SupaVac™ SV400 Cuttings Collection and Pumping System

Simple and safe bulk transfer of drill cuttings and other oilfield wastes

SupaVac SV400The transfer of cuttings from an offshore/onshore location is automated with the SupaVac 400 cuttings collection and pumping system. The system pneumatically conveys materials such as drill cuttings, tank bottoms, heavy crude sludge and sand slurries to any location on the rig site, or to Halliburton's Honey Comb Bottom™ tanks on a boat for ship to shore transfer. It is applicable for all types of contaminated cuttings, both wet and dry.

Intrinsically Safe

This robust system is designed to operate in hazardous locations, safely collecting and pumping materials. Because it is air-operated, the SupaVac 400 is intrinsically safe, significantly reducing risk at the rigsite. Cuttings move through the system entirely enclosed, eliminating the risk of spills and ensuring minimal NPT.

Easily installed on any rig location, offshore or onshore

SupaVac SV400 unit is the most compact and versatile air-operated vacuum/blower unit in the oil industry. The unit is highly portable and can be installed anywhere on the rig without modifications. To introduce feed the unit can operate on suction mode or be gravity fed like traditional vacuum blowers.

SupaVac™ SV400 Cuttings Collection and Pumping System

Filter By  
Количество записей на странице Show     results per page
  TitleНазвание  DateДата
Summary Summary Venezuela: Halliburton's SupaVac SV400 Pumping System Helped Clean Mud Pits 65% Faster, Saving US$ 6.3 MM of Rig Time
The challenge was to provide a waste management solution that would accelerate the cleaning operation and significantly reduce downtime.
Summary Summary SupaVac™ SV400 Pumping System - Sales Data Sheet
The SupaVac SV400 unit is a compact, air-operated, vacuum recovery and pressure discharge pump. The robust system is designed to operate in hazardous locations, safely collecting and pumping materials such as drill cuttings, tank bottoms, heavy crude sludge and sand slurries.
Summary Summary SupaVac™ SV60 Portable Cuttings and Fluid Transfer Unit - Sales Data Sheet
The SupaVac SV60 Portable Cuttings and Fluid Transfer Unit operates as a shuttle system that alternately discharges then loads a wide range of material, ranging from liquids to heavy slurries to nearly dry cuttings and drilling waste.
Summary Summary Customized NAF, Optimized Solids Control, and STOPPIT® LCM Help Save over USD 1 Million in One Year
Provide effective cure for severe losses in large fractures
Summary Summary Effective Offshore Waste Treatment Reduces Disposal Costs by USD $808,000
Baroid Solution greatly reduces onshore disposal costs
Summary Summary Baroid Slurry Handling System Provides Cost-Effective Waste Disposal Solution
System enables operator to achieve zero discharge while drilling in environmentally sensitive area
Summary Summary BaraSolve™ Services and BaraStream™ Solutions Save Rig Time and Cost
Halliburton was awarded key offshore and onshore waste management contracts for BP’s drilling campaign in Egypt. For offshore, the customer contracted a drillship with a screw conveyor as the primary, and only, means of transporting cuttings from the shakers to a zero-discharge cuttings handling system.
Summary Summary SupaVac™ SV400 Cuttings Collection and Pumping System
Designed for the simple and safe bulk transfer of drill cuttings and other oilfield wastes.
Summary Summary BaraStream™ SV60 Portable Cuttings and Fluid Transfer Unit
The SupaVac™ SV60 portable cuttings and fluid transfer unit operates as a shuttle system that alternately discharges then loads a wide range of material, ranging from liquids to heavy slurries to nearly dry cuttings and drilling waste.
Related Information

Related Information Дополнительная информация