnacle_Technologies,|locations:Global,|prodgroups:Stimulation:Fracturing,Stimulation,Stimulation:Fracturing:Treatment_Design_&_Monitoring-Fracturing,Stimulation:Fracture_Mapping,Reservoir_&_Fracture_Monitoring:Microseismic_Monitoring,"},{"title":"Integrating Microseismic, Fracture Diagnostics Data Improves Stimulation Analysis","description":"Microseismic is an indispensable technology that provides critical information on hydraulic fracturing parameters, but it cannot provide all the precise information to enable a full understanding of stimulation behavior in unconventional reservoirs. Obtaining a complete picture of the fracturing process requires integrating microseismic with advanced diagnostic solutions such as surface tiltmeters, downhole tiltmeters, and fiber optic distributed temperature and acoustic sensing, as well as more conventional diagnostic tools, including tracers, flow tests, fracture modeling, diagnostic injection tests, and production data analysis.","path":"/content/dam/ps/public/pinnacle/contents/Papers_and_Articles/web/IntegratingMicroseismicAOGR-Dec2014.pdf","docCreatedDate":"2015-01-21T22:30:00.000-06:00","modifiedDate":"2015-01-21T22:30:00.000-06:00","docdate":"2015-01-21T22:30:00.000-06:00","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Production_Challenges:Production_Optimization,Reservoir_Challenges:Improve_Reservoir_Drainage,Reservoir_Challenges:Improve_Reservoir_Productivity,Reservoir_Challenges:Mature_Fields,|brandgroups:Pinnacle_Technologies,|locations:Global,|prodgroups:Reservoir_&_Fracture_Monitoring:Integrated_Sensor_Diagnostics-ISD,Reservoir_&_Fracture_Monitoring:Fiber_Optic_Monitoring-Pinnacle:Distributed_Fiber_Optic_Services,"},{"title":"Diagnostics Reveal Stimulation Effects","description":"Diagnostics Reveal Stimulation Effects American Oil and Gas Reporter July 2018 Edition","path":"/content/dam/ps/public/pinnacle/contents/Papers_and_Articles/web/Diagnostics-Reveal-Stimulation-Effects-AOGR-July-2018.pdf","docCreatedDate":"2018-07-01T23:30:00.000-05:00","modifiedDate":"2018-07-26T23:30:00.000-05:00","docdate":"2018-07-01T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"brandgroups:Pinnacle_Technologies,|locations:Global,|prodgroups:Reservoir_&_Fracture_Monitoring:Integrated_Sensor_Diagnostics-ISD,"},{"title":"DAS Technology Expands Fiber Optic Applications for Oil, Gas Industry","description":"The digitization and automation of oil and gas technology and growing need for efficiency, productivity and safety in operations offers more opportunities for the use of fiber optics in oil and gas.","path":"/content/dam/ps/public/pinnacle/contents/Papers_and_Articles/web/das-article-rigzone.pdf","docCreatedDate":"2015-05-04T23:30:00.000-05:00","modifiedDate":"2015-05-13T23:30:00.000-05:00","docdate":"2015-05-04T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"brandgroups:Pinnacle_Technologies,|locations:Global,"},{"title":"Fracture Conductivity and Cleanup in GOHFER®","description":"There has been considerable interest in, as well as requests for additional information and clarification on, the representation of fracture conductivity and cleanup within GOHFER. ","path":"/content/dam/ps/public/pinnacle/contents/Papers_and_Articles/web/gohfer-fracture-conductivity-cleanup.pdf","docCreatedDate":"2016-04-16T09:05:00.000-05:00","modifiedDate":"2019-02-20T10:08:58.997-05:00","docdate":"2016-04-16T09:05:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Reservoir_&_Fracture_Monitoring:Fracture_Engineering,"}]}]