Conformance/Water Control

Halliburton has developed a number of technologies to help reduce unwanted water production, enhance recovery efficiency, and satisfy a broad range of reservoir management and environmental objectives. Although water management may not result in increased production, application of the technologies can often improve an operator’s profitability by helping achieve a longer productive well life, reduced lifting costs and reduced environmental concerns and costs.

H2 Zero® Service
Organically crosslinked polymer system for water and gas shutoff.
EquiSeal™ Conformance Service
Custom water and gas shutoff system for horizontal or highly deviated wellbores.
MOC/One™ System
The MOC/One system is a hydrocarbon-based micro-matrix cement slurry for selective water shutoff.
BackStop™ Water Conformance Control Service
BackStop™ Water Conformance Control Service controls unwelcome water production by introducing an exceptionally capable water control agent at the shallow part of the formation around perforation tunnels.
QuikLook® Reservoir Simulation Service
QuikLook® Reservoir Simulation Service is Developed to optimize the design and placement of unwanted fluid shutoff treatments allowing data to be interpreted with unprecedented speed and accuracy.
CW-Frac℠ Water Control Service
CW-FracSM Water Control Service is Next-generation technology for helping control water incursion when fracturing near a water zone
CrystalSeal® Water Conformance Control Service
CrystalSeal® Water Conformance Control Service Treats injection Wells to Provide Improved Sweep Efficiency and Economics by Preventing or Remediating Direct Communication with Producing Wells
Thermatek® Fluids
A new generation of chemical treatments used to provide engineered solutions when drilling or producing fractured, unconsolidated or watered out formations.
WaterWeb® Water Control
WaterWeb® Water Control Uses unique polymer chemistry to help create oil-water separation in the reservoir, impeding water flow and enhancing hydrocarbon flow to the wellbore.

Water Management

Filter By  
Количество записей на странице Show     results per page
  TitleНазвание  DateДата
Summary Summary Operator nearly doubled initial well injectivity with proven fluidic oscillator technology
Boots & Coots provided innovative process and comparison for optimizing matrix treatment effectiveness
Summary Summary EquiSeal Conformance Service
Designed to help control unwanted fluid production in horizontal or highly deviated wellbores.
Summary Summary EquiSeal™ Conformance Service
CUSTOM WATER AND GAS SHUTOFF SYSTEM FOR HORIZONTAL OR HIGHLY DEVIATED WELLBORES
Summary Summary HZ-20™ Crosslinker
HZ-20™ crosslinker is a colorless to slightly yellow liquid component of the H2Zero® gel sealant system.
Summary Summary Perm D™ Conformance Additive
Perm D™ conformance additive is an azo compound that acts as the high-temperature initiator in PermSeal™ and PermTrol™ service treatments, both of which are in-situ polymerized gelation systems that reduce permeability to water.
Summary Summary Perm C™ Conformance Additive
Perm C™ conformance additive is an azo compound that acts as the low-temperature initiator in PermSeal™ and PermTrol™ service treatments, both of which are in-situ polymerized gelation systems that reduce permeability to water.
Summary Summary Perm A™ Conformance Additive
Perm A™ conformance additive is the monomer in PermSeal™ and PermTrol™ services, both of which are insitu polymerized gelation systems that reduce permeability to water.
Summary Summary MA-22™
MA-22™ polymer is a conformance tool used for water control in well stimulation.
Summary Summary Perm E™ Conformance Additive
Perm E™ conformance additive is an azo compound that acts as the mid-temperature initiator in PermSeal™ and PermTrol™ service treatments, both of which are in-situ polymerized gelation systems that reduce permeability to water.
Summary Summary WOR-Con®-W2 Polymer
WOR-Con®-W2 polymer is the active polymer in WOR-Con® service. It reacts with rock surfaces, decreasing the formation’s relative permeability to water.
Summary Summary Thermatek RSP Rapid Set Plug
Animation
Summary Summary Thermatek Zonal Isolation Material
Animation
Summary Summary Manufacturing Approach to Fracturing Limits
In the Rocky Mountains in Wyoming, a manufacturing approach is being developed to enable fracture stimulation of hundreds of gas wells from one semipermanent location that can operate around the clock.
Summary Summary MOC/One ™ Slurry for Selective Water Control
MOC/One™ slurry uses Halliburton’s unique MicroMatrix® ultrafine cement mixed with a hydrocarbon carrier fluid. The slurry is designed to selectively shut off water flowing into a wellbore.
Summary Summary BioVert NWB Diverter for Near-Wellbore Applications
Manage Fluid Placement for Fracturing, Acidizing, Sand Control and Water Control Treatments
Summary Summary Conformance Portfolio
Expert Solutions for Water Source Problems
Summary Summary DeepQuest HT Fracturing Service for HPHT Reservoirs
DeepQuestSM HT service enables fracture stimulation of high pressure and high temperature reservoirs without exceeding the safety limits of surface treating equipment and wellbore tubulars.
Summary Summary The PermSeal System
The Halliburton PermSeal® family of well conformance products has been designed specifically to help reduce production expenses and help re-establish well productivity.
Summary Summary Thermatek™ service
Thermatek™ rigid setting fluids are a new generation of chemical treatments used to provide engineered solutions for a wide range of problems encountered when drilling or producing fractured, unconsolidated or watered out formations. These fluids are the basis of Thermatek(SM) service. This new service is also an ideal solution for plugging or temporarily isolating specific zones.
Summary Summary WaterWeb Service
Halliburton's new WaterWeb service uses unique polymer chemistry to help create oil-water separation in the reservoir, impeding water flow and enhancing hydrocarbon flow to the wellbore.With the WaterWeb service, the resulting improved oil/gas recovery potential stems from a reduced water column giving improved natural lift for the residual oil and/or gas. In addition, it helps justify prolonged and sustained production by enhancing reservoir drainage.
Summary Summary H2Zero™ Service
Halliburton’s H2Zero™ service uses a revolutionary polymer
Summary Summary HydroChek® Service Eliminates Water Production, Adds Approximately $80 Million in Value (Case History) Sign in required
An operator had enjoyed significant success using Halliburton HydroChek® service to reduce water production in an offshore well. Now, that operator wanted to use that technology to restore production in a 2,845 foot well on the same platform that had been shut in because of water entering through a channel behind the pipe. 
Summary Summary SeaWave Offshore Water Treatment Service
Halliburton’s SeaWave service offers a versatile solution for effective and consistent processing of water for discharge for offshore completions and production.
Summary Summary Conformance/Water Control
Halliburton’s water management technology applies processes to reservoirs and boreholes to reduce water production
Summary Summary H2 Zero® Service
Organically crosslinked polymer system for water and gas shutoff.
Summary Summary EquiSeal™ Conformance Service
Custom water and gas shutoff system for horizontal or highly deviated wellbores.
Summary Summary MOC/One™ System
The MOC/One system is a hydrocarbon-based micro-matrix cement slurry for selective water shutoff.
Summary Summary BackStop™ Water Conformance Control Service
BackStop™ Water Conformance Control Service controls unwelcome water production by introducing an exceptionally capable water control agent at the shallow part of the formation around perforation tunnels.
Summary Summary QuikLook® Reservoir Simulation Service
QuikLook® Reservoir Simulation Service is Developed to optimize the design and placement of unwanted fluid shutoff treatments allowing data to be interpreted with unprecedented speed and accuracy.
Summary Summary CW-Frac℠ Water Control Service
CW-FracSM Water Control Service is Next-generation technology for helping control water incursion when fracturing near a water zone
Summary Summary CrystalSeal® Water Conformance Control Service
CrystalSeal® Water Conformance Control Service Treats injection Wells to Provide Improved Sweep Efficiency and Economics by Preventing or Remediating Direct Communication with Producing Wells
Summary Summary Thermatek® Fluids
A new generation of chemical treatments used to provide engineered solutions when drilling or producing fractured, unconsolidated or watered out formations.
Summary Summary WaterWeb® Water Control
WaterWeb® Water Control Uses unique polymer chemistry to help create oil-water separation in the reservoir, impeding water flow and enhancing hydrocarbon flow to the wellbore.
Summary Summary Water Management - Products
Whether the intent is to completely shut off a water producing zone or to reduce the water production while improving hydrocarbon production from the same zone, Halliburton technologies and experience are available to provide the solution.
Related Information

Related Information Дополнительная информация