STOPPIT® Lost Circulation Material

Can cure a wide range of fluid loss at an economical price

STOPPIT® lost circulation material is designed to mitigate partial to severe fluid loss and is effective in aqueous and non-aqueous based fluids and systems.  It is uniquely formulated with products common in the industry to remain cost effective and is pumped as a “pill” treatment, requiring no trips, special pumps, or spacers.  A pill of STOPPIT lost circulation material (LCM) can be pumped through typical drill strings and used downhole via sweep, pump & soak or hesitation squeeze applications.

Engineered for increased material “toughness”

STOPPIT is an “Engineered, Composite Solution" with a unique formulation that isolates the tip of the fracture.  In addition, its composition has been designed to impart an increased “toughness” to the resulting seal.  This allows for exceptional fracture plugging and the ability to resist common downhole changes in pressure such as swab/surge or wellbore breathing, helping ensure the fracture remains sealed.

Using STOPPIT LCM provides superior sealing and a solution to wide range of lost circulation scenarios, helping reduce nonproductive time and saving money.

*STOPPIT® LCM was previously referred to as BDF-551.

Filter By  
Количество записей на странице Show     results per page
  TitleНазвание  DateДата
Summary Summary STOPPIT® Hoja De Datos Técnicos
STOPPIT® Hoja De Datos Técnicos
Summary Summary STOPPIT® Lost Circulation Material - Product Data Sheet
STOPPIT LCM may be used as a stand alone treatment or as a supplement to other lost circulation treatments.
Summary Summary BaraBlend®-665 and BaraLock®-666 LCM Pills Stop Severe Losses in Highly Fractured Formation
An operator in Pakistan’s Kadanwari field experienced severe downhole losses in the highly fractured Sui Main limestone formation. Offset well records in the Kadanwari field showed similar lost circulation incidents
Summary Summary STOPPIT® LCM Standard Field Application Procedure
Standard Field Application Procedure
Summary Summary Lost Circulation Flyer
Lost Circulation Flyer
Summary Summary STOPPIT® Engineered, One Sack Lost Circulation Material - Sales Data Sheet
STOPPIT® lost circulation material is a particulate-based, “engineered, one-sack” solution that is designed to mitigate partial to severe drilling fluid loss rates.
Summary Summary US Texas: STOPPIT® LCM enables recovery from total losses
After landing the curve at 90° in an 8 ¾-inch Granite Wash well, the operator experienced complete lost returns. An 8.1 lb/gal INVERMUL™ invert emulsion system was being used while drilling with a 6 ½-inch turbine assembly down hole.
Summary Summary STOPPIT® and BARACARB® LCM Blends Significantly Reduce Fluid Costs and Rig Time
The operator was having problems with severe lost circulation in the area. On a previous well, 1,033 bbl of oil-based fluid was lost, amounting to a total well cost of more than $380,000. As an added challenge, there was a previous recommendation of 18 lb/bbl of LCM that could be added to the drilling fluid due to the tool restrictions in the drill string.
Summary Summary US Oklahoma: STOPPIT® LCM stops oil-based fluid losses in horizontal wellbore
An operator in the Cana Field was in the process of drilling a well with a projected MD of 18,086 feet – including a 7,500-ft lateral – which was their longest lateral to date in the field. A bit trip was made in the lateral with a 13.1 lb/gal INVERMUL diesel based system at a MD of 12,204 feet and a TVD of 10,714 feet. Once on bottom, severe lost circulation was encountered.
Summary Summary Halliburton Solution Improves Cement Isolation, Saving Significant Costs Per Well
WPX Energy was experiencing low, ratty cement tops and subpar cement isolation, which had become an issue with state regulators. They were also encountering increased non-productive time (NPT) with lost circulation in several wells. Cement bond logs indicated poor isolation in many wells, so additional state permits were required before the wells could be completed.
Summary Summary Qatar: STOPPIT® Lost Circulation Material Enables Customer to Regain Circulation after Total Losses
Due to previous success with STOPPIT® Lost Circulation Material (LCM) in other areas, Baroid introduced STOPPIT LCM into the planning phase and the drilling program for the current well.
Summary Summary STOPPIT® LCM Pills Cure Loss Rate for Oman Operator
STOPPIT® LCM Pills Cure Severe Losses, Eliminating Need for Cement Plug
Summary Summary Customized NAF, Optimized Solids Control, and STOPPIT® LCM Help Save over USD 1 Million in One Year
Provide effective cure for severe losses in large fractures
Summary Summary Casing Set Successfully at Planned Depth After Engineered LCM Pills Cure Total Losses
Casing Set Successfully at Planned Depth After Engineered LCM Pills Cure Total Losses
Summary Summary Combo LCM pills save operator US$50,000 and prevent hole collapse
Pills built with STOPPIT® and HYDRO-PLUG® lost circulation materials can cure total losses and prevent wellbore collapse
Summary Summary Iraq: STOPPIT®-BAROFIBRE® LCM Sweeps Eliminate Severe Losses, NPT in Carbonate Formations
Pumping a STOPPIT®-BAROFIBRE® LCM sweep every 1–2 stands provided the multi-modal, variable-size solution for sealing and bridging the loss zones while drilling.
Summary Summary Customized LCM Squeeze Pill Cures Losses in Depleted Sandstones and Eliminates Additional Trips
STOPPIT® LCM enables exceptional fracture plugging, saving operator time and money.
Summary Summary STOPPIT® LCM in High-Vis Pills Helps Prevent Losses in Vugular Formation, Saves $50K in Rig Time
An operator in the vugular UER formation needed a proactive solution that would prevent or minimize losses while drilling a 16-inch hole.
Summary Summary STOPPIT® Lost Circulation Material
STOPPIT® LCM is an engineered, composite solution consisting of specific materials with a precise particle size distribution, optimized for superior sealing performance in most zones with moderate to severe losses.
Related Information

Related Information Дополнительная информация