Selective profiles and lock systems for standard and heavy weight tubing
Talk to an expertHalliburton Otis X® and R® landing nipples are selective by running tool and are run in the well on the completion tubing to provide a specific landing location for subsurface flow control equipment. These landing nipples feature common internal profiles. Otis X landing nipples are designed for use in standard weight tubing and R landing nipples are typically used with heavyweight tubing.
The completion can include as many selective nipples with the same ID in any sequence as desired in the tubing string. This versatility results in an unlimited number of positions for setting and locking subsurface flow controls. The flow control, which is attached to the required lock mandrel, is run in the well via the selective running tool on slickline.
The slickline operator using the selective running tool can set the flow control in any one of the landing nipples at the desired depth. If this location is unsatisfactory or if well conditions change, the flow control may be moved up or down the tubing string to another nipple location. These operations can be done by slickline under pressure without killing the well.
No-go landing nipples designed for use in standard and heavyweight tubing.
Landing nipple and lock mandrel systems well-suited for high-pressure, high-volume large bore completions.
V0-qualified, high-pressure plugs designed for use in extreme temperature and pressure environments
The SRP plug system is designed primarily for use in horizontal subsea trees
