Baroid

Let us help you take the lead

At Baroid, we are at the forefront of the drilling and completion fluids industry, and our mission is to develop and deploy innovative fluid technologies that can ultimately help you produce more for less. To ensure maximum fluid performance, we engineer state-of-the-art separation solutions that will remove unwanted solids at the surface, ensure recovery of fluids for reuse in the active system, and optimize your rate of penetration (ROP).

We know you are focused on delivering the highest level of performance in your fields and your wells. That's why, at Baroid, we are focused on delivering fluid performance to help you maximize the value of your asset.

 
Technical Papers - OnePetro

Technical Papers

Learn about the latest technology breakthroughs from one of the energy industry’s top innovators.

Technical Papers - OnePetro

Filter By  
Количество записей на странице Show     results per page
  TitleНазвание  DateДата
Summary Summary How Halliburton beat a client’s drilling average by 43%, saving them more than $200,000.
Integrated bit, fluid and drilling services allowed Halliburton to model, measure and optimize continuously, saving 3.6 days.
Summary Summary N-SOLATE® Packer Fluids - Sales Data Sheet
N-SOLATE™ Packer Fluids - Water-Based Solids-Free Insulating Packer Fluids Provide Long-Term Protection Against Heat Transfer & Corrosion
Summary Summary BaraH2O™ Slop Unit Sales Data Sheet
Modular, highly efficient slop treatment through chemical and mechanical separation
Summary Summary Waste Handling and Transport Solutions Sales Data Sheet
Baroid Waste Handling and Transport Solutions Sales Data Sheet
Summary Summary WellSET® Lost Circulation Treatment - Sales Data Sheet
Helps prevent Lost Circulation by strengthening the wellbore
Summary Summary BaraShale™ Lite Fluid System - Sales Data Sheet
For Fields with Salt Formations and Low Fracture Pressures
Summary Summary Waste Treatment and Disposal Solutions Sales Data Sheet
Baroid Waste Treatment and Disposal Solutions Sales Data Sheet
Summary Summary Waste Management Solutions and Services Sales Data Sheet
Baroid Waste Management Solutions and Services Sales Data Sheet
Summary Summary Hi-Flow DE Filtration Unit
Halliburton Baroid's Hi-Flow DE Filtration Unit
Summary Summary BaraKlean® Solutions - Sales Data Sheet
Residual oil and solids left behind by drilling operations can accumulate in drilling equipment, hindering completion operations and can also damage the producing formation.
Summary Summary Solids Control Equipment and Services Sales Data Sheet
Baroid Solids Control Equipment and Services Sales Data Sheet
Summary Summary BaraPure® Drilling Fluid System - Sales Data Sheet
BaraPure® salt-free, high-performance non-aqueous fluid system provides operators a salt-free, organophilic clay-free fluid system to help improve drilling performance and reduce overall AFE in technically challenging wells and locations with strict environmental regulations.
Summary Summary High Performance BaraMesh™ Shale Shaker Screens
High Performance BaraMesh™ Shale Shaker Screens Sales Data Sheet
Summary Summary Filtration Services Sales Data Sheet
Baroid Filtration Services Sales Data Sheet
Summary Summary BaraShield®-664 - Sales Data Sheet
Halliburton Baroid’s BaraShield -664 lost circulation material (LCM) is designed to help prevent and remediate lost circulation by quickly sealing a wide range of fractures in permeable and impermeable formations and remediate fluid losses when utilized as a LCM pill.
Summary Summary BARADRIL-N Acid Soluble Drill-in Fluid System - Sales Data Sheet
The BARADRIL-N® system is one of the specialized fluid systems within Baroid’s DRIL-N® fluids family. It is specifically formulated and designed for drilling, completion, or workover operations in horizontal and vertical wells.
Summary Summary EZ MUL® NS - Product Data Sheet
EZ MUL® NS polyaminated fatty acid can be used to emulsify water into oil in non-aqueous phase (NAP) drilling fluids. It is used to help improve a drilling fluid's oil-wetting characteristics and is designed for use in NAP fluids that contain high levels of divalent salts (i.e. CaCl2) in the fluid's water phase.
Summary Summary DURATONE® E - Product Data Sheet
DURATONE® E organophilic lignite is used to help control filtration rates in ester and olefin based drilling muds. DURATONE E is stable at high temperatures and it can be used to control filtration rates in deep, hot wells. It can also be used to improve emulsification of water in oil-based muds and to promote fluid stability. DURATONE E meets environmental requirements for Norway.
Summary Summary EZ-PLUG® - Product Data Sheet
EZ-PLUG blend of acid soluble lost circulation control materials is designed for use in non-damaging fluids. Applications/Functions Seepage loss control Bridge across permeable formations Plug voids, fractures, and microfractures Minimize damage due to solids Minimize fluid invasion in production zone Advantages Acid soluble Formulated to work in conjunction with drill-n systems Compatible with all drilling and completion fluids Disperses easily in clear brines Particle size distribution designed for all types of losses Typical Properties
Summary Summary GEM™ GP - Product Data Sheet
GEM GP polyalkylene glycol is used in water-based drilling fluids to help improve lubricity and shale stability. It is recommended for use in potassium and sodium based salt (5-22 percent by weight) systems in areas where low to medium reactive clays are anticipated.
Summary Summary FORTI-MUL® - Product Data Sheet- Product Data Sheet
FORTI-MUL® emulsifier is the primary emulsifier and oil-wetting agent for application in BaraXcel™ 1 drilling fluid system. When FORTI-MUL emulsifier is used with RHEMOD™ L viscosifier and ADAPTA® L filtrate reducer, it aids in producing a stable invert emulsion system with low filtration rates.
Summary Summary EZ-MUD® GOLD - Product Data Sheet
EZ-MUD® GOLD, clay and shale stabilizer, provides inhibition of clay and shale formations in water-based drilling fluids without substantially increasing viscosity. EZ-MUD GOLD, when added to a QUIK-GEL® or BORE-GEL® slurry, yields an inhibitive drilling fluid system while maintaining manageable and effective fluid properties. The unique beaded structure of EZ-MUD GOLD allows the material to be mixed easily at minimal shear thereby eliminating the need for liquid emulsions.
Summary Summary EP MUDLUBE® - Product Data Sheet
EP MUDLUBE® modified tall oil fatty acid can be used to help impart extreme pressure lubricating properties to drilling fluids.
Summary Summary EZ SPOT® - Product Data Sheet
EZ SPOT™ is a concentrated blend of emulsifiers, lubricants, and viscosifiers. When added to base oil and mixed with water, EZ SPOT forms a stable invert emulsion that can be added to help free differentially stuck pipe. Densities of pills formulated with EZ SPOT can be increased with additions of barite, hematite, or other common weighting agents.
Summary Summary DEXTRID® LTE™ Filtration Control Additive - Product Data Sheet
DEXTRID® LTE™, modified potato starch helps provide filtration control with minimum viscosity buildup in water-based drilling fluids.
Summary Summary DEXTRID® E™ Filtration Control Additive - Product Data Sheet
DEXTRID® E™ modified starch helps provides filtration control with minimum viscosity buildup in water-based drilling fluids. Through its coating mechanism, DEXTRID E filtration control additive helps to reduce dispersion of clay particles and stabilize reactive formations.
Summary Summary CON DET® - Product Data Sheet
CON DET®, a blend of water soluble anionic surfactants, can be used in fresh or salt water and in low-solids muds as a wetting agent.
Summary Summary BARACOR® 450 - Product Data Sheet
BARACOR® 450 inhibitor is a thiocyanate based inorganic compound used for corrosion protection in solids-free brine packer fluids.
Summary Summary BaraSpot™-581 Pipe-Freeing Agent - Product Data Sheet
BaraSpot™-581 (formerly CFS™-581) pipe-freeing agent is a liquid blend of components designed to be mixed with brine and pumped downhole to dissolve any acid-soluble materials causing differential sticking of downhole tubulars. In the event of stuck pipe it is common practice to pump live acid to free the pipe, but live acid can be spent prior to reaching the stuck pipe location.
Summary Summary BARANEX® Filtration Control Additive - Product Data Sheet
BARANEX® filtration control agent is sulphonated lignite for use in water-based drilling fluid systems.
Summary Summary BARAZAN® D™ Viscosifier/Suspension Agent - Product Data Sheet
BARAZAN® D™ viscosifier/suspension agent is a powdered Xanthan gum polymer used to viscosify fresh water, seawater and monovalent brines. BARAZAN D viscosifier/suspension agent is treated with a dispersant to help improve mixing and promote the yield of the product with reduced amounts of shear as compared to BARAZAN® viscosifier/suspension agent. BARAZAN D viscosifier/suspension agent can provide excellent suspension and sheer thinning properties and be used up to 250°F (121°C).
Summary Summary ADAPTA® L Filtration Control Additive - Product Data Sheet
ADAPTA® L (formerly BDF™-929) filtration control agent provides a rapid reduction in the HTHP filtrate of invert emulsion drilling fluids. This product has been designed to function similarly to other copolymer additives for moderate to standard operating temperatures. ADAPTA L is a liquid polymer suspension, which also may provide secondary viscosity to the fluid system.
Summary Summary ACCOLADE® BASE Base Fluid - Product Data Sheet
ACCOLADE® base fluid is an ester/internal olefin blend created to have the highest level of environmental performance along with superior rheological properties in the ACCOLADE High-Performance drilling fluid system. The ACCOLADE base oil can be used in applications up to 300°F (149°C). Use of ACCOLADE drilling fluids allows for cutting discharge in Gulf of Mexico (GOM) applications.
Summary Summary BARAKLEAN® - Product Data Sheet
BARAKLEAN® cleaner is a surfactant solution used for surface cleaning applications. BARAKLEAN can be used to remove water- and oil-based mud residues from pits, tanks, circulating lines and manifolds. BARAKLEAN will remove oil and grease from hard surfaces.
Summary Summary CRYSTAL-DRIL® - Product Data Sheet
CRYSTAL-DRIL® shale stabilizer is a synthetic liquid polymer used for both shale inhibition and solids flocculation.
Summary Summary CMO-568™ - Product Data Sheet
CMO-568™ lubricant can be used to enhance lubricity in invert emulsion fluids.
Summary Summary BaraFLC® IE-513 Filtration Control Additive - Product Data Sheet
BaraFLC® IE-513 (formerly BDF™-513) filtration control additive is a cross-linked polymer that provides filtration control in non-aqueous systems. It also provides secondary viscosity and is suitable for use in fluids designed for deepwater application. BaraFLC IE-513 filtration control additive is best suited for low solvency base oils. BaraFLC IE-513 filtration control additive is recommended as the primary filtration control agent for our organophilic clay free fluids.
Summary Summary ADAPTA® Filtration Control Additive - Product Data Sheet
ADAPTA® filtration control additive is a cross-linked polymer that can provide filtration control in all non-aqueous systems up to about 425°F (218°C). It can also provide secondary viscosity and is suitable for use in fluids designed for deepwater applications. ADAPTA filtration control additive is the primary filtration control agent for organophilic clay-free invert emulsion fluids.
Summary Summary BAROFIBRE®-O - Product Data Sheet
BAROFIBRE®-O lost circulation material is a finely ground blend of natural plant fibers designed to seal the borehole wall in both porous sands and micro-fractured shales.
Summary Summary BARAFOS® Thinner - Product Data Sheet
BARAFOS modified sodium polyphosphate compound is used as a thinner and dispersant in fresh water muds.
Summary Summary BARA-DEFOAM® W300 - Product Data Sheet
BARA-DEFOAM® W300 blend of high molecular weight alcohol and modified fatty acid derivatives is oil-soluble and slightly water dispersible.
Summary Summary BDF™-662 Shale Stabilizer - Product Data Sheet
BDF™-662 Shale Stabilizer
Summary Summary BORE-PLUS™ Suspension Agent - Product Data Sheet
BORE-PLUS™ acrylate copolymer additive is used in water-based drilling fluids as a filtration control agent.
Summary Summary BARACARB® - Product Data Sheet
BARACARB® sized-calcium carbonate is available in six grades: 5, 25, 50, 150, 600, 2300.
Summary Summary BARAFILM™ - Product Data Sheet
BARAFILM aminated fatty acid can be used to protect drillpipe. BARAFILM inhibitor is used to physically and chemically adsorb on metal thereby wetting and protecting it from hydrogen sulfide, carbon dioxide, and oxygen corrosion. BARAFILM inhibitor has been used effectively to protect the metal surface of drill pipe in air, mist, and foam drilling operations.
Summary Summary BaraLube® W-661 Lubricant - Product Data Sheet
BaraLube® W-661 Product Data Sheet
Summary Summary AQUAGEL GOLD SEAL® Viscosifier - Product Data Sheet
AQUAGEL GOLD SEAL® viscosifier is a premium Bentonite that contains no polymer additives. AQUAGEL GOLD SEAL viscosifier meets API specifications 13A, section 9 requirements. This product acts primarily as a viscosifier but also aids in filtrate reduction for water-based drilling fluids. AQUAGEL GOLD SEAL viscosifier works best in fresh water-based fluids
Summary Summary BaraVis® IE-570 Viscosifier - Product Data Sheet
BaraVis® IE-570 (formerly BDF™-570) viscosifier is an oil soluble organic product designed to provide increased low end rheology and fragile gels in organophilic clay-free high performance invert emulsion fluids. The product can be used alone or in conjunction with TAU-MOD® viscosifier or RHEMOD™ L viscosifier for even greater effect. BaraVis IE-570 viscosifier is suitable for use in offshore and environmentally sensitive areas.
Summary Summary BARACARB®-DF - Product Data Sheet
BARACARB®-DF sized-calcium carbonate is available in six grades: 5, 25, 50, 150, 600, 2300.
Summary Summary BAROID® 41 Weighting Material- Product Data Sheet
BAROID® 41 weighting material is ground Barite and used to increase the density of drilling fluids to control formation pressures. BAROID 41 weighting material has a specific gravity of 4.1 and can be used to increase the density in oil and water-based drilling fluids up to 20 lb/gal (2.40 SG). BAROID 41 weighting material is more widely available than standard BAROID weighting material. It is chemically inert and does not affect drilling fluid chemical properties
Summary Summary BARACOR® 700E - Product Data Sheet
Inhibitor blend of phosphate esters is designed to prevent oxygen corrosion in monovalent fluids, in mist or foam drilling applications and in aerated drilling fluids
Summary Summary BROMI-MUL™ - Product Data Sheet
BROMI-MUL™ nonionic surfactant emulsifier is especially designed to emulsify high density brines such as sodium chloride, sodium bromide, calcium chloride, calcium bromide, and zinc bromide into diesel, crude or mineral oils.
Summary Summary CFS™-962 Pipe Dope Remover
CFS™- 962 pipe dope remover is a solvent-based mixture used in clean tubing joints prior to well completion operations. Residual pipe dope has significant formation damage potential. This high solvent capacity of CFS-962 ensures removal of excess dope from tubing internals.
Summary Summary BORE-HIB® Shale Stabilizer - Product Data Sheet
BORE-HIB® shale stabilizer is a liquid blend that can provide inhibition and stabilization of highly reactive clays. It helps to seal pores and micro-fractures in the formation, reduce bit-balling and accretion tendencies, and reduce corrosion. BORE-HIB shale stabilizer has no hydrocarbons or synthetic oils and can be used in applications up to 325°F (163°C). BORE-HIB shale stabilizer is incompatible with divalent ions. If used with sea water, hardness should be treated out prior product addition or dilution.
Summary Summary BARABRINE® DEFOAM - Product Data Sheet
BARABRINE DEFOAM liquid blend of nonionic surfactants can be used to eliminate foam from water-based drilling fluids and brines.
Summary Summary BaraVis® IE-489 Rheology Modifier - Product Data Sheet
BaraVis® IE-489 (formerly BDF™-489) Rheology Modifier is a solid organic-based product that can increase the low shear rheology and Tau 0 values in INNOVERT® and other high-performance oil-based mud systems. This product can be used as a standalone product or in conjunction with RHEMOD™ L viscosifier and TAU-MOD® viscosifier. This product is particularly effective for non-weighted and low density fluids.
Summary Summary BROMI-VIS® - Product Data Sheet
BROMI-VIS viscosifier is a liquid dispersion of activated HEC in a water soluble carrier. BROMI-VIS viscosifier is used to viscosify high density brines that contain calcium bromide and zinc bromide.
Summary Summary BARO-LUBE GOLD SEAL™ - Product Data Sheet
Blend of surfactants and lubricants formulated to be an effective alternative to oil-based lubricants where environmental constraints preclude use of hydrocarbon-based materials.
Summary Summary BARAZAN® D PLUS™ Viscosifier/Suspension Agent - Product Data Sheet
BARAZAN® D PLUS™ viscosifier/suspension agent is a is premium quality, powdered Xanthan gum polymer that is used to viscosify fresh water, seawater and monovalent brines. BARAZAN D PLUS viscosifier/suspension agent is treated with a dispersant to promote the yield with reduced amounts of shear for improved mixing properties. BARAZAN D PLUS viscosifier/suspension agent has higher yield specifications and develops more viscosity / suspension than equivalent concentrations of BARAZAN® or BARAZAN® D™ viscosifiers/suspension agents. BARAZAN D PLUS viscosifier/suspension agent can be used up to 250°F (121°C)
Summary Summary BaraKlean®-648 Casing Cleaner - Product Data Sheet
BaraKlean®-648 Casing Cleaner - Product Data Sheet
Summary Summary AQUATONE-S™ - Product Data Sheet
AQUATONE-S™ oxyethylated compound is a concentrated aqueous solution of a nonionic surfactant containing an optimum proportion of defoamer. The surface-active properties of AQUATONE-S surfactant help reduce interparticle force and help provide easier control of rheological and filtration properties in water-based muds.
Summary Summary BARABRINE® SI - Product Data Sheet
BARABRINE SI water-soluble, liquid scale inhibitor is used for the prevention of alkaline earth metal scale deposits.
Summary Summary BARO-LUBE NS™ - Product Data Sheet
BARO-LUBE NS lubricant is an environmentally acceptable polymeric fatty acid solution which can effectively reduce torque and drag in waterbased and most emulsion-based drilling fluids.
Summary Summary BARATHIN-PLUS® Thinner - Product Data Sheet
BARATHIN-PLUS® thinner highly effective deflocculant is specifically formulated to help provide increased rheological control in low pH (8.5 - 9.5) environments in fresh water, seawater, and saturated salt water drilling fluids.
Summary Summary BARAPLUG® - Product Data Sheet
BARAPLUG® sized and treated salts has a wide distribution of particle sizes suitable for bridging and sealing productive formations. It is available in three grades: 20, 50 and 6/300 (see graph below). BARAPLUG resists caking in the bag and disperses easily into the brine system.
Summary Summary BARA-PERFLUID™ - Product Data Sheet
Specially formulated fluid loss control pill to minimize water-based completion fluid losses while perforating oil or gas payzones
Summary Summary BaraLock®-666.M LCM - Product Data Sheet
BaraLock®-666.M premium medium-sized reticulated foam lost circulation material (LCM) is used as a supplement to any LCM pill formulation in any fluid type and any formation, but not intended for reservoir applications. This proprietary, engineered, supplemental solution is designed to help seal fractures up to at least 10,000 microns.
Summary Summary BaraSure™ W-546 Shale Stabilizer - Product Data Sheet
BaraSure™ W-546 (formerly BDF™-546) shale stabilizer is a mixed dry product that incorporates two shale stabilizing agents to provide superior clay inhibition at a very low concentration. BaraSure W-546 shale stabilizer is designed to be used in SHALEDRIL® fluid systems utilized for drilling reactive clay and shale. BaraSure W-546 shale stabilizer can be used in low solids non-dispersed (LSND) and low clay SHALEDRIL systems, but is incompatible with divalent brines. If used with sea water, or brackish make-up water, total hardness should be lowered below 600 ppm prior to the introduction of BaraSure W-546 shale stabilizer.
Summary Summary BDF™-443 Filter Cake Breaker - Product Data Sheet
BDF™-443 Filter Cake Breaker Product Data Sheet
Summary Summary BDF™-921 Lubricant - Product Data Sheet
BDF-921 Drilling Lubricant - Product Data Sheet
Summary Summary AQUAGEL® Viscosifier - Product Data Sheet
AQUAGEL® viscosifier is a treated premium grade Bentonite. AQUAGEL viscosifier is finely ground to aid in dispersion and meets API specifications 13A, section 9 requirements. This product can provide viscosity and gelling characteristics to most water-based drilling fluids and also helps reduce fluid loss and filtrate seepage into the formation
Summary Summary BARO-TROL® PLUS - Product Data Sheet
BARO-TROL PLUS® fine-grind, blended hydrocarbon powder is partially dispersible in water
Summary Summary BARO-SEAL® - Product Data Sheet
BARO-SEAL a combination of granules, flakes, and fibers can be used with most water-based drilling fluids in a wide range of formations to seal loss zones. The particles are tough and retain their shape under pressure and temperature. BARO-SEAL lost circulation material is specifically designed not to plug drilling equipment. It is available in coarse, medium, and fine grades.
Summary Summary ADAPTA® 450 - Product Data Sheet
ADAPTA® 450 filtration control agent is a cross-linked polymer that can provide filtration control in oil and synthetic based fluid systems at temperatures up to 450°F (232°C).
Summary Summary BARABUF® - Product Data Sheet
BARABUF® alkaline material is used as a pH buffer in fresh water, brines, and brine polymer systems.
Summary Summary Baroid® Rig Wash - Product Data Sheet
BAROID® RIG WASH, a blend of water-soluble surface active agents, is a heavy-duty surface active agent designed to be used directly or diluted for general purpose cleaning.
Summary Summary BARAFLOC® - Product Data Sheet
BARAFLOC partially hydrolyzed polyacrylamide is used to flocculate clays and shales encountered in drilling operations.
Summary Summary BaraLube®-921
BaraLube®-921 lubricant (formerly known as BDF™-921) is designed to reduce torque and drag while drilling with oil-based, water-based, concentrated brine and produced water drilling fluid systems. This product is a hydrocarbon blend which is tolerant of high temperatures, extreme pH values and elevated concentrations of chlorides, calcium and ammonia. BaraLube-921 is formulated for cold weather storage. In addition to a reduction in drill string torque, it can decrease the tendencies for bit-balling, stuck pipe and other causes of low ROP. BaraLube-921 can be added to drilling fluid systems without detrimental effects on rheology and performance.
Summary Summary BORE-VIS® II™ Viscosifier - Product Data Sheet
BORE-VIS® II™ improved blend of viscosifiers is used to help increase flow properties in water-based drilling fluids.
Summary Summary BARASCAV™ D - Product Data Sheet
BARASCAV™ D, powdered sodium sulfite, effectively scavenges soluble oxygen from water-based drilling fluid systems. BARASCAV D extends the life of organic polymers by eliminating conditions that promote their thermal degradation.
Summary Summary AKTAFLO®-S™ Wetting Agent - Product Data Sheet
AKTAFLO®-S™, an oxyethylated alkyl phenol, is a concentrated aqueous solution of a nonionic surfactant containing an optimum proportion of defoamer. The surface-active properties of AKTAFLO-S reduce interparticle force and provide easier control of rheological and filtration properties.
Summary Summary BaraCor® W-476 - Product Data Sheet
BaraCor® W-476 Corrosion Inhibitor Product Data Sheet
Summary Summary BDF™-638 Viscosifier - Product Data Sheet
BDF-638 - Product Data Sheet
Summary Summary BARAFLAKE - Product Data Sheet
BARAFLAKE® sized calcium carbonate chips are an acid soluble engineered product that can be used alone for lost circulation applications, or preferably as a supplement to other lost circulation treatments such as BaraBlend®-657 lost circulation material (LCM).
Summary Summary BaraSure™ W-674 Shale Stabilizer - Product Data Sheet
BaraSure™ W-674 (formerly BDF™-674) shale stabilizer is a cationic organic multivalent clay inhibitor for polymer-based drilling, workover and completion fluids. BaraSure W-674 is completely water soluble and environmentally acceptable and may be used in freshwater, seawater, low-solids or weighted systems.
Summary Summary BARACOR® 700 - Product Data Sheet
BARACOR 700 inhibitor is a blend of phosphonates and alkyl phosphates specifically designed to prevent oxygen corrosion in monovalent brines, aerated drilling fluids, and air rich drilling fluid systems such as mist or foam drilling applications.
Summary Summary CARBONOX® Filtration Control Additive - Product Data Sheet
CARBONOX®, powdered leonardite, can be used to aid in filtration control and control viscosity and gel strengths of water-based drilling fluids. CARBONOX can also be used to emulsify oil into water-based fluids.
Summary Summary BARABLOK™ 400™ Filtration Control Additive - Product Data Sheet
BARABLOK™ 400™ powdered hydrocarbon resin (asphaltite) is a natural bitumen with a high softening point that permits the product to extrude into formation fractures and bedding planes, and bond the matrix to prevent sloughing.
Summary Summary CFS™-969 Casing Cleaner
CFS™-969 casing cleaner is a powerful blend of surfactants and solvents used in displacement and wellbore cleanup operations.
Summary Summary BaraSure™ W-590 Shale Stabilizer - Product Data Sheet
BaraSure™ W-590 (formerly BDF™-590) shale stabilizer is used to inhibit the hydration of formations containing reactive clays and shales. It is effective in the majority of water-based drilling fluids, from freshwater to high salinity at temperatures up to 400°F (204°C). The optimal mode of use of the BaraSure W-590 shale stabilizer is - pH 7 - 10, but it is also effective in the lime muds. BaraSure W-590 shale stabilizer helps reduce bit-balling and improves drill solids removal. When using the BaraSure W-590 shale stabilizer together with thickeners based on bentonite, the bentonite should be pre-hydrated before it’s added into the drilling mud. BaraSure W-590 shale stabilizer can effectively be used instead of potassium chloride in drilling fluids for production intervals.
Summary Summary BARACTIVE™ - Product Data Sheet
BARACTIVE glycerol enhances the performance of all-oil drilling and coring systems. Because these systems contain no added water, the activator provides an environment in which the organophilic lignites and clays can function efficiently. BARACTIVE also contributes osmotic character to all-oil fluids similar to high water phase salinity.
Summary Summary COLDTROL® Thinner - Product Data Sheet
COLDTROL® thinner is used to control the rheological properties of oil-based and synthetic-based drilling fluids at low temperatures. It helps prevent low-temperature gelation effects that occur in drilling fluids at low temperatures.
Summary Summary BaraFLC® W-690 Filtration Control Additive - Product Data Sheet
BaraFLC® W-690 (formerly BDF™-690) high temperature filtration control additive is a special starch derivative, intended for reducing high-pressure/high-temperature (HPHT) filtrate loss for water-based fluids. It is non-ionic in nature and suitable for fluids containing salts or ion sensitive additives.
Summary Summary CFS™-901 - Product Data Sheet
CFS™-901 casing cleaner is a powerful blend of surfactants and solvents used in fluid displacement and cleanup operations.
Summary Summary BARAZAN® Viscosifier/Suspension Agent- Product Data Sheet
BARAZAN® viscosifier/suspension agent is a powdered Xanthan gum polymer used to viscosify fresh water, seawater and monovalent brines. BARAZAN viscosifier/suspension agent can provide excellent suspension and shear thinning properties. It contains no dispersants or bacterial stabilizers. BARAZAN viscosifier/suspension agent can be used up to 250°F (121°C).
Summary Summary ALDACIDE® G - Product Data Sheet
ALDACIDE® G, a glutaraldehyde solution, is used to control bacteria growth in water-based drilling fluids. ALDACIDE G is recommended for use with systems containing polymers that are readily biodegradable (i.e. starches, biogums, etc.).
Summary Summary BaraLock®-666.F LCM - Product Data Sheet
premium fine-sized reticulated foam lost circulation material (LCM) is used as a supplement to any LCM pill formulation in any fluid type and any formation, but not intended for reservoir applications. This proprietary, engineered, supplemental solution is designed to help seal fractures up to at least 3,000 microns.
Summary Summary BaraShield®-664 LCM - Product Data Sheet
BaraShield®-664 medium-sized granular multi-modal lost circulation material is used to prevent or remediate seepage to partial lost circulation in any fluid type and is applicable in any formation – not intended for reservoir applications.
Summary Summary BaraLube® W-511 - Product Data Sheet
BaraLube® W-511 Lubricant Product Data Sheet
Summary Summary BaraDefoam™ W-611 Defoamer - Product Data Sheet
BaraDefoam™ W-611 (formerly BDF™-611) defoamer is a blend of non-ionic detergents and an emulsion of organic silicone polymers in water.
Summary Summary BARABLOK™ Filtration Control Additive - Product Data Sheet
BARABLOK™ powdered hydrocarbon resin (asphaltite) is a natural bitumen with a high softening point that permits the product to extrude into formation fractures and bedding planes, and bond the matrix to prevent sloughing. BARABLOK contains no chemical treatment and can be used in water-based or oil-based drilling fluids. BARABLOK can be used with temperatures up to 350°F (177°C).
Summary Summary BARA-DEFOAM® HP - Product Data Sheet
BARA-DEFOAM® HP polypropylene glycol is a versatile and effective defoamer for most water-based drilling fluids.
Summary Summary BaraKlean® -934 Casing Cleaner - Product Data Sheet
BaraKlean® -934 casing cleaner is a powerful blend of surfactants and solvents used in fluid displacement and cleanup operations. BaraKlean® -934 casing cleaner has a high cleaning capacity and a strong wetting action to break up and disperse mud film and residue.
Summary Summary BARASCRUB™ - Product Data Sheet
BARASCRUB, a terpene surfactant, is soluble in diesel-based drilling fluids and miscible in mineral oil-based and synthetic-based drilling fluids. BARASCRUB is recommended for removing oil-wet solids from casing prior to displacement with a clear brine completion fluid. BARASCRUB is also effective as a pipe dope remover prior to pumping pipe pickling solutions.
Summary Summary CFS™-926 Casing Cleaner - Product Data Sheet
CFS™-926 casing cleaner is a powerful blend of surfactants and solvents used in fluid displacement and wellbore clean-up operations.
Summary Summary BaraFLC® W-403 Filtration Control Additive - Product Data Sheet
BaraFLC® W-403 (formerly BDF™-403) filtration control additive is a modified and bacterially stabilized tapioca starch that provides viscosity buildup in water-based drilling fluids
Summary Summary BaraFLC® W-490 Shale Stabilizer/Filtration Control Additive - Product Data Sheet
BaraFLC® W-490 (formerly BDF™-490) shale stabilizer / filtration control additive is a sulfonated asphalt, partially soluble in water and oil, and can be used in water and oil-based fluids where it functions as a shale stabilizer, cuttings dispersion inhibitor and contributes to high temperature fluid loss control. It is stable to many normal drilling fluid contaminants, operates at a broad pH range and is suitable for use up to 340°F (170°C). BaraFLC W-490 shale stabilizer / filtration control additive helps to form a thin yet tough wall cake and the small particles can effectively plug micro-fractures.
Summary Summary CON DET® E - Product Data Sheet
CON DET® E blend of water soluble anionic surfactants can be used in fresh or salt water and in low-solids drilling fluids as a wetting agent. CON DET E wetting agent is specially formulated to meet North Sea discharge standards.
Summary Summary BaraLock®-666.C LCM - Product Data Sheet
BaraLock®-666.C premium coarse-sized reticulated foam lost circulation material (LCM) is used as a supplement to any LCM pill formulation in any fluid type and any formation, but not intended for reservoir applications. This proprietary, engineered, supplemental solution is designed to help seal fractures up to at least 25,000 microns (< 1 inch).
Summary Summary BAROFIBRE® - Product Data Sheet
BAROFIBRE®, fibrous cellulosic material, is designed to effectively seal the borehole wall in sands and fractured zones.
Summary Summary BaraFLC®-903 Filtration Control Additive - Product Data Sheet
BaraFLC®-903 (formerly BDF™-903) filtration control additive is sulfonated asphalt and used primarily in both water-based fluids and standard invert emulsion fluids. BaraFLC-903 filtration control additive helps to form a thin and tough filter cake where the small hydrophobic particles can effectively bridge micro-fractures.
Summary Summary BARA-DEFOAM® 1 - Product Data Sheet
BARA-DEFOAM® 1 blend of high molecular weight alcohol and modified fatty acid derivatives can be used to reduce or remove surface foam in fresh water and sea water drilling fluids and in viscosified brines.
Summary Summary BARACAT® - Product Data Sheet
BARACAT® high-charge density cationic polymer helps provide shale and clay inhibition in CAT-I cationic, water-based drilling fluid systems. The positively charged polymer readily adsorbs opposite negative charges on shales and clays, neutralizing the charge imbalance. The net result reduces the water demand and hydration rates of reactive formations.
Summary Summary BaraShield®-663 LCM - Product Data Sheet
BaraShield®-663 premium fine-sized granular multi-modal lost circulation material is used to provide wellbore stability in any fluid type and is applicable in any formation – not intended for reservoir applications.
Summary Summary BARACOR® 95 - Product Data Sheet
BARACOR® 95 liquid amine compound is a highly active inhibitor which combats the effects caused by carbonates and CO2 contamination.
Summary Summary BARASORB® - Product Data Sheet
BARASORB filter aid absorbent is a completion brine filtration additive that can reduce the oil and grease content of completion fluids. Environmental regulations may limit the amount of oil and grease content on fluid discharges in certain regions. Use of BARASORB oil absorbent can help reduce the oil and grease content and thereby reduce environmental risk and disposal costs.
Summary Summary CLAY GRABBER® Shale Stabilizer - Product Data Sheet
CLAY GRABBER® is a high molecular weight, non-ionic 35-40% active liquid polymer supplied as a low viscosity emulsion for use in water-based drilling fluids.
Summary Summary BAROLIFT® - Product Data Sheet
BAROLIFT® sweeping agent is a specially treated monofilament fiber.
Summary Summary AQUA-LATE™ - Product Data Sheet
AQUA-LATE™ base fluid is a non-aqueous fluid spacer for FUSE-IT® lost circulation material applications.
Summary Summary BARA-PERFLUID™ O - Product Data Sheet
Specially formulated fluid loss control pill to minimize oil-based completion fluid losses while perforating oil or gas payzones
Summary Summary BaraVis® IE-568 Viscosifier - Product Data Sheet
BaraVis® IE-568 (formerly BDF™-568) viscosifier provides increased low end rheology in invert emulsion systems. The product also imparts a strong, but easily broken gel in organophilic clay free fluids. The product can be used in conjunction with TAU-MOD® viscosifier for even greater effect. BaraVis IE-568 viscosifier can be used in deep water and HTHP fluid applications.
Summary Summary BaraVis® Viscosifier - Product Data Sheet
BaraVis® a nonionic hydroxyethylcellulose (HEC) polymer is designed to viscosify fresh water, sea water, and the following brines: Calcium chloride, Potassium chloride, Sodium chloride, Potassium bromide, Sodium bromide.
Summary Summary BaraSure™ W-499 Shale Stabilizer - Product Data Sheet
BaraSure™ W-499 (formerly BDF™-499) shale stabilizer is a liquid a blend of amine salts used in water based drilling fluids, formation treatments and work-overs. It is suitable for most polymer and clay free water based fluid systems. BaraSure W-499 shale stabilizer should not be used with fluids containing clay based viscosifiers. BaraSure W-499 shale stabilizer inhibits clay and shale hydration and is a high efficiency stabilizer for smectite, illite, shale and mixed layer clay/shale minerals.
Summary Summary BXR-L™ Shale Stabilizer - Product Data Sheet
BXR-L™ sulfonated asphalt and hydrocarbon resin (asphaltite) is dispersed in glycerol, polyglycerols, and polypropylene glycol.
Summary Summary BRINEDRIL-VIS™ - Product Data Sheet
BRINEDRIL-VIS™ water-soluble biopolymer exhibiting exceptional shear thinning rheology and suspension properties.
Summary Summary CFS™-963 Pipe Dope Remover
CFS™- 963 pipe dope remover is a solvent-based mixture used in clean tubing joints prior to well completion operations. Residual pipe dope has significant formation damage potential. This high solvent capacity of CFS-963 ensures removal of excess dope from tubing internals.
Summary Summary BaraBlend®-665 LCM - Product Data Sheet
BaraBlend®-665 premium granular, high fluid loss lost circulation material (contains fine-sized reticulated foam) can be used in fresh or salt water in any formation – not intended for reservoir applications.
Summary Summary BARASCAV™ L - Product Data Sheet
BARASCAV L is a concentrated solution of ammonium bisulfite. It is a liquid oxygen scavenger recommended for use in drilling fluids and other systems where oxygen is causing corrosion problems.
Summary Summary CLAY-SYNC™ II™ Shale Stabilizer - Product Data Sheet
CLAY-SYNC™ II™ shale stabilizer is a low molecular weight, non-ionic 100% active dry polymer for use as a clay inhibitor in water-based drilling fluids.
Summary Summary BARAZAN® L™ Viscosifier - Product Data Sheet
BARAZAN® L™ liquid biopolymer (xanthan gum) can provide viscosity and suspension in fresh water, sea water, sodium bromide, potassium bromide, potassium chloride, and sodium chloride-based fluids.
Summary Summary BDF™-442 Filter Cake Breaker - Product Data Sheet
BDF™-442 Filter Cake Breaker Product Data Sheet
Summary Summary BaraKlean®-647 Casing Cleaner - Product Data Sheet
BaraKlean®-647 Casing Cleaner - Product Data Sheet
Summary Summary CLAYSEAL® PLUS™ Shale Stabilizer - Product Data Sheet
CLAYSEAL® PLUS™, a low molecular weight amphoteric material, reduces dispersion and hydration of reactive clays and shale formations.
Summary Summary BaraVis® IE-615 Viscosifier - Product Data Sheet
BaraVis® IE-615 (formerly BDF™-615) viscosifier is a liquid polymer latex that is used to increase low end rheology and provide suspension in invert emulsion drilling fluids. It can be used in conventional and clay-free high performance fluids. BaraVis IE-615 viscosifier can be used at a wide range of temperatures.
Summary Summary BARACOR® 100 - Product Data Sheet
BARACOR® 100 inhibitor is a highly active, film-forming, water-dispersible corrosion inhibitor for use in solids-free brines.
Summary Summary Gulf of Mexico: Innovative Use of N-SOLATE® Packer Fluid in Gulf of Mexico Drilling Operation
Innovative Use of N-SOLATE® Packer Fluid in Gulf of Mexico Drilling Operation
Summary Summary Customized Lost Circulation Treatments Help Resolve Severe Losses in Highly Fractured Geothermal Wells
Geothermal wells in Northern California are drilled in highly fractured volcanic reservoirs, where massive fluid losses can bring operations to a halt.
Summary Summary SHALEDRIL® F Water-Based Fluid Proves Successful on Troublesome Fayetteville Shale
The Marrowian shale that lies above the Fayetteville Shale in Arkansas is highly reactive and prone to fracturing and delamination. It is typically drilled with an Invert Emulsion fluid, which reduces the chance of swelling of this formation.
Summary Summary LSNAF System Increases Productivity in HPHT Wells
Åsgardfield in the Norwegian Sea is characterized as having high-temperature, high-pressure field with low permeability sandstone.
Summary Summary Applied Fluids Optimization (AFO) Service Enables Cross-Discipline Collaboration in Operator’s RTOC
Applied Fluids Optimization Service Expands and Integrates RTOC Wellsite Data Analysis Functions for More Accurate Modeling of Downhole Conditions
Summary Summary Applied Fluids Optimization Monitoring Prevents Problems Before They Occur
Halliburton proposed monitoring the well with Halliburton’s Applied Fluids Optimization (AFO) service.
Summary Summary Kazakhstan: N-FLOW™ 325 Filter Cake Breaker System Leads to Increased Production Rate
N-FLOW™ 325 Filter Cake Breaker System Leads to Increased Production Rate
Summary Summary Kazakhstan: INNOVERT® System Used in Well’s Record-Breaking Performance
An operator working in the Karachaganak field was looking for an innovation that would optimize the incumbent drilling program in an effort to further reduce costs and improve the efficiency of the stimulation process.
Summary Summary STEELSEAL® Lost Circulation Material and BARACARB® Bridging Agent Help Apache Improve Wellbore Stability
STEELSEAL® Lost Circulation Material and BARACARB® Bridging Agent Help Apache Improve Wellbore Stability and Cut Costs by 50%
Summary Summary Venezuela: Halliburton's SupaVac SV400 Pumping System Helped Clean Mud Pits 65% Faster, Saving US$ 6.3 MM of Rig Time
The challenge was to provide a waste management solution that would accelerate the cleaning operation and significantly reduce downtime.
Summary Summary DEXTRID® Filtration Control Additive - Product Data Sheet
DEXTRID® modified and bacterially stabilized potato starch helps provide filtration control with minimum viscosity buildup in water-based drilling fluids.
Summary Summary EZ GLIDE™ - Product Data Sheet
EZ GLIDE proprietary blend of surfactants is specially formulated to help provide friction reduction in water-based fluids.
Summary Summary GEM™ CP - Product Data Sheet
GEM CP polyalkylene glycol is used in water-based drilling fluids to help improve lubricity and shale stability. It is recommended for use in potassium- and sodium-based salt (2-15 percent by weight) systems in areas where highly reactive clays are anticipated.
Summary Summary EZ-CORE™ Emulsifier - Product Data Sheet
EZ-CORE™ refined tall oil fatty acid can be used as a passive emulsifier in all-oil coring and drilling systems.
Summary Summary FLO-CLEAN™ MD - Product Data Sheet
FLO-CLEAN MD polymer is a revolutionary new way to ensure a faster, safer displacement to reduce wellbore cleanup and filtration in non-zinc brines.
Summary Summary ENCORE® BASE - Product Data Sheet
ENCORE® BASE fluid is 100% isomerized olefin-based fluid which is designed to have acceptable environmental compliance for the Gulf of Mexico standards that allow cuttings discharge.
Summary Summary EZ-MUD® - Product Data Sheet
EZ-MUD®, partially hydrolyzed polyacrylamide/polyacrylate (PHPA) copolymer emulsion, is used to stabilize reactive clay and shale formations. EZ-MUD acts as a shale stabilizer by adsorbing onto cuttings and clays on the borehole wall, preventing dispersion. Because of its high molecular weight, EZ-MUD quickly viscosifies with increased concentrations.
Summary Summary EZ MUL® - Product Data Sheet
EZ MUL®, polyaminated fatty acid, can be used to emulsify water into oil in diesel oil-based drilling fluids. It is used to improve a drilling fluid's oil-wetting characteristics and is designed for use in oil-based fluids that contain high levels of divalent salts (i.e. CaCl2, MgCl2) in the fluid's water phase.
Summary Summary FLO-CLEAN™ Z - Product Data Sheet
FLO-CLEAN™ Z polymer is a revolutionary new way to ensure a faster, safer displacement to reduce wellbore cleanup and filtration in zinc brines.
Summary Summary DUO-SQUEEZE™ H - Product Data Sheet
DUO-SQUEEZE™ H lost circulation material is a unique blend which includes a resilient graphitic carbon material, with an optimized bimodal particle size distribution.
Summary Summary DURATONE® HT - Product Data Sheet
DURATONE® HT organophilic leonardite is used to help control filtration rates in oil-based drilling muds.
Summary Summary DRILTREAT® - Product Data Sheet
DRILTREAT® lecithin liquid dispersion can quickly change the natural water-wetting characteristics of drilled solids and weighting agents in oil muds, making them preferentially oil-wetting.
Summary Summary DEEP-TREAT™ Wetting Agent - Product Data Sheet
DEEP-TREAT™ wetting agent is a solid powder oil-wetting agent that can be added to invert emulsion drilling fluids to reduce flow properties and gel strengths. DEEP-TREAT wetting agent should be added in small quantities because it is highly-efficient and fast-acting. Overtreatment of a system with DEEP-TREAT wetting agent can lead to very low flow properties, which can be difficult to restore to optimum levels for drilling and cleaning a wellbore. DEEP-TREAT wetting agent is suitable for use in INVERMUL® and ENVIROMUL™ drilling fluids.
Summary Summary EZ-MUD® DP - Product Data Sheet
EZ-MUD® DP partially hydrolyzed polyacrylamide/polyacrylate (PHPA) copolymer dry powder is used to stabilize reactive clays and shale formations. EZ-MUD DP acts as a shale stabilizer by inhibiting cuttings and clays in the borehole wall, preventing dispersion. Because of its high molecular weight, EZ-MUD DP quickly viscosifies with increased concentrations.
Summary Summary GELTONE® V - Product Data Sheet
GELTONE V organophilic clay imparts viscosity and suspension properties to oil-based drilling fluids.
Summary Summary GEM GPE - Product Data Sheet
GEM™ GPE shale stabilizer is a blend of polyglycols used in water-based drilling fluids to help improve shale stability and lubricity. Recommended for potassium and sodium salt based fluids but can be used in fresh water non-dispersed fluids when low to medium reactive clays and shale are anticipated.
Summary Summary FOAM-ZAPPER™ - Product Data Sheet
FOAM-ZAPPER™ defoamer can be used to reduce or remove surface foam and entrained air in fresh and sea water drilling fluids as well as viscosified brines.
Summary Summary FILTER-CHEK™ Filtration Control Additive - Product Data Sheet
FILTER-CHEK™ modified starch can be used to ensure filtration control in water-based fluids with minimum viscosity buildup.
Summary Summary ENVIRO-TORQ® - Product Data Sheet
ENVIRO-TORQ® blend of modified fatty acids and emulsifiers can be used in water-based drilling fluids to help enhance mud lubricity, reduce torque and drag on drillstrings, and formulate spotting fluid pills to free stuck pipe.
Summary Summary EZ MUL® NT - Product Data Sheet
EZ MUL® NT, polyaminated fatty acid, can be used to emulsify water into oil in oil-based drilling fluids. It is used to improve a drilling fluid's oil-wetting characteristics and is designed for use in oil-based fluids that contain high levels of divalent salts (i.e. CaCl², MgCl²) in the fluid's water phase. EZ MUL NT is the primary emulsifier in the INVERMUL® RF systems.
Summary Summary GELTONE® II - Product Data Sheet
GELTONE II organophilic clay, imparts viscosity and suspension properties to oil-based drilling fluids.
Summary Summary DRIL-N-SLIDE™ - Product Data Sheet
DRIL-N-SLIDE™ blend of organics is used to help improve the lubricity and penetration rate of water-based drilling fluids.
Summary Summary ENVIRO-THIN™ - Product Data Sheet
ENVIRO-THIN chrome-free iron lignosulfonate helps control flow properties and filtration rates of water-based drilling fluids.
Summary Summary DEXTRID® LT™ Filtration Control Additive - Product Data Sheet
DEXTRID® LT™ modified potato starch helps provide filtration control with minimum viscosity buildup in water-based drilling fluids.
Summary Summary FACTANT™ - Product Data Sheet
FACTANT highly concentrated tall oil derivative provides both HTHP filtration control and stable emulsification. The product may be utilized in all nonaqueous base fluids and is effective at lower concentrations than traditional additives.
Summary Summary N-SEAL™ - Product Data Sheet
N-SEAL acid soluble lost circulation material is specially formulated extrusion spun mineral fiber.
Summary Summary NXS-LUBE™ - Product Data Sheet
NXS-LUBE® lubricant is a synthetic blend that reduces downhole friction between metal-to-metal and metal-to-formation contacts.
Summary Summary IRON-THIN™ Thinner - Product Data Sheet
IRON-THIN™ thinner is a chrome-free iron lignosulfonate that helps control flow properties and filtration rates of water-based dispersed drilling fluids.  
Summary Summary HYDRO-PLUG® NS - Product Data Sheet
HYDRO-PLUG NS lost circulation material hydrates to plug vugular and cavernous formations.
Summary Summary N-VIS® HI™ Viscosifier - Product Data Sheet
N-VIS HI, a mixed metal silicate, provides enhanced hole cleaning capabilities and formation stability.
Summary Summary OMC® Thinner - Product Data Sheet
OMC® sodium petroleum sulfonate is used to lower rheological properties in oil-based fluids.
Summary Summary N-FLOW™ 408 - Product Data Sheet
Delayed acid generating material for the slow release of acid in completion operations at elevated temperatures.
Summary Summary OMC® 2™ Thinner - Product Data Sheet
OMC 2 oligomeric fatty acid is used to lower rheological properties in oil-based fluids. OMC 2 is recommended for fluids containing organophilic clays or large quantities of drilled solids.
Summary Summary NO-BLOK® Z - Product Data Sheet
NO BLOK® Z non-emulsifer is designed to prevent formation of emulsions between zinc bromide completion brines and crude oil. Formation of emulsions with crude oil can lead to reduced reservoir productivity.
Summary Summary OMC® 42™ Thinner - Product Data Sheet
OMC® 42™ polyimide surfactant is effective in lowering rheological properties in oil-based fluids. OMC 42 is recommended for fluids containing organophilic clays or large quantities of drilled solids.
Summary Summary MultiSweet MX 8-3207 - Product Data Sheet
MultiSweet MX 8-3207 concentrated organic sulfide scavenger is for use in all brine and water-based fluid systems.
Summary Summary N-VIS® HI PLUS - Product Data Sheet
N-VIS® HI PLUS mixed metal hydroxide can provide enhanced hole cleaning capabilities and formation stability.
Summary Summary NO-SULF® - Product Data Sheet
NO-SULF blend of zinc compounds is designed to efficiently remove hydrogen sulfide from drilling fluids.
Summary Summary HYDRO-PLUG® - Product Data Sheet
HYDRO-PLUG lost circulation material hydrates to plug vugular and cavernous formations.
Summary Summary N-VIS® Viscosifier - Product Data Sheet
N-VIS polymer is a premium quality xanthan product recommended for use where formation protection, solids suspension, and improved hole cleaning are primary concerns.
Summary Summary IMPERMEX® Filtration Control Additive - Product Data Sheet
IMPERMEX pregelatinized cornstarch provides filtration control in water-based drilling fluids. IMPERMEX agent is stable in saline drilling fluids that contain small amounts of divalent ions.
Summary Summary NO BLOK® C - Product Data Sheet
NO BLOK C emulsifier is a unique blend of surface active agents designed to help prevent brine/oil emulsions which can occur during well completion operations.
Summary Summary INHIBI-TAR™ - Product Data Sheet
INHIBI-TAR™ rapid-acting blend of solvents, surfactants and inorganic salts is designed to reduce borehole stability problems while drilling tar.
Summary Summary LIQUI-VIS® EP - Product Data Sheet
LIQUI-VIS® EP is a high purity HEC polymer dispersed in a water soluble carrier. It is designed to viscosify fresh water, salt water, and brines.
Summary Summary N-VIS® P PLUS™ Viscosifier - Product Data Sheet
N-VIS P PLUS blend of xanthan gum with a specially processed, stabilized nonionic starch ether is synergistic and yields improved static suspension and provides a highly shear-thinning viscosity under dynamic conditions.
Summary Summary INVERMUL® NT - Product Data Sheet
INVERMUL NT blend of oxidized tall oil and polyaminated fatty acid is the basic ingredient of Baroid's water-in-oil emulsion drilling fluids.
Summary Summary OMC® 3™ Thinner - Product Data Sheet
OMC® 3™ fatty acid derivative is used to lower rheological properties in esters and non-aqueous fluid systems. OMC 3 conditioner is recommended for fluids containing organophilic clays or large quantities of drilled solids.
Summary Summary OXYGON™ Scavenger - Product Data Sheet
OXYGON™ is a non-sulfite oxygen scavenger used to minimize the corrosive effects of soluble oxygen. Dissolved oxygen can be removed from drilling, completion and packer fluids. OXYGON works in conjunction with inhibitors, other scavengers and biocides to minimize corrosion and avoid damage to drilling and completion equipment.
Summary Summary LE SUPERMUL™ - Product Data Sheet
LE SUPERMUL polyaminated fatty acid, can be used to emulsify water into PETROFREE LE drilling fluids.
Summary Summary N-DRIL™ HT PLUS™ Filtration Control Additive - Product Data Sheet
N-DRIL™ HT PLUS™ filtration control additive is a cross-linked starch product intended for reducing HTHP filtrate loss for water based fluids, particularly in reservoir sections. N-DRIL HT PLUS filtration control additive is suitable for use in all water-based fluids including drilling, completion, and work-over fluids. It has minimal damage characteristics and is readily removed with acid or N-FLOW™ delayed acid generators. When used with oxygen scavengers or within formate brines, N-DRIL HT PLUS filtration control additive is effective up to 300°F (149°C).
Summary Summary N-FLOW™ 325 - Product Data Sheet
Delayed acid generating material for the slow release of acid in completion operations at elevated temperatures.
Summary Summary N-VIS® L™ Viscosifier - Product Data Sheet
N-VIS L polymer is a highly refined, clarified xanthan biopolymer in liquid form. The product is recommended to provide suspension in drilling, drill-in and completion fluids.
Summary Summary RHEMOD™ L - Product Data Sheet
RHEMOD L suspension agent viscosifier is a modified fatty acid for providing suspension and viscosity in non-aqueous drilling fluids.
Summary Summary STEELSEAL® 100 - Product Data Sheet
STEELSEAL® lost circulation material products are resilient, angular, dual-carbon based lost circulation materials.
Summary Summary PERFORMATROL® - Product Data Sheet
PERFORMATROL shale inhibitor is used with the PERFORMADRIL® system.
Summary Summary SUSPENTONE™ Suspension Agent - Product Data Sheet
SUSPENTONE™ suspension agent provides increased suspension of weighting agents and drill solids in invert emulsion fluids without a significant contribution to plastic viscosity. SUSPENTONE suspension agent is an organophilic clay that is suitable for all conventional invert emulsion fluids in applications up to 400°F (205°C). Compared to GELTONE® viscosifier products, SUSPENTONE suspension agent gives similar suspension properties with lower overall viscosity
Summary Summary STICK-LESS® 20 - Product Data Sheet
STICK-LESS 20 solid glass spherical beads are made of high-grade crown glass that has been heat annealed for fracture resistance.
Summary Summary TEMPERUS™ Viscosifier - Product Data Sheet
TEMPERUS™ viscosifier is a modified fatty acid for providing temporary viscosity.
Summary Summary WALL-NUT® - Product Data Sheet
WALL-NUT®, ground walnut shells, is used to combat lost circulation. WALL-NUT is available in three grades-fine, medium, and coarse. All three grades may be used in pills for spotting opposite thief zones and in high filtration squeeze slurries. WALL-NUT fine can be used in the active mud system to prevent lost returns.
Summary Summary PAC-L™ Filtration Control Additive - Product Data Sheet
PAC-L™ polyanionic cellulose provides filtration control in most water-based drilling fluids.
Summary Summary TORQUE-LESS® DI-170 - Product Data Sheet
TORQUE-LESS solid glass spherical beads are made of high-grade crown glass that has been heat annealed for fracture resistance.
Summary Summary STEELSEAL® 50 - Product Data Sheet
STEELSEAL® lost circulation material products are resilient, angular, dual-carbon based lost circulation materials.
Summary Summary PERFORMUL™ Emulsifier - Product Data Sheet
PERFORMUL™ emulsifier is a primary emulsifier for ENVIROMUL™ and INNOVERT® oil- based drilling fluid systems. PERFORMUL emulsifier is preferred for use in the Norwegian sector because it is a yellow-rated emulsifier. However, PERFORMUL emulsifier can be used worldwide in a number of different fluids.
Summary Summary XP-07™ BASE Base Fluid - Product Data Sheet
XP-07™ synthetic paraffin base fluid is a pure normal alkane mixture. The low kinematic viscosity of the fluid makes it easier to manage the rheological profile, thus having the ability to exhibit higher low end rheology. XP-07 base fluid is suitable for use in all ENVIROMUL™ and INNOVERT® drilling fluid applications and is particularly suited to North Sea HTHP applications. XP-07 base fluid is used to produce drilling fluids stable at temperatures beyond 420°F (215°C) and is highly biodegradable under aerobic and anaerobic conditions. XP-07 base fluid is also an excellent choice for applications where thermal desorption units will be used to recover base fluid
Summary Summary TAU-MOD® Viscosifier - Product Data Sheet
TAU-MOD® viscosifier is used to improve fluid stability, weight material suspension and hole cleaning capacity in high performance invert emulsion drilling fluids built using organophilic clay-free technology.
Summary Summary STARCIDE™ - Product Data Sheet
STARCIDE microbiocide solution is used to control bacteria growth in water-based drilling fluids.
Summary Summary VIS-PLUS® Suspension Agent - Product Data Sheet
VIS-PLUS® carboxylic acid imparts rheological stability to BAROID® 100 HT all-oil drilling fluid.
Summary Summary QUIK-FREE® NS™ Pipe-Freeing Agent - Product Data Sheet
When stuck pipe occurs, every minute saved can increase the chance that the pipe will be freed successfully. Every minute lost can increase the risk that the operation will end up as a fishing job.
Summary Summary PIPESCRUB™ - Product Data Sheet
PIPESCRUB specifically engineered blend of terpene surfactants is designed to remove excess pipe dope prior to pumping pipe pickling solutions.
Summary Summary STOPPIT® Hoja De Datos Técnicos
STOPPIT® Hoja De Datos Técnicos
Summary Summary RM-63™ Rheology Modifier - Product Data Sheet
RM-63™ rheology modifier is used to improve rheological and suspension characteristics of invert emulsion fluids. RM-63 rheology modifier can help to increase low shear rheological properties which improve cuttings transport, particularly in a highly deviated and horizontal wellbores, and helps to reduce barite sag. This product can be used in a wide range of oil/water ratios, and is suitable for use beyond 400°F (204°C).
Summary Summary PLUG-GIT® - Product Data Sheet
PLUG-GIT processed cedar fiber is added to drilling fluids to reduce and eliminate lost circulation.
Summary Summary THERMA-THIN® Thinner - Product Data Sheet
THERMA-THIN® thinner is used in water-based systems to control rheological properties and to impart high temperature stability. THERMA-THIN thinner is an effective deflocculant that can be used at a wide range of pH and is suitable for use up to 450°F (232°C). THERMA-THIN thinner can be used as a stand-alone product, or in combination with other thinners, such as lignosulfonates, that operate by different thinning mechanisms. THERMA-THIN thinner is particularly efficient in fresh water systems with low to medium solids concentrations
Summary Summary TORQ-TRIM® II - Product Data Sheet
TORQ-TRIM II alcohol amide is used as a nonpolluting lubricant for water-based drilling fluids.
Summary Summary QUIK-FOAM® - Product Data Sheet
QUIK-FOAM proprietary blend of biodegradable alcohol ethoxy sulfates (AES) is an effective foaming agent.
Summary Summary TORQ-TRIM® II PLUS - Product Data Sheet
TORQ-TRIM® II PLUS lubricant is a non-polluting lubricant for water-based drilling fluids.
Summary Summary THERMA-VIS™ Viscosifier - Product Data Sheet
THERMA-VIS™ viscosifier is a synthetic Hectorite and is used in THERMA-DRIL™ high-temperature water-based drilling fluids. THERMA-VIS viscosifier is stable at temperatures of up to 700°F (370°C) and does not thermally flocculate but is not tolerant of salinity. THERMA-VIS viscosifier is recommended to viscosify geothermal drilling fluids
Summary Summary STOP-FRAC® D - Product Data Sheet
STOP-FRAC D blend of lost circulation material is provided in a fine PELLETIZED form.
Summary Summary PAC-R™ Filtration Control Additive - Product Data Sheet
PAC-R™ a high molecular weight polyanionic cellulose provides filtration control and supplementary viscosity in most water-based drilling fluids.
Summary Summary XLR-RATE™ Pipe-Freeing Agent - Product Data Sheet
XLR-RATE™ proprietary blend of synthetic fluids is specifically engineered to help enhance the rate of penetration while drilling.
Summary Summary QUIK-THIN® Thinner - Product Data Sheet
QUIK-THIN® ferrochrome lignosulfonate can be used in all dispersed water-base systems to effectively control rheological properties at temperatures approaching 350°F (177°C).
Summary Summary STEELSEAL® 400 - Product Data Sheet
STEELSEAL® lost circulation material products are resilient, angular, dual-carbon based lost circulation materials.
Summary Summary STEELSEAL® 1000 - Product Data Sheet
STEELSEAL® lost circulation material products are resilient, angular, dual-carbon based lost circulation materials.
Summary Summary THERMA-FLOW 500™ - Product Data Sheet
THERMA-FLOW™ 500 high temperature water-based mud de-gelling / dispersant is used to control, reduce, maintain, or stabilize a fluid’s rheological properties.
Summary Summary TORQ-TRIM® 22 - Product Data Sheet
TORQ-TRIM® 22 blend of emulsifiers and alkaline surfactants is fully dispersible in water.
Summary Summary X-TEND® II - Product Data Sheet
X-TEND II polyacrylate/polyacrylamide copolymer helps increase the yield of bentonite clays in water-based drilling fluids.
Summary Summary ZEOGEL® Viscosifier - Product Data Sheet
ZEOGEL® attapulgite clay provides a high yield and rheological stability in systems that contain large concentrations of salt. ZEOGEL exceeds the API specification 13A viscosity requirements.
Summary Summary QUIK-FREE® Pipe-Freeing Agent - Product Data Sheet
QUIK-FREE® spotting fluid is formulated to release differentially stuck pipe.
Summary Summary THERMA-CHEK® Filtration Control Additive - Product Data Sheet
THERMA-CHEK® vinyl amide/vinyl sulfonate copolymer can provide filtration control in water-based drilling fluids at temperatures up to 450°F (232°C).
Summary Summary STOPPIT® Lost Circulation Material - Product Data Sheet
STOPPIT LCM may be used as a stand alone treatment or as a supplement to other lost circulation treatments.
Summary Summary Suspension Package 1, 2, 3
Baroid Suspension Package 1, 2 and 3 suspension agents are an integral part of BaraECD® High-Performance Drilling Fluid System.
Summary Summary SOURSCAV™- Product Data Sheet
SOURSCAV water-soluble iron gluconate is in powder/granular form.
Summary Summary STEELSEAL®-398 (Fine/Medium/Coarse)
STEELSEAL®-398 (F, M, & C) is a resilient, angular, carbon-based lost circulation material (LCM) used in water, oil or synthetic based drilling fluid systems as a preventative and/or remedial treatment to seal permeable and fractured formations. STEELSEAL®-398 LCM is chemically inert and thermally stable with good compressible and lubricity features. STEELSEAL®-398 LCM bridging and plugging capability can help reduce differential pressure sticking tendencies. STEELSEAL®-398 LCM is available in three grades: fine, medium and coarse.
Summary Summary POLYAC PLUS™ Filtration Control Additive - Product Data Sheet
POLYAC PLUS™ modified acrylic polymer is used in water-based drilling fluids as a filtration control agent.
Summary Summary RHEOBOOST™ - Product Data Sheet
RHEOBOOST fatty acid blend is used to extend the yield of organophilic clay, thereby helping improve the rheological properties of invert emulsion drilling fluids.
Summary Summary SWEEP-WATE® Weighting Material - Product Data Sheet
SWEEP-WATE® selectively sized barite is used in high density sweeps and slugs to enhance hole cleaning in deviated wells.
Summary Summary STEELSEAL® 25 - Product Data Sheet
STEELSEAL® lost circulation material products are resilient, angular, dual-carbon based lost circulation materials
Summary Summary STOP-FRAC® S - Product Data Sheet
STOP-FRAC S blend of coarse lost circulation material is provided in a PELLETIZED form.
Summary Summary PAC-RE™ Filtration Control Additive - Product Data Sheet
PAC-RE™ provides filtration control and supplementary viscosity in most water-based drilling fluids.
Summary Summary Baroid Successfully Executes LMP/DBP Operations for Offshore Oilfield Project
Enable fast mobilizations of large volumes of oil-based mud
Summary Summary BaraSure™ W-674 Shale Stabilizer Stops Clay Swelling and High Torque in Oil Sand Lateral
High risk of swelling clays. Excessive torque leading to stuck pipe. Oil sand accretion on the BHA
Summary Summary BaraShield®-663 LCM Cuts Seepage Losses by 75 Percent in Unconventional Well
LCM Solution saves operator approximately USD 25,700
Summary Summary Inhibitive HYDRO-GUARD® WBM and DFG™ Modeling Software Deliver Trouble-free Drilling, Saving US$ 360K
Offset wells experienced multiple downhole issues: » High torque » Lost circulation » Reactive clays » Gas and water flows » Differential sticking
Summary Summary BaraPhase™ TCC and BaraStream™ HCB™ Tanks Eliminate Skip-and-Ship Issues
Baroid Solutions enable operator to finish project six months ahead of schedule
Summary Summary Organoclay-Free Fluids Enable Operator to Drill and Complete Slim-Profile Well in Record Time
Baroid Fluid Systems and AFO Service help narrow ECD window in mature well
Summary Summary Custom Baroid Solids Control Strategy Helps Operator Save $1+ Million per Extended Reach Well
Customized Baroid system solves drilling challenges and delivers higher levels of performance
Summary Summary Optimized ENVIROMUL™ Fluid and WellSET® Treatments Help Save Costs on Horizontal Monobore Well
In a horizontal well profile, a monobore design is drilled as a single-diameter hole from the surface casing to total depth (TD).
Summary Summary Baroid Slurry Handling System Provides Cost-Effective Waste Disposal Solution
System enables operator to achieve zero discharge while drilling in environmentally sensitive area
Summary Summary HYDRO-GUARD® System Enables Operator to Achieve Drilling Record in Horizontal Well
System delivers significant cost savings and operational efficiencies
Summary Summary Combo LCM Pill Stems Losses in Deeply Fractured Carbonate Formation
LCM treatment saves operator approximately USD 600,000
Summary Summary Engineered HYDRO-PLUG® Pill Dramatically Cuts Loss Rate in Fractured Limestone
Upon spotting the pill, drilling resumed from 1,858 meters (6,096 feet) to 2,060 meters (6,758 feet), but the average loss rate was 180 bbl/hr. Bapetco was unable to continue drilling to the planned interval total depth (TD).
Summary Summary BaraECD® NAF Enables Operator to Use One Fluid for All Drilling Intervals
Baroid Fluid Solution optimizes drilling operations
Summary Summary BaraPhase™ TCC Proves Key for Zero-Discharge Waste Management
Baroid Solution efficiently transfers, processes, and stores drilling waste for offshore operations
Summary Summary Custom Water-Based Fluid Achieves New Drilling Record in Iraq’s Rumaila Field
Customized Fluid Systems saves 6.4 days of operation
Summary Summary BaraH2O™ Slop Treatment Unit Delivers Cost Reduction and Operational Efficiencies
System delivers significant cost savings and operational efficiencies
Summary Summary Customized Kill Mud Enables Operator to Abandon Well Ahead of Time, Saving USD 1 Million
» Minimize ECD while working with collapsed tubing » Develop a low-solids/low-rheology kill-weight mud within a tight time frame
Summary Summary Inhibitive HYDRO-GUARD® WBM Helps Set New Field Record, Saving USD 3 Million
Baroid Solution stabilizes wellbore in reactive clays
Summary Summary Operator Overcomes Lost Circulation Problems
BaraECD® High-Performance Non-Aqueous Fluid helps complete trouble-free cementing operation
Summary Summary BDF™-610 Filtration Control Additive Enables Operator to Improve Well Performance
Enable operator to decrease HPHT fluid losses and HSE risks, while improving wellbore stability and overall well performance
Summary Summary BaraCRI™ Cuttings Reinjection System Saves Operator USD 120,000 Per Month
CRI Solution enables operator to avoid costly skip-and-ship cuttings processing
Summary Summary BaraBlend®-665 and BaraLock®-666 LCM Pills Stop Severe Losses in Highly Fractured Formation
An operator in Pakistan’s Kadanwari field experienced severe downhole losses in the highly fractured Sui Main limestone formation. Offset well records in the Kadanwari field showed similar lost circulation incidents
Summary Summary Customized High-Performance NAF Delivers Stable HPHT Wellbore, Saving Significant Time and Cost
Enable operator to drill to total depth with minimal disruption and to obtain accurate logs of the reservoir, despite these conditions: » Highly reactive shale » Abnormal pressures » Depleted zones
Summary Summary EZ-GLIDE™ Lubricant Prevents High Torque in Oil Sands, Saving Rig Time
Lubricant enables operator to recover significant reservoir drilling fluid for reuse
Summary Summary Combo MOTF and SSRV System Saves Casing Run in Deepwater Development
Baroid Solutions enables operator to reduce Fluid Volumes, creating significant savings
Summary Summary BAROLIFT® Sweeping Agent and DFG™ Modeling Software Help Save 10 Days, $800K on Horizontal Well
An operator in Iraq’s West Qurna field faced hole cleaning challenges in the 8-1/2-inch and 6-1/8-inch intervals, as the wellbore transitioned through the build section (40–60° angle) into the 1,250-meter (4,101-foot) horizontal step-out. This was the first horizontal well drilled by the operator in this area. Drilling on offset wells had been delayed by frequent backreaming and sidetracking in the 8-1/2-inch section. There was a high risk of stuck pipe and loss of the well.
Summary Summary BaraECD® Fluid Significantly Reduces Costs in Completion Operation
Baroid Drill-In Fluid enables operator to save three days of rig time
Summary Summary Clay-Free DRIL-N® Fluid Helps Prevent Instability, Formation Damage on Depleted Deepwater Injector
Reservoir drilling fluid enables operator to reach target zone ahead of plan
Summary Summary ENCORE® NAF System Drills Deep Depleted Sand with Zero Losses in Deepwater GOM
A known depleted zone was causing severe lost circulation on deepwater wells in this field.
Summary Summary Clay-Free INNOVERT® IEF Eliminates Instability in Buildup Section, Saves 94 Hours and $470K
A highly reactive shale caused wellbore instability in the buildup section of the directional wells. Significant nonproductive time (NPT) was attributed to the need for frequent wellbore conditioning trips and stuck pipe incidents. The wells were being drilled with a conventional invert emulsion fluid (IEF) system with oil/water ratios (OWR) of 80/20 or higher.
Summary Summary BaraShale™ Lite Fluid Enables Sustained Success of Unconventionals in Low-Cost Oil Environment
To sustain operations in the Permian Basin against the low-cost oil environment, operators needed to achieve superior borehole integrity and annular isolation, and to reduce drilling time and waste disposal costs.
Summary Summary Inhibitive HYDRO-GUARD® HPWBM Delivers Trouble-Free Gauge Hole, Zero Cuttings Handling Costs
Baroid Solution saves operator several days of rig time
Summary Summary EZ-PLUG® LCM Pill Optimized with DFG™ Modeling Stops Loss in High-Perm Sands, Saving 72 Hours of Rig Time
The operator wanted to avoid losses in a series of high-permeability sands that had severe lost circulation issues in previous wells. Costs on these wells had escalated due to days lost battling the losses, and to the replacement of mud volumes
Summary Summary Optimized CARBONOX® WBM Weighted Up to 2.55 sg (21.3 lb/gal) for High-Pressure Exploration Well
An operator in Argentina’s Parva Negra field planned to re-enter and deepen an extended-reach well that had been temporarily abandoned in 2015. A high-density drilling fluid would be needed to maintain well control. The ability to control equivalent circulating density (ECD) and optimize rheological properties would be critical to the success of this exploratory well operation.
Summary Summary BaraClear™ Twin Filter Press Installation Significantly Reduces Costs on Gravel-Pack Completion
Cost-Efficient System improves operations enabling savings of USD 124K
Summary Summary BaraPhase™ Thermomechanical Cuttings Cleaner Recovers Significant Base Oil for Reuse
The operator needed to meet three objectives while drilling with NAF: » Prevent contamination » Recover base oil for reuse » Reduce OOC to less than 1 percent
Summary Summary ENVIROMUL™ HT Drilling Fluid and WellSET® Treatment Prevent Losses in HPHT Reservoir with Depleted Zone
The HPHT reservoir contained a depleted zone that posed a high risk of severe lost circulation.
Summary Summary Combo Systems Optimize Drilling and Completion Phases of Reservoir Interval
An operator in the U.K. was using a competitor’s breaker system for well completions, resulting in an average formation-damage skin factor of 5.5. The operator challenged Baroid for a better solution to minimize the formation damage and differential sticking potential in a 2,100-foot (640-meter) length of an 8.5- inch x 9.5-inch horizontal section while maintaining the equivalent circulating density (ECD) within a 13.5-lb/gal.
Summary Summary BaraShield®-663 LCM Standard Field Application Procedure
Standard Field Application Procedure
Summary Summary DUO-SQUEEZE® H Operating Procedures
Recommended operating procedures for DUO-SQUEEZE H lost circulation material
Summary Summary HYDRO-PLUG® LCM Standard Field Application Procedure
Standard Field Application Procedure
Summary Summary STOPPIT® LCM Standard Field Application Procedure
Standard Field Application Procedure
Summary Summary BaraShield®-664 LCM Standard Field Application Procedure
Standard Field Application Procedure
Summary Summary BaraBlend®-665 LCM Standard Field Application Procedure
BaraBlend™-665 LCM Standard Field Application Procedure
Summary Summary Lost Circulation Flyer
Lost Circulation Flyer
Summary Summary Worldwide Baroid Laboratories
Worldwide Baroid Laboratories Brochure
Summary Summary Baroid Separation Solutions
Separation solutions from Halliburton Baroid provide operators with a wide range of high-value services designed to maximize fluid performance and minimize environmental impact while providing measurable reductions in operational expenses.
Summary Summary A drilling fluid from Halliburton’s Baroid business combines new emulsion chemistries with polymers to extend the operating environment of a drilling fluid for high-pressure, high-temperature conditions.
Baroid introduced BaraECD in 2012 for use in narrow margin drilling operations in the Gulf of Mexico.
Summary Summary Baroid Webinar Series
The Baroid Webinar Series keeps you up to date on the chemical and mechanical solutions that optimize fluid performance at every stage
Summary Summary BaraPhase™ Thermomechanical Cuttings Cleaner (TCC) - Sales Data Sheet
Halliburton Baroid’s BaraPhase™ thermomechanical Cuttings Cleaner (TCC) unit is specially designed for the processing of oil contaminated drilling waste such as typical drill cuttings, slop-mud and spent drilling mud.
Summary Summary BaraShield®-663 - Sales Data Sheet
Halliburton Baroid’s BaraShield -663 lost circulation material (LCM) is an innovative, engineered solution to effectively help prevent lost circulation by sealing fractures up to at least 500 microns in size in porous formations.
Summary Summary Mobile Vertical Cuttings Dryer & Centrifuge Unit - Sales Data Sheet
Baroid’s Mobile Vertical Cuttings Dryer (VCD) and Centrifuge unit is a high capacity, basket centrifuge designed for continuous feed and efficient throughput necessary for real time oil-based drilling operations.
Summary Summary N-FLOW™ Delayed Reaction Filter Cake Breaker Systems - Sales Data Sheet - A4
Baroid’s N-FLOW™ Filter Cake Breakers offer the advantage of delayed breaker action for all types of completion operations. The action of N FLOW breaker systems can be retarded for several hours, depending on downhole temperatures and breaker formulations.
Summary Summary HYDRO-PLUG® Engineered, Composite Lost Circulation Material - Sales Data Sheet
Sales Data Sheet for HYDRO-PLUG® lost circulation material (LCM) is an engineered, composite solution that is designed to be applied as a hesitation squeeze to mitigate partial to severe drilling fluid loss rates in any non-reservoir formation.
Summary Summary Vertical Cuttings Dryer and Centrifuge - Sales Data Sheet
The Baroid V-133 Cuttings Dryer has been proven to provide a dramatic reduction in drill solids waste discharge and to help maximize the recovery of synthetic-, oil-, or ester-based drilling fluids.
Summary Summary Mix on the Fly - Sales Data Sheet
Halliburton’s Mix on the Fly technology is used to combine different types of fluids into a single, homogenous fluid stream with specific properties to be used during the riserless drilling of deepwater wells.
Summary Summary DUO-SQUEEZE® H Engineered, Composite Lost Circulation Material - Sales Data Sheet
Sales Data Sheet for DUO-SQUEEZE® H lost circulation material is an “engineered, composite” solution designed to mitigate partial drilling fluid loss rates (< 50 barrels per hour; < 8 cubic meters per hour).
Summary Summary Baroid V-133 and Baroid V-71 Cuttings Dryers - Sales Data Sheet
2.4MB The Baroid V-133 Cuttings Dryer has been proven to provide a dramatic reduction in drill solids waste discharge and to help maximize the recovery of synthetic-, oil-, or ester-based drilling fluids.