Selective and no-go nipple profiles and lock systems for standard and heavy weight tubingTalk to an expert
Halliburton subsurface flow control systems are designed to simplify completion programs and help maintain production control for the life of the well. Every lock mandrel can be functionally tested by installing into a nipple profile.
Selective by running tool industry-standard flow controls
No-go landing nipples designed for use in standard and heavyweight tubing.
Landing nipple and lock mandrel systems well-suited for high-pressure, high-volume large bore completions.
V0-qualified, high-pressure plugs designed for use in extreme temperature and pressure environments
The SRP plug system is designed primarily for use in horizontal subsea trees
Designed for use in extreme temperature and pressure environments
SRH high-pressure plugs are designed for use in extreme temperature and pressure environments. The top no-go plug is designed such that pressure from above and below is held by key/nipple engagement. Special non-elastomer V-packing stacks are gas-tight qualified up to 25,000 psi at 450°F.
X® and R® landing nipples and lock mandrels
Halliburton Otis X® and R® landing nipples are selective by running tool and are run in the well on the completion tubing to provide a specific landing location for subsurface flow control equipment. These landing nipples feature common internal profiles. Otis X landing nipples are designed for use in standard weight tubing and R landing nipples are typically used with heavyweight tubing.XN® and RN® landing nipples and lock mandrels.
Otis® XN® and RN® no-go landing nipples are designed for use in single nipple installations or as the bottom nipple in a series of Otis X® or R® landing nipples. These landing nipples have the same packing bore ID for a particular tubing size and weight. Otis XN landing nipples are designed for use with standard weight tubing and RN landing nipples are used with heavyweight tubing.
Top no-go type RPT® landing nipples and lock mandrels
The Halliburton Otis® RPT® no-go landing nipple system provides a means of running a series of positive location landing nipples in a tubing string with minimum restriction. Otis RPT no-go landing nipples are designed to accept Otis RPT and RPTS lock mandrels.
SRP wellhead profile and plug
The Halliburton SRP plug system is designed primarily for use in horizontal subsea trees. Its compact size allows the tree to be shorter, which allows for smaller, less costly wellhead equipment. SRP wellhead backpressure valves provide pump-in well-kill capability, while providing complete well control. The valve features the same compact design and multiple seal backup available in the SRP wellhead plug.
Maintain production control for the life of your well
Ready to take the next step?