Fracturing

 

Halliburton’s history of fracturing achievement is due to continuous devotion to technology development, extensive training and a global best practices process. Since Halliburton performed the first commercial fracturing treatment in 1949, over 1 million wells have been successfully fractured by the industry in the United States.

ConductorSM Fracturing Service
The ultimate goal of well stimulation is to get higher production out of an asset.
Transcend™ Permeability Enhancers
The Transcend™ Permeability Enhancer portfolio is Halliburton’s premiere offering for flow enhancing technology.
RockPerm™ Service
RockPerm™ service is a laboratory testing process performed by specially trained technicians in local area labs.
EZ-Stim Service
Helps Improve Efficiency of Hybrid Fracturing Treatments and Stimulating Long Horizontals
AccessFrac® Stimulation Service
AccessFrac stimulation service is Halliburton’s process to optimize proppant distribution for improved long-term production performance.
MicroScout® Service
Creating complexity in unconventionals reservoirs during the fracturing treatment is only the first step to realizing the reservoir’s full potential.
Prodigi™ AB Intelligent Fracturing Service
In unconventional fracturing design, there are many parameters used to optimize stimulation treatment outcomes.

Fracturing

Filter By  
Количество записей на странице Show     results per page
  TitleНазвание  DateДата
Summary Summary SCA-130™ Sulfide-Cracking Inhibitor
Liquid additive for acid systems helps prevent sulfide cracking and enables sulfide scavenging
Summary Summary IntelliScan™ Equipment Monitoring System
The Halliburton IntelliScan™ equipment monitoring system enables early-time detection for maintenance needed of high-pressure pumping equipment.
Summary Summary DCA™ -21004 Frac Diverter Agent - Far Field Fracture Network
DCA&#153-21004 agent helps improve fluid and proppant placement by enabling redirection of treatment placement within the fracture network by sealing on proppant or fracture throats to help redistribute fluid and proppant flow within the fracture network.
Summary Summary DCA™ -21003 Frac Diverter Agent - Near Wellbore
DCA™ -21003 agent is a disclosable fracturing diverter agent for use in AccessFrac service applications where disclosure of fluid component material composition is required. DCA-21003 agent helps improve fluid and proppant placement across a treatment interval with multiple perforation clusters.
Summary Summary Q10™ XLE Pumping Unit
Q10™ XLE Pumping Unit Low noise, low emissions, high pressure pumping units
Summary Summary ExpressSand Delivery System
ExpressSand delivery system - efficient proppant management
Summary Summary DFS-CWG™ Fracturing Fluid System
DFS-CWG™ fracturing fluid system uses a new fracturing fluid formulation made with ingredients sourced from the food industry.*
Summary Summary SandWedge® Conductivity Enhancement Service
Enhances Proppant Pack Conductivity for Improved Long-Term Production. Now available in Lite, Plus, and Max Systems Tailored to Treatment Requirements
Summary Summary Halliburton Vessel-based Modular Solution (VMS) - A4
Flexible Stimulation System Designed to Meet Offshore North Sea Requirements
Summary Summary Twin Panther Pump Trailer
Twin Panther Pump Trailer
Summary Summary ConductorSM Fracturing Service
Advanced Pillar Fracturing Technology Provides Improved Long-Term Production from Specially Selected Formations
Summary Summary HT-2000 Pump Trailer
HT-2000 Pump Trailer
Summary Summary HQ-2000 Pump Trailer
HQ-2000 Pump Trailer
Summary Summary My-T-Oil IV Fluid
Continuously Mixed Gelled Oil System
Summary Summary FR-76™ Friction Reducer Agent
FR-76™ liquid friction reducer is designed to be used in fresh water and low TDS (total dissolved solids) brines.
Summary Summary HT-2000 Pump Trailer
HT-2000 Pump Trailer
Summary Summary Halliburton Vessel-based Modular Solution (VMS)
Flexible Stimulation System Designed to Meet Offshore North Sea Requirements
Summary Summary WG-22™ gelling agent
WG-22™ gelling agent is a powdered, “one-bag” blend of a high-viscosity, rapidly gelling, intermediate-residue guar gum mixed with a nonionic surfactant, a free-flow agent, and a suspending agent.
Summary Summary WLC-7™ fluid-loss additive
WLC-7™ is a fluid-loss additive designed specifically for use with fracturing fluids. It is an organic solid ground into a fine powder.
Summary Summary MatrixFlo II™ breaker
MatrixFlo II™ breaker is a liquid, delayed release acid breaker that deeply penetrates a formation to provide a more complete break and enhanced fluid conductivity.
Summary Summary TB-41™ crosslinker
TB-41™ crosslinker is a white, powdered crosslinking agent.
Summary Summary HYG-3™ buffer
HYG-3™ buffer is a weak acid that helps control the pH of fracturing fluids.
Summary Summary Oxol II™ oxidant
Oxol II™ is a solid oxidant that helps remove polymer buildup from injection and production wells. Oxol II oxidant is also the breaker of choice in Flo-Pac™ fluid for gravel-packing operations.
Summary Summary MO-75™ gelling agent
MO-75™ gelling agent is used in the My-T-Oil IV™ system, a gelled-oil system that can be mixed continuously.
Summary Summary WG-11™ guar gelling agent
WG-11™ is a chemically modified, low-residue guar gelling agent used in aqueous fracturing fluids.
Summary Summary BE-3 Biocide
Bacteria degradation can quickly reduce the viscosity of high-viscosity gels stored in tanks during warm or hot weather.
Summary Summary BC-200™ crosslinker
BC-200™ crosslinker is a hydrocarbon-based slurry that is used as the crosslinker/buffer component in Delta Frac® 200 fluids.
Summary Summary SandWedge® conductivity enhancement system
The SandWedge® conductivity enhancement system helps enhance fracture conductivity resulting from water-based fluid treatments.
Summary Summary ViCon NF™ high-temperature breaker
ViCon NF™ high-temperature breaker is used with Gel-Sta™ stabilizer in fracturing fluids.
Summary Summary WLC-4™ particulate fluid-loss additive
WLC-4™ particulate fluid-loss additive is designed for water-based, gelled fracturing fluids. This additive can also be used with 100-mesh sand to help control leakoff in natural fractures.
Summary Summary MA-100D™
MA-100D™ gelling agent is a temperature dependent polymer used in high-temperature (160° to 225°F) Matrol™ 3+ service formulations.
Summary Summary TB-101™
TB-101™ agent is the initial and secondary gelling agent used in the Temblok 100™ system.
Summary Summary LoSurf-2000S™ Surfactant
LoSurf-2000S™ surfactant is a solid, powder surfactant. It is a blend of anionic nonemulsifier and an anionic hydrotrope. LoSurf-2000S surfactant can be used as a surface-tension reducer and nonemulsifier in fracturing and acidizing applications.
Summary Summary OptiFlo-LT™ acid additive
OptiFlo-LT™ is a delayed-release acid additive that helps decrease the pH of fracturing fluids.
Summary Summary WG-31™ gelling agent
WG-31™ gelling agent is a powdered, “one-bag” blend of high-viscosity, rapid-yielding, intermediate-residue guar gum mixed with a nonionic surfactant and a suspending agent.
Summary Summary K-42™ Crosslinker
K-42™powdered organic crosslinker is an essential component of the low-temperature formulation of PermSeal™ 600 conformance service.
Summary Summary CL-24™ crosslinker
CL-24™ crosslinker is the crosslinking agent in the Thermagel™ fluid crosslinked gel system. This fluid system was developed to treat wells with bottomhole temperatures (BHTs) greater than 300°F (149°C).
Summary Summary GS-5™ additive
GS-5™ additive is the viscosifying component of LGC-V™ and LGC-VI™ liquid gel concentrates.
Summary Summary MO-66™ crosslinker
MO-66™ crosslinker is one of two activators in the My-T-Oil III™ fluid system. The My-T-Oil III system is a batch-mixable, oil-based fluid that can enhance fracturestimulation results when used in a well.
Summary Summary HPH Breaker™ enzyme breaker solution
HPH Breaker™ is an enzyme breaker solution that maintains effective activity at higher pH levels than conventional enzyme breakers.
Summary Summary GBW-3™
GBW-3™ is a low-temperature breaker most commonly used in the Waterfrac process.
Summary Summary MA-300™ Polymer
MA-300™ polymer is a white, solid powder used as a range extender and/or gelling agent in conformance applications such as Matrol™ Plus HT services.
Summary Summary GS-6™
GS-6™ additive suspends guar in LGC-8™ liquid gel concentrate.
Summary Summary WG-17 LXP™ Free-Water Control Agent
WG-17 LXP agent helps prevent solids from settling and helps control free water. It can also be used for mildly retarding cement slurries and increasing slurry viscosity.
Summary Summary Activator IT™ Activator
Activator IT™ activator is used in INJECTROL® IT service, an internally catalyzed silicate system that achieves depth-of-matrix penetration for helping control water flow during drilling, completion, production, and injection operations.
Summary Summary CL-30™ crosslinker
CL-30™ crosslinker is a metal oxide crosslinker used in the K-MAX-PlusSM service, Max-Seal™ service, and Z-MAX™ service. CL-30 crosslinker causes the WG-33™ gelling agent to crosslink by raising the pH of the solution.
Summary Summary WLC-6
WLC-6 fluid-loss additive helps reduce gel filter cakes. It is ground to a particle size appropriate for fracturing operations.
Summary Summary SurgiFracSM Service Used to Stimulate Open-Hole Lateral Adds More Than $927;000 in Value in Just Six Months (New Mexico)
A 2;000-ft open-hole lateral had been drilled in a 4;600-ft Yeso formation well�in a mature�field that the operator believed was depleted. After the lateral was cleaned out and an acid wash hadbeen performed; the well still failed to produce oil. To revive the well; the operator asked Halliburton for an effective method to stimulate the entire lateral and connect it to the formation's natural fracture system.
Summary Summary Carrizo Oil and Gas Improve Well Performance in Multi-Well AccessFrac® Service Field Study
Carrizo Oil and Gas used AccessFrac® stimulation service on a large-scale field trial in the Eagle Ford shale play in an effort to increase the number of effectively stimulated perforation clusters and to improve well performance. Results have shown the wells utilizing the AccessFrac service maintain higher flowing pressures indicating an increase in stimulated reservoir volume.
Summary Summary AccessFrac® Stimulation Service Improves Cluster Efficiency Without Quantifying Stresses
The limited availability of diagnostic data for multiple wells in Oklahoma hindered the operators’ ability to effectively design a limited-entry perforating scheme, along with stimulation treatments. AccessFrac® stimulation service was deployed in an attempt to improve cluster efficiency and ultimate recovery from the wells. Wells utilizing AccessFrac service showed initial production rates 2.7 to 3.2 times higher than comparable offsets.
Summary Summary RockPerm Permian Basin Case Study
Custom Chemistry Improves Well Performance: RockPerm™ Service Enables Customized Fracturing Fluid Solution Delaware Basin, Texas
Summary Summary CobraMax DM Service Case History: East Texas
A Low Risk and Efficient Operation Maximizing Stimulated Reservoir Volume in the Austin Chalk
Summary Summary MicroScout® Service Enhances Well Production in Woodford Shale Play
MicroScout Service improves production rates by 10-15 percent
Summary Summary The American Oil & Gas Reporter - Refracturing Extends Lives of Unconventional Reservoirs
The ability to refracture source rock reservoirs has the potential to extend the life of the “shale revolution” beyond the normal 20-30 year productive life of a reservoir. It is considered the best option for combatting the more rapid decline rates of unconventional reservoirs.
Summary Summary Solvent-free consolidation system controls proppant flowback
An aqueous-based consolidation system aids in maintaining production rates in fracture-stimulated wells.
Summary Summary Delivering operational, financial benefits to Permian stimulation projects
Integrated bacterial control solutions extend the health of wells
Summary Summary Unconventional Wisdom Oilfield Technology March 2013
Oilfield Technology Magazine, March 2013 Article explains how unconventional fracturing can be understood through statistically matching fracture networks to microseismic data
Summary Summary Halliburton Introduces AccessFracSM Service
HOUSTON – Oct. 31, 2011 – Halliburton (NYSE: HAL) is combining unique diversion technologies and pumping capabilities to create a process that helps enable operators achieve better long-term production from shale formations, thereby maximizing asset development.
Summary Summary Halliburton Introduces Revolutionary Vertical Proppant Storage System
SandCastle™ PS-2500 proppant storage silo enables using a smaller pad size for fracturing operations and enhances environmental performance.
Summary Summary Halliburton’s SandCastle® Storage Unit Technology Wins Meritorious Award For Engineering Innovation
HOUSTON – May 6, 2013 – Halliburton’s (NYSE: HAL) SandCastle® PS-2500 vertical proppant storage bin was awarded E&P magazine’s Meritorious Award for Engineering Innovation at the Offshore Technology Conference today.
Summary Summary Halliburton’s New Fracturing Service Helps Increase Production for Magnum Hunter Resources in Eagle Ford Shale Formation
HOUSTON – (Sept. 13, 2012) – Halliburton announced today the commercialization of its new PermStimSM fracturing service.
Summary Summary PermStim service case study in the Eagle Ford
PermStim™ fracturing fluid system helps Magnum Hunter Resources increase production in the Eagle Ford Shale
Summary Summary Wells with OilPerm™ surfactants and formation fluid mobility modifiers (FMMs) performed 300% better than similar wells on 30-day cumulative oil production
How custom chemistry increases production over the life of wells
Summary Summary Proprietary diversion technique succeeds in difficult non-cemented lateral
Halliburton’s AccessFrac® Service overcomes non-cemented lateral environment to accomplish diversion, provide stimulation, and deliver superior production.
Summary Summary CobraMax HJA Service
Depiction of CobraMax HJA and how the tool operates
Summary Summary SandCastle video
video of PS 2500 vertical sand storage bin transitioning from horizontal to vertical
Summary Summary Clay/Mineralogy (Multimedia)
StiMRIL services uses MRIL magnetic resonance imaging logging technology to determine which zones have clays present and which are clay free. This determines the type of completion fluid that should be selected to optimize production and reduce clay swelling.
Summary Summary MicroScout® Service and MicroScout® Plus Service
The Halliburton MicroScout® service is the first to provide a means of extended stimulation of unconventional reservoir microfractures for increased recovery of hydrocarbons. For even further stimulation, the MicroScout Plus service provides deeper penetration into the formation for increased conductive complexity.
Summary Summary CobraMax DM in Shale
CobraMax in Shale
Summary Summary AquaStim Service RedTech Audio File
Advanced Technologies Focused on Improving Production from Unconventional Reservoirs Halliburton’s new AquaStim water frac service technologies are already helping operators achieve better fracturing results: • Improved production. • Improved load recovery. • Minimized sand and formation material flowback. • Reduced fracture face damage.
Summary Summary AquaStim Water Frac Service Video
AquaStim video describes AquaStim service covering GasPerm 1000, FR-56, SandWedge, and OptiKleen-WF along with case histories.
Summary Summary Cobra Frac H Animation
Animation Of The Cobra Frac H Process
Summary Summary New Interventionless Fracturing Technique Rescues Stranded Assets
Diversion technology helps increase lengths of lateral and number of clusters effectively fracture-stimulated
Summary Summary Advanced Multizone Stimulation Technology
SPE Paper #95778 - Advanced Multizone Stimulation Technology
Summary Summary Manufacturing Approach to Fracturing Limits
In the Rocky Mountains in Wyoming, a manufacturing approach is being developed to enable fracture stimulation of hundreds of gas wells from one semipermanent location that can operate around the clock.
Summary Summary Fracturing Fluid Systems
The fluid systems are designed to implement a treatment according to design in order to help increase production and improve the Operator’s return on investment.
Summary Summary Chemistry Scoring Index for Production Enhancement
Provides a Solid Basis for Choosing More HSE-Focused Chemistry for Stimulation Treatments
Summary Summary CobraMax® DM Service
Enables High-Intensity Multistage Fracturing with Proppant Concentration Control
Summary Summary OptiKleen-WF™ Viscosity Reducing Agent
In fracturing unconventional gas reservoirs, friction reducers have been shown to cause fracture face damage and have demonstrated damaging effects to fracture conductivity.
Summary Summary Hybor™ Fracturing Fluid
The Hybor fluid system is one of the industry’s most popular and widely used fracturing fluids.
Summary Summary ADP™ Advanced Dry Polymer Blender
ADP™ Advanced Dry Polymer Blender for Fracturing Fluids - Environmental Advancement Eliminates the Need for Hydrocarbon-based Concentrates
Summary Summary MISCO2 FracSM Service
CO2 Miscible Hydrocarbon-Based Fracturing Fluid System Designed for Stimulating Gas Reservoirs Up to 135°C – Especially Suited for Low Pressure and/or Water Sensitive Gas Reservoirs
Summary Summary GasPerm 1000SM Service
Helps Control Fracture Face Damage and Boost Production from Unconventional Gas Reservoirs
Summary Summary ROCC™ Remote Operations Command and Control Center Capabilities
Optimize Completions, Improve Service Quality, Enhance HSE Performance
Summary Summary SandWedge® ABC Aqueous-Based Conductivity Enhancement System
Halliburton’s continuing research focused on achieving highly conductive fractures has resulted in a new aqueous-based version of SandWedge® enhancer.
Summary Summary ShaleLog® Service - Shale Formation Analysis for Fracturing Treatment Design Optimization
The Halliburton shale formation analysis and fracturing treatment design optimization process (ShaleLog® service) provides information critical to developing a shale asset:
Summary Summary WG-35 Gelling Agent
WG-35 gelling agent is a powdered, high-viscosity, rapidyielding, intermediate-residue guar gum.
Summary Summary My-T-Oil V™ Fracturing Fluid
Oil Gelling Surfactant Technology for Preventing Damage Due to Polymer Residue
Summary Summary TechCommand® Center (TCC) 5000 Mobile Command
Command Station for Data Acquisition and Job Control During Hydraulic Fracturing Treatments
Summary Summary Cobra Frac H Service
Cobra Frac® H service enables a virtually unlimited number of frac stages in a horizontal section plus post-frac analysis to determine the e9ectiveness of the treatment.
Summary Summary CleanStim™ AUS Fracturing Fluid
Fully disclosable version of CleanStim® fracturing fluid formulation made entirely from components sourced from the food industry. It provides an extra measure of HSE protection. Plus, it normally provides better results than conventional fracturing fluids.
Summary Summary BE-7™ Bactericide
EPA-Registered Oil-Field-Use Microbiocide Suitable for Batch-Type and On-the-Fly Treatment of Water
Summary Summary FB4K Blender
Halliburton’s FB4K blender is designed with versatility in mind. The combination of three sand screws, three dry feeders and seven liquid additive systems means Halliburton can meet the requirements of virtually any fracturing design.
Summary Summary Seawater-based Fluid System for Fracturing and FracPacSM Service (SeaQuest® HT Service)
SeaQuest® HT service includes a new, proprietary fluid system that helps achieve enhanced well performance and more flexible service delivery for both shelf and deepwater operations:
Summary Summary PERMVIS™ VFR-10 Friction Reducer
PERMVIS™ VFR-10 friction reducer can effectively perform in waters with a variety of ions (sodium, calcium, sulfates, strontium, magnesium, iron, chlorides).
Summary Summary CleanStim™ Hydraulic Fracturing Fluid System
CleanStim™ fracturing service uses a new fracturing fluid formulation made with ingredients sourced from the food industry.*
Summary Summary CleanStream Service—Ultraviolet Light Bacteria Control Process for Fracturing Fluid
CleanStream service, an ultraviolet (UV) light bacteria control process, uses a mobile unit capable of treating fracturing fluid at rates up to 100 bbl/min. Using the service enables Operators to significantly reduce the volume of biocides used to treat for aerobic and anaerobic (sulfate reducing) bacteria.
Summary Summary BioVert NWB Diverter for Near-Wellbore Applications
Manage Fluid Placement for Fracturing, Acidizing, Sand Control and Water Control Treatments
Summary Summary DeepQuestSM Service
DeepQuestSM service helps enable fracpack and hydraulic stimulation of ultra-deep reservoirs without exceeding the safety limits of surface equipment, tubulars, and high-pressure manifolds.
Summary Summary Halliburton Geomechanics Laboratory
Accurate Analysis of Geomechanical Properties to Improve Exploration, Drilling and Completion Design, and Reservoir Management
Summary Summary Stim Star Arabian Gulf Stimulation Service Vessel
Halliburton introduces the first stimulation vessel designed specifically for dedicated use by Saudi Aramco.
Summary Summary AccessFracSM Stimulation Service
Enhanced Proppant Distribution Provides Improved Access to Complex Fracture Networks in Shale Formations
Summary Summary CobraMax H Fracturing Service
Pinpoint stimulation technology to Effectively Fracture Horizontal Wellbores and Overcome the Effects of Flow Convergence
Summary Summary AquaStimSM Water Frac Service
Advanced Technologies Focused on Improving Production from Unconventional Reservoirs
Summary Summary CoalStim® Service
Helps Boost Cash Flow From CBM Assets
Summary Summary Cobra Elite Service
Operators can now quickly and cost-efectively stimulate multiple zones that require larger, higher rate treatments than are possible with conventional coiled tubing-based fracturing. CobraElite® fracture stimulation service uses Hydra-Jet perforating service with a unique bridge plug that can be set and unset multiple times without coming out of the hole.
Summary Summary CE Marked Fracturing and Cementing Pumps
Halliburton Pumps that Meet the Requirements of Relevant European Directives
Summary Summary SilverStim® UR Fracturing Service
New SilverStim® UR fracturing fluid is optimized for fracturing low-temperature coalbeds and other unconventional gas producing reservoirs. This fluid system enables Operators producing from low-temperature reservoirs to take advantage of the proven performance of guar-based borate crosslinked fluids with virtually no damage to the formation.
Summary Summary ShaleEval Service
Halliburton ShaleEval shale formation evaluation service through the Duncan Technology Center (DTC) is designed to help operators, geologists, and engineers answer key questions at critical junctures during the life of the shale asset.
Summary Summary DeepQuest HT Fracturing Service for HPHT Reservoirs
DeepQuestSM HT service enables fracture stimulation of high pressure and high temperature reservoirs without exceeding the safety limits of surface treating equipment and wellbore tubulars.
Summary Summary SandCastle PS-2500 Proppant Silo
Revolutionary Vertical Proppant Storage System Saves Space and Reduces On-Site Emissions
Summary Summary Halliburton Hydraulic Fracturing
Halliburton Company was founded on one of the most profound advancements in protecting the environment from which hydrocarbons are produced.
Summary Summary pHaserFrac(SM) Service
Salt Tolerant, CO2 Compatible and Cold Temperature Capable Fluid System Helps Prevent Clay Swelling and Fines Migration
Summary Summary Mimic™ Device
Directly Measures the Ability of a Fracturing Fluid to Transport Proppant
Summary Summary Q10™ Pumping Unit
Today’s shale fracturing treatments have stretched the abilities of legacy pumping systems to the extreme edges of the performance envelope.
Summary Summary CobraMax Fracturing Service
Provides the Performance of Conventional Through Tubing Fracturing with the Speed and Versatility of Coiled Tubing Operations. New CobraMax service enables more efficient performance than ever before possible for fracturing multiinterval vertical wells.
Summary Summary DFIT Analysis Service
Challenge: How to determine pore pressure and permeability critical fracture design parameters in a well containing 26 zones when pressure-buildup tests are impractical and wireline formation testers have proved ineffective?
Summary Summary Sirocco Fracturing Service
New Sirocco service extends the proven benefits of low polymer fracturing fluid to higher temperature wells with the added benefit of salt compatibility.
Summary Summary Delta FoamSM Service
Halliburton’s Delta FoamSM service has been specially formulated for low pressure and water sensitive reservoirs where operators have often encountered difficulty in effectively employing production enhancement methods.
Summary Summary MistFrac(SM) Service (Data Sheet)
New Technology Enables More Effective Fracturing Treatments in Sensitive Reservoirs. MistFrac(SM) service uses an ultra-high-quality nitrogen foam fracturing fluid that, compared to conventional foam fracs, provides several advantages: results in less water contact on formations; minimizes reservoir sensitivity problems associated with clays, iron minerals, high foamer concentrations, and large volumes of fluid; provides improved ability to place proppant in water-sensitive formations compared to straight N2 or CO2 fracs; provides fast, clean breaks at very low reservoir temperatures; cleans up better after treatment for improved conductivity; requires less equipment, personnel, fluids and chemicals on a location while reducing fluid disposal costs; helps get the well on line quicker.
Summary Summary ViCon NF™ Fracturing Fluid Breaker
Improved Fracture Fluid Cleanup Capability Provides Virtually 100% Retained Permeability with Mid-to-High-Temperature Fracturing Gel Systems
Summary Summary Fas Drill® Drillable Composite Tools - Customer Webinar Sign in required
Webinar of Fas Drill® Drillable Composite Tools
Summary Summary PermStim Fracturing Service Sign in required
Overview of PermStim service with fluid comparison video
Summary Summary SurgiFrac® Service Increases Production; Adds Approximately $112,000 of Value (Case History) Sign in required
An operator needed to accurately place an acid treatment throughout a 1600 foot horizontal open hole section of a 6,765 foot well in the Niagaran reef.
Summary Summary Devonian Stimulation Increases Value by Approximately $2.75 Million (Case History) Sign in required
An operator needed to provide adequate stimulation for a 12,000 foot well in a Devonian formation with open Strawn perforations above the completion packer.
Summary Summary MRIL® Tool Finds New Zone, StiMRIL Confirms It Sign in required
A customer working in a South Texas field drilled his first prospect and wanted as much technical support as possible to determine the potential of the well.
Summary Summary Recommended Flowback Procedures (Best Practice) Sign in required
A complete review of the reservoir and fracturing treatment needs to be made before developing a flowback procedure. The most critical parameters to consider are water sensitivity of formation, closure stress, proppant type used, fracture geometry, and type of fracturing fluid used.
Summary Summary SandWedge® Conductivity Enhancer Sign in required
Following is a Best Practices guide to the proper handling, design and usage of SandWedge® Conductivity Enhancer.
Summary Summary Bacteria Problems in Fracturing Gels Sign in required
Bacteria have a long history of causing viscosity instability in batch mixed gels. In fact, when in a favorable environment, sufficient numbers of bacteria can be the chief cause of gel degradation.
Summary Summary Fluid-Loss Additives Sign in required
The leakoff characteristics of a fracturing fluid are an important parameter in the design and execution of a hydraulic fracturing treatment. Reducing the amount of fracturing fluid that leaks off into the formation during a treatment will increase the fracturing fluid volume that is available to maintain or propagate the fracture.
Summary Summary Breakers Sign in required
This Best Practices article describes the latest Halliburton technology to help design engineers and fracturing customers select and use fracturing fluid breakers effectively. Chemical descriptions of breakers and the breaking process are presented here. Note that this article focuses on water-based fluids and does not cover oil-gelled fluids and breakers.
Summary Summary Cobra Frac Service
Operating in today's aging reservoirs, operators are challenged with finding an effective method for stimulating shallow sand formations in under pressured gas reservoirs. In addition, in long intervals, an initial fracturing treatment may not effectively
Summary Summary Cobra Frac® Animation
Cobra Frac® Animation
Summary Summary Integrated Completions
Delivering Better Wells, Easier and Faster
Summary Summary FracTrac® Service Microseismic Fracture Mapping
Enables real-time monitoring of fracture treatments for optimized results.
Summary Summary Microseismic Source Mechanisms Must Be Understood Before Results Can be Accurately Interpreted
Microseismicmapping has proved to be a valuable technology for monitoring hydraulic fractures and other reservoir processes.
Summary Summary Fracture Engineering
Center of Excellence for Fracture Engineering
Summary Summary Hydrocarbon Based Systems
Halliburton’s gas well stimulation technology uses an oil-based fluid system for formation compatibility and provides rapid recovery of the fracturing fluid.
Summary Summary MISCO2 Frac®Service
Helps enable rapid recovery of frac fluids from the producing formation helping achieve more production faster.
Summary Summary My-T-OilSM V Service - Oil-Based Gel System
Developed for use in oil wells, My-T-Oil V service uses a continuous mix, cross-linked anionic surfactant oil-based gel system.
Summary Summary ConductorSM Fracturing Service
The ultimate goal of well stimulation is to get higher production out of an asset.
Summary Summary Sigma® Process
Achieving maximum asset performance requires an in-depth understanding of the interdependence of all the technologies that affect the outcome of field development strategies. The Sigma® process enables the Operator and Halliburton team to take advantage of Halliburton’s integrated structure to achieve unprecedented asset performance.
Summary Summary Transcend™ Permeability Enhancers
The Transcend™ Permeability Enhancer portfolio is Halliburton’s premiere offering for flow enhancing technology.
Summary Summary RockPerm™ Service
RockPerm™ service is a laboratory testing process performed by specially trained technicians in local area labs.
Summary Summary EZ-Stim Service
Helps Improve Efficiency of Hybrid Fracturing Treatments and Stimulating Long Horizontals
Summary Summary AccessFrac® Stimulation Service
AccessFrac stimulation service is Halliburton’s process to optimize proppant distribution for improved long-term production performance.
Summary Summary Fracturing Treatment Design and Monitoring, and Asset Development
The SigmaSM process was created to improve the profitability of multi-well hydraulic fracturing programs.
Summary Summary Fracturing
Halliburton’s history of fracturing achievement is due to continuous devotion to technology development, extensive training and a global best practices process. Since Halliburton performed the first commercial fracturing treatment in 1949, over 1 million wells have been successfully fractured by the industry in the United States.
Summary Summary fracture-face-damage-control
The issue of how fracturing fluids damage the productivity of propped fractured wells is easily 50 years old.
Summary Summary SeaQuest® Service
Applicable in both shelf and deepwater environments, this service includes a new proprietary fluid system with characteristics that help achieve enhanced well performance
Summary Summary Water-based Gel Systems
Halliburton's water-based gel systems are enhanced, proprietary fluid systems
Summary Summary CleanStream® Ultraviolet Light Bacteria Control Process
CleanStream® ultraviolet light bacteria control process enhances environmental performance by reducing the volume of conventional biocides required.
Summary Summary ADP™ Advanced Dry Polymer Blender
The ADP™ advanced polymer blender enables mixing any of Halliburton's fracturing fluids using a dry polymer, eliminating the need for Hydrocarbon-based concentrates.
Summary Summary UniStim™ Hydraulic Fracturing Fluid System
Salt tolerant, CO2 compatible, and cold temperature capable fluid system minimizes clay swelling and fines migration to enhance frac treatment.
Summary Summary MicroScout® Service
Creating complexity in unconventionals reservoirs during the fracturing treatment is only the first step to realizing the reservoir’s full potential.
Summary Summary Friction Reduced Water Treatments
Historically, fracturing treatments using friction-reduced water for the fracturing fluid (commonly called water fracs) have relied mainly on hydraulic horsepower and minimal amounts of proppant.
Summary Summary LoSurf™ Family of Surfactants
The LoSurf™ family of surfactants helps to optimize the performance of Halliburton’s fracturing fluids.
Summary Summary Ex-tension PacSM Service
Ex-tension Pac SM service provides improved productivity from high perm formations at no additional cost.
Summary Summary Excelerate™ Friction Reducers and FightR™ Friction Reducers
Excelerate and FightR friction reducers provide exceptional performance and value for applications in unconventional and tight gas fracture stimulation.
Summary Summary Fracturing Fluid Additives
Halliburton uses specially designed additives to maximize fracturing fluid potential. These additives are customized to work with Halliburton fluid systems.
Summary Summary Prodigi™ AB Intelligent Fracturing Service
In unconventional fracturing design, there are many parameters used to optimize stimulation treatment outcomes.
Summary Summary Proppant Diagenesis
The diagenesis process occurs rapidly in a fracture. Under heat and pressure, the proppant reacts with the formation face to form deposits that plug proppant pack porosity. Halliburton’s proppant coating technologies help alleviate diagenesis.
Summary Summary ExpressSand Delivery System
The ExpressSand Delivery System provides a step change in proppant management by optimizing the value chain of proppant logistics while also drastically improving HSE and equipment reliability at the wellsite.
Summary Summary Frac of the Future™
A step change improvement in modern fracturing operations.
Summary Summary Q10™ Pump
Complete new pump design provides higher horsepower and reliability than any other pump in the industry, also with a reduced environmental footprint
Summary Summary SandCastle™ PS-2500 Vertical Storage System
Revolutionary vertical proppant storage system saves space and reduces on-site emissions
Summary Summary Breakers
General Overview of Halliburton's Breaker Technology
Summary Summary Breaker Technology
Chemicals used to reduce the viscosity of fracturing fluids are called breakers.
Summary Summary Pinpoint Multistage Fracturing
Halliburton is the undisputed market leader in multi-stage pinpoint reservoir stimulation.
Summary Summary Foamed Gel Systems
Halliburton’s foamed gel systems are designed to enhance production in low-pressure and water-sensitive reservoirs
Summary Summary stress-induced-complexity-in-brittle-rock
In order to capitalize on the complexity created in Brittle rock, alternate sequence fracturing can be used to reduce or possibly reverse the stress anisotropy.
Summary Summary reservoir-diversion-in-moderately-brittle-rock
More fracture complexity can be created in moderately brittle rock by using far-field diversion to overcome the stress anisotropy and open up natural fractures or planes of weakness in the rock heterogeneity
Summary Summary fracture-intensity-in-ductile-rock
Fracturing in Ductile rock will most often result in a bi-wing fracture with little to no complexity
Summary Summary CobraMax® DM fracturing service with Downhole Mixing
Optimize each fracture treatment by real-time control of rate and proppant concentration at the perforations in response to reservoir pressure with the use of CobraMax® DM fracturing service with Downhole Mixing