Multi-Chem, a Halliburton Service

Multi-Chem, a Halliburton Service, provides unparalleled technical expertise and superior local service through the cost-effective application of customized specialty oilfield chemicals for the life of your well.

But we don’t just provide oilfield chemicals; we provide an entire team of chemical consultants, singularly focused on getting you the right solution at the right time. As a Halliburton service, we can tailor an integrated approach to meet your needs from well design through production, so you get the most from your equipment and see the greatest return on your investments.

Offshore Production

In offshore production, learn where complications can arise in your production system and how Multi-Chem can address your issues – substantially increasing the producing life of the well.

Onshore Production

See where problems can arise in your production system and how Multi-Chem can bring you an innovative suite of customized solutions that can help reduce your operating costs.

Technical Papers - OnePetro

Technical Papers

Learn about the latest technology breakthroughs from one of the energy industry’s top innovators.

Technical Papers - OnePetro

Filter By  
Количество записей на странице Show     results per page
  TitleНазвание  DateДата
Summary Summary CleanStream Service—Ultraviolet Light Bacteria Control Process for Fracturing Fluid
CleanStream service, an ultraviolet (UV) light bacteria control process, uses a mobile unit capable of treating fracturing fluid at rates up to 100 bbl/min. Using the service enables Operators to significantly reduce the volume of biocides used to treat for aerobic and anaerobic (sulfate reducing) bacteria.
Summary Summary Paraffin Deposits Video
When the challenge is paraffin, the solution is Multi-Chem. Paraffin wax can be a pipeline nightmare because paraffin deposits are a leading cause of decreased production.
Summary Summary Deep Water Application
In offshore production, learn where complications can arise in your production system and how Multi-Chem can address your issues – substantially increasing the producing life of the well.
Summary Summary LDHI Video
When the challenge is hydrates, the solution is Multi-Chem's low dosage hydrate inhibitors (LDHI). Falling temperatures can cause ice-like structures containing natural gas to form from water in the flowline. Risks can increase exponentially.
Summary Summary Midstream Application
Experienced in all aspects of midstream – including gathering systems, gas processing, transmission piping, product storage, and product transportation – Multi-Chem can respond quickly to help when problems arise.
Summary Summary SAGD Application
Managing water quality issues associated with steam production can be challenging. Learn how Multi-Chem's chemicals treat these issues to help optimize operations and reach production target rates.
Summary Summary Mature Fields Application
See where problems can arise in your production system and how Multi-Chem can bring you an innovative suite of customized solutions that can help reduce your operating costs.
Summary Summary Good Bugs Vs. Bad Bugs
Control of micro-organisms during completion of hydraulically fractured wells is a significant component in successful development of a production system. Detrimental bacteria—“bad bugs”—such as sulfate-reducing bacteria (SRB) introduced into the reservoir during drilling or completion, can facilitate biogenic sulfide production, resulting in souring of production fluids and gas, iron sulfide formation and SRB-associated microbiologically influenced corrosion (MIC).
Summary Summary Flow Assurance: Chemical Inhibition of Gas Hydrates in Deepwater Production Systems
One common and potentially detrimental flow assurance challenge to offshore production is formation of gas hydrates. Hydrates can occur when light hydrocarbons and water are present at thermodynamically favorable pressure and temperature. In offshore production systems, they typically are seen in long flowlines, but also can appear anywhere in the system where gas and water are present under high pressure and low temperature.
Summary Summary Sulfide Stress Cracking - Practical Application to the Oil and Gas Industry
The phenomenon of sulfide stress cracking (SSC) can result in catastrophic failures of pressurized equipment and piping, resulting in extensive damage, injuries and possible fatalities. This paper concentrates on, and identifies, the requirements for SSC to occur and gives designers and operators practical options for the prevention of SSC in equipment operating in an aqueous H2S environment.
Summary Summary Human Interaction: The Key to Automation
When developing and implementing a specialty chemical automation system at a refinery or any other operation requiring water and process treatment, people and service need to be the cornerstones of the solution. The benefits of human interaction are far-reaching.
Summary Summary Production Chemical Applications: Using Analytical Data to Monitor and Optimize Chemical Treatments
Advancing technology has enabled the oil and gas industry to analyze and track constituents in fluid samples. However, without proper sampling, appropriate laboratory procedures, and correct interpretations of such analyses, these data could be erroneous and result in costly and unnecessary actions. Through proper analytical sampling, testing, and understanding of these results, operators can monitor and optimize chemical applications.
Summary Summary Meeting the Hydrate Challenge - Expert Viewpoint
Hydrate formation in flowlines is the number one concern for every subsea flow assurance engineer. As exploration moves into deeper and colder waters, the risk of hydrate formation becomes absolutely critical. But what are the industry’s latest techniques for managing the risk of hydrate formation? How well do they work, and what can we expect in the future?
Summary Summary Treatment Enables High-TDS Water Use as Base Fluid for Hydraulic Fracturing
The beneficial use of produced water is receiving great attention in the oil and gas industry. As oil and gas are produced, large quantities of water containing high amounts of total dissolved solids TDS) are produced in the process.
Summary Summary Microbial Solutions Treat Frac Water
Because the water used in hydraulic fracturing operations typically is not potable, it is a common source of problematic bacteria such as sulfate-reducing bacteria (SRB) and acid-producing bacteria (APB). Controlling micro-organisms during the completion of hydraulically fractured wells is a significant component in the successful development of a production system.
Summary Summary Water Technology: Understanding, Interpreting and Utilizing Water Analysis Data
The significance and importance of water to the oil and gas industry cannot be overstated. While water is often an unwanted by-product of production, water is utilized in many production scenarios and is often times the primary driver for the production of oil. This paper discusses the importance of an accurate water analysis and will discuss the practical uses of this information.
Summary Summary Eastern Hemisphere Laboratory Capabilities
Eastern Hemisphere Laboratory Capabilities
Summary Summary Stimulation Chemical Services
Multi-Chem's stimulation chemical portfolio includes a comprehensive array of both standard and custom-formulated chemicals, along with integrated fluid systems, for every well stimulation challenge
Summary Summary DeepSEAL® Solutions
Multi-Chem understands that a properly engineered and implemented chemical treatment program can contribute to significant savings in deep water/CAPEX projects. That’s why we dedicate the time and technology to help assure that every treatment will continue to flow through every umbilical, every time – no matter how long the deep water line runs.
Summary Summary Legend™ LD-6370 Clay Stabilizer
Legend™ LD-6370 clay stabilizer is a low molecular weight, low charge density, mildly cationic, hydrophobic polymer, which irreversibly adsorbs onto the anionic clay face, blocking the migration and absorption of water into the alumino-silicate interstitial layers.
Summary Summary Legend™ LD-6450 Clay Stabilizer
Legend™ LD-6450 clay stabilizer minimizes potential formation damage caused by clay swelling and fines migration. LD-6450 clay stabilizer is a low molecular weight, polymer which adsorbs onto the clay face, blocking the migration and absorption of water into the alumino-silicate interstitial layers.
Summary Summary FRACProcessSM Service
The FRACProcessSM service offered by Multi-Chem is a unique monitoring method that optimizes the functioning of friction reducers (FRs), through the precise control of the right chemical components, at the right time and the right dosage.
Summary Summary Legend™ LD-6360 Clay Stabilizer
Legend™ LD-6360 clay stabilizer is a low molecular weight, low charge density, mildly cationic, hydrophobic polymer, which irreversibly adsorbs onto the anionic clay face, blocking the migration and absorption of water into the alumino-silicate interstitial layers.
Summary Summary Legend™ LD-7800 Scale Inhibitor
Legend™ LD-7800 scale inhibitor is a water-soluble blend of acrylate polymers designed to prevent alkaline earth metal scale deposits such as calcium carbonate, calcium sulfate and barium sulfate. This product exhibits the “threshold effect” in aqueous solutions to prevent the formation of scale deposits. It is effective in a wide variety of oilfield waters and is traceable with a simple field test.
Summary Summary Legend™ LD-2775 Anionic Liquid Friction Reducer
Legend™ LD-2775 anionic liquid friction reducer (FR) is designed to help reduce pipe friction pressures generated during hydraulic fracturing treatments using fresh water, light and moderate brines.
Summary Summary Legend™ LD-7750 Scale Inhibitor
Legend™ LD-7750 is a water-based phosphonate scale inhibitor. It is designed to provide multifunctional scale inhibition over a wide temperature range and for continuous or batch treatment.
Summary Summary Legend™ LD-7805 Solid Scale Inhibitor
Legend™ LD-7805 is a solid phosphonate scale inhibitor which can be added to the hydraulic fracturing fluid during the proppant stages to prevent the formation of scale. Placement during the proppant stages allows the LD-7805 to remain in the proppant pack so that short and long term inhibition is achieved. LD-7805 will slowly release into the water phase during production, providing broad spectrum scale inhibition in the near-wellbore region and tubulars as fluid is produced to surface.
Summary Summary Legend™ LD-9360 Scale Inhibitor
Legend™ LD-9360 scale inhibitor is a water-soluble blend of acrylate polymers designed to prevent alkaline earth metal scale deposits such as calcium carbonate, calcium sulfate and barium sulfate. This product exhibits the “threshold effect” in aqueous solutions to prevent the formation of scale deposits. It is effective in a wide variety of oilfield waters and is traceable with a simple field test.
Summary Summary Legend™ LD-8225 Lubricating Beads
Legend™ LD-8225 lubricating beads are copolymer beads designed to reduce metal-on-metal friction and wear.
Summary Summary Legend™ LD-7725 Scale Inhibitor
Legend™ LD-7725 scale inhibitor is a water-soluble blend of acrylate polymers designed to prevent alkaline earth metal scale deposits such as calcium carbonate, calcium sulfate and barium sulfate.
Summary Summary SourShield™ H2S Control
SourShield H2S control is an effective and environmentally conscious treatment exclusive to Multi-Chem to eliminate sulfate reducing bacteria (SRB) which cause souring and corrosion, with a proven track record of over seven years before having to retreat the well.
Summary Summary Legend™ LD-8230 Lubricant
Legend™ LD-8230 lubricant is a synthetic surfactant suitable for use in all water based fluids for minimizing friction in metal-on-metal applications.
Summary Summary Corrosion Protection Solutions
Halliburton’s customized corrosion protection solutions from Multi-Chem provide one of the most economical ways to maintain oil and gas production at peak efficiency.
Summary Summary Legend™ LD-7205 Surfactant
Legend™ LD-7205 surfactant removes gas bubbles and kerogen gums from surfaces and fluidizes rigid interfacial water-gas and water-oil films, allowing more bubbles and droplets to squeeze through smaller pores.
Summary Summary Legend™ LD-1300 Gelling Agent
Legend™ LD-1300 gelling agent is a slurried guar polymer used for hydraulic fracturing applications. It can be used in crosslinked fluid systems, in place of, or to supplement linear gel applications, and in hybrid fracturing jobs where friction reduced water is used before a gelled fluid system.
Summary Summary RockOn® Surfactants
Custom RockOn® surfactants from Multi-Chem are designed to increase the radial penetration of frac jobs, providing access to more of the reservoir and trapped oil, resulting in higher initial production and greater ultimate recovery for life of your well.
Summary Summary Middle East/North Africa Region
In the Middle East/North Africa region, Multi-Chem, a Halliburton Service, is a full service chemical company serving specific strategic areas, or “geomarkets”, defined by unique characteristics such as reservoirs, operational, and technical challenges. This organizational structure enables our local expertise and technology teams to focus on specific reservoir challenges, backed by an operational organization that understands regional logistical and supply chain requirements.
Summary Summary Acadiana Blend Plant Brochure
To ensure safety and consistent manufacture of our products, Multi-Chem’s new blend plant incorporates PLC controlled operations using batch logic processing, and meets or exceeds all regulatory requirements and design codes including NFPA 30, Process Safety Management (OSHA CFR 29 1910.119), API 650, and others.
Summary Summary Asia Region
In the Asia region, Multi-Chem, a Halliburton Service, is a full service chemical company organized to serve five culturally-aligned “geomarkets” within 17 countries. Designed to build lasting partnerships that advance your reservoir performance, this organizational structure helps us understand the challenges you face every day, and positions us to collaborate in developing technology that will further your success.
Summary Summary Sub-Sahara Africa Region
In the Sub-Sahara Africa region, Multi-Chem, a Halliburton Service, is a full service chemical company serving many strategic areas, or “geomarkets”, defined by unique characteristics such as reservoirs, operational, and technical challenges. This organizational structure enables our local expertise and technology teams to focus on specific reservoir challenges, backed by an operational organization that understands regional, logistical, and supply chain requirements.
Summary Summary Deep Water Capabilities
The Multi-Chem deep water team provides engineered, cost-effective solutions designed to optimize deepwater production system chemical programs.
Summary Summary AcroClear® Sulfide Controller
Multi-Chem's AcroClear® acrolein-based H2S scavenger and iron sulfide dissolver consistently outperforms conventional chemical solutions, providing highly effective removal of iron sulfide in production and injection wells, and repairing near-wellbore damage caused by iron sulfide deposits and previous acid-jobs.
Summary Summary Europe Region
With more than fifty years of experience in the North and Southern North Sea, Halliburton Europe serves the European upstream oil and gas industry through its full service chemical company, Multi-Chem, a Halliburton Service. With a well-established organizational structure and infrastructure on the ground, our local expertise and technology teams can focus on developing the technologies and services required for continued development of upstream oil and gas resources, backed by an operational organization that understands regional logistical and supply chain requirements.
Summary Summary Innovative FRACProcessSM Service Customizes Chemical Dosage to Optimize Friction Reducer Performance
Friction reducers (FRs) are critical to certain unconventional well operations; in particular, slickwater hydraulic fracturing and coiled tubing stimulation applications, where chemicals are added to water to increase fluid flow. When performing a hydraulic fracturing job, operators typically make assumptions about the wellsite’s water quality through direct measurement or approximation via historical data, and then select a FR that will perform through the worst-quality water they expect to encounter.
Summary Summary Corrosion Monitoring Tools Prove Effectiveness of Chemical Application via Slip-Stream
A Canadian customer was experiencing multiple downhole corrosion failures in their field, and was concerned with the loss of production due to downtime and the cost of repairing these failures, which averaged $10,000 to $15,000 per well.
Summary Summary MultiSweet® Scavenger Treatment for H2S in Sales Oil Keeps Rail Cars Moving
A large midstream energy company in Northeast Canada region was having problems with high H2S levels at its oil terminals, where some 240 rail cars are loaded daily with sales crude that has levels of H2S varying from 5 to 80 ppm in the liquid phase.
Summary Summary Operator in the Gulf of Mexico Successfully Inhibits High Molecular Weight Paraffin
An operator in the deep water Gulf of Mexico developed a subsea gas well through a six mile pipe-in-pipe insulated flowline, and upon first production, it became clearly evident the condensate had much higher paraffin content than anticipated.
Summary Summary Operator Increases Gas Production Rate by 15% with Foamer
An operator of a mature gas field was previously applying foamer to 200 pressure-depleted sweet gas wells spread across a wide geographic area to unload liquids and maximize gas production. The incumbent chemical was an inefficient, low performing well foamer, which caused the operator to incur high injection rates, high treatment costs and high frequency well top-up.
Summary Summary Operator Prevents Paraffin Deposition in 20-mile Deep Water Subsea Tieback in GOM
The operator was concerned about paraffin buildup in one of its producing gas/condensate wells located in the Gulf of Mexico. The well was located at a water depth of approximately 2,100 ft. with a tieback to the offshore platform via a 20-mile insulated flowline.
Summary Summary Continuous Injection of DeepSure Certified LDHI Outperforms Previous Hydrate Treatment
Hydrate particle formation and deposition is a common problem in Gulf of Mexico deep water oil and gas production systems. Caused by a combination of gas, water, relatively low temperatures and high pressures, hydrate particles tend to agglomerate and deposit on pipe walls. This buildup can occur rapidly and lead to blockages, resulting in lost production and high remediation costs. Therefore, prevention is of utmost importance.
Summary Summary FAL® Service Proves Safer, More Cost-Effective Than Plunger Lifts
After this customer initially tested Multi-Chem’s FAL® (Foam Assisted Lift) service on two Marcellus Shale wells in their Central Highlands Field, they extended the FAL service trial to four additional wells. Rather than installing costly plunger lifts, the customer chose FAL service in an effort to maintain operational expense, reduce man hours invested in dangerous activity, and reclaim lost production due to the liquid loading.
Summary Summary Consecutive Treatments Enhance Biocide Efficacy During Water Flooding of Algerian Oilfield
An Algerian operator found it necessary to employ water flooding for optimal production at two of its mature oil and gas fields. The bulk injection water was comprised of a combination of saline produced water diluted with aquifer water.
Summary Summary Infrared Imaging Identifies Composition of Leak Contents, Leads to Solution
When this Operator’s Midland station experienced a leak on a production line that is primarily stagnant, Multi-Chem technical services was contacted to complete a thermal imaging study to identify the contents (gas, oil, water and solids) within the line around the area of the leak.
Summary Summary Operator Returns Plugged SWD Well to Full Production with Customized Chemical Treatment
An operator was experiencing plugging issues that kept re-occurring in its saltwater disposal (SWD) well in the mature Roseland Plantation field, along the Gulf Coast of Louisiana.
Summary Summary Squeeze Treatment Recovers Production from an Under-Producing Well
An customer experienced considerable scale formation of CaSO4 and CaCO3 downhole in one of its assets. The challenge to control the high scaling potential produced brine contributed to a loss of 10,000 BOPD across the field and resulted in the shut-in of 10 of the 70 wells.
Summary Summary Geographic Information System + MVP 2.0™ Chemical Program Management Tool Helps Operator Meet Strict Pipeline Integrity Regulations
An exploration and production company took over a Mid-Continent region pipeline asset from a previous Multi-Chem customer, unaware that encroaching urban expansion now positioned the gathering systems within high consequence areas (HCAs) where pipeline integrity is strictly regulated to protect human population and environmentally sensitive areas in the event of failure.
Summary Summary Multi-Chem Customizes Long-Term Corrosion Mitigation in High H2S Gathering System
This Canadian producer operates a gathering system that produces and transports various volumes of gas, condensate and water from a field where the challenging terrain and quality of production causes both major pipeline corrosion problems and emulsion issues at the gas treatment plant.
Summary Summary Starting Multi-Chem Scale Control Program at Completion Reduces Workover Costs
A producer in the Rocky Mountains requested a cost-effective scale inhibitor be added to the completion fluid to prevent downhole scale formation in the early stages of the well’s life.
Summary Summary Rock-on-a-Chip™ Microfluidic Device Efficiently Evaluates Relative Effects of Surfactants in the Lab
A field trial was recently conducted in the Eagle Ford Shale, across 45 wells completed with similar design criteria, minerology, and frac fluid design, to test performance of the fracturing fluid surfactant selected in our lab via a new technique—Rock-on-a-Chip™ microfluidic device. This technique allows most geometric features observed in shale formations to be recreated digitally through photolithography and etching methods onto the “fingernail-sized” device, for the purpose of investigating fracturing fluid invasion, flowback and hydrocarbon recovery during well stimulation.
Summary Summary Multi-Chem Delivers Superior Local Service with MultiSweet® H2S Scavenging and NGL Conditioning
H2S levels rose as high as 450 ppm and the operator was unable to sell the gas to the pipeline company, which has a stringent spec limit of up to 4 ppm of H2S in the gas stream.
Summary Summary Unique Matrix Treatment Boost Production 26 Percent in Mature Asset in Latin America Region
In mature oilfields, production can decline as fields are affected by the presence of water, resulting in increased production costs. This was the case of Mexico’s Cantarell field, an aging offshore field in the Bay of Campeche.
Summary Summary SeaWave Service Chemical-Free Water Treatment Enables Safe Discharge in Strictly Regulated Offshore Environment
In offshore wells, Southern Brazil, where environmental regulations are among the strictest and rig costs among the highest in the world, one Major Operator is using the SeaWave service from Multi-Chem, a Halliburton Service, to successfully treat flowback and production water for safe and compliant discharge from a number of platforms.
Summary Summary Combination Multi-Chem Biocide System Used to Cost-Effectively Save 650,000 Gallons of Water for Re-Use
An operator located in Wheeler, Texas encountered a sudden, emergency bridge plug leak, forcing them to postpone an imminent fracturing treatment for one month during repairs. This unforeseen delay meant that the ready-to-go frac water would be left standing for approximately 30 days in 31 frac tanks on location.
Summary Summary Multi-Chem Thermal Imaging Leads to Effective Treatment for Paraffin Buildup
The terminus of the Lynch system line into the Hobbs Station has an approximately 3-foot dead area behind the booster pump injection for the line, where lack of routine flow increases the likelihood of paraffin and asphaltene solids deposition and subsequent corrosion risk from under deposit attacks.
Summary Summary Bakken Operator Reduces Water Injection by 76%
Multi-Chem worked with a Bakken operator to address a severe salt deposition issue. After relying on high volume fresh water continuous treatments to maintain normal production, a patented halite control product, MX 2-3875, was introduced to control salt precipitation and reduce the required fresh water volumes.
Summary Summary Unconventional Corrosion Protection Solution Includes Monitoring Assistance in ‘Problem Area’
One of the country’s largest natural gas distributors needed to clean a 20” dry-gas pipeline and protect it from corrosion without sacrificing the gas quality. When Multi-Chem was challenged to provide a solution, it was determined that any treatment would require oil soluble chemicals in order to maintain dry-gas specs and still be effective.
Summary Summary Multi-Chem Identifies Cost-Effective Solvent Solutions for More Efficient Line Pigging
After a cleaning of 1.78 miles of 6” pipe produced a 7-foot paraffin plug at the end of the line, this Midland operator asked Multi-Chem to conduct a solvency test to find a solvent product that would decrease the amount of soluble paraffin solids in the line to improve pigging efficiency.
Summary Summary Legend™ LD-7795 Solid Scale Inhibitor
Legend™ LD-7795 is a solid phosphonate scale inhibitor which can be added to the hydraulic fracturing fluid during the proppant stages to prevent the formation of scale.
Summary Summary AcroCide Biocide
AcroCide biocide is highly effective in controlling micro-organisms in water used in frac jobs and production systems.
Summary Summary Scale Control Solutions
Multi-Chem's customized scale control solutions help protect production equipment from damaging mineral deposits, maintaining asset integrity and enhancing production over the entire life cycle of the well.
Summary Summary Legend™ LD-7350 Surfactant
Legend™ LD-7350 surfactant is used in hydraulic fracturing fluids. It is used as a non-emulsifier and wettabillity aid for improving flowback. LD-7350 surfactant is a green non-emulsifier which does not contain BTEX contaminants, 2-butoxyethanol (2-BE), or nonylphenol ethoxylates (NPEs).
Summary Summary Legend™ LD-3225 Crosslinker
Legend™ LD-3225 crosslinker is a concentrated solution of a non-delayed crosslinker. It was designed specifically for instant borate fluid systems, but it also helps control the crosslink times of delayed borate fluid systems.
Summary Summary Legend™ LD-2725 Anionic Liquid Friction Reducer
Legend™ LD-2725 anionic liquid friction reducer (FR) is designed to help reduce pipe friction pressures generated during hydraulic fracturing treatments using fresh water and moderate brines.
Summary Summary Legend™ LD-2875 Cationic Liquid Friction Reducer
Legend™ LD-2875 cationic liquid friction reducer (FR) is designed to help reduce pipe friction pressures generated during hydraulic fracturing treatments using fresh water and moderate brines.
Summary Summary Legend™ LD-5100 Buffering Agent
Legend™ LD-5100 buffering agent is used in various polymer (guar, hydroxypropyl guar, carboxymethylhydroxy guar) fluids for hydration.
Summary Summary Legend™ Delayed Borate-Crosslinked Fracturing Fluid System (G2000)
Breakthrough fluids provide versatile and dependable performance for bottomhole temperatures 100°F TO 300°F.
Summary Summary Legend™ LD-3425 Crosslinker
Legend™ LD-3425 crosslinker is a concentrated solution of borate crosslinking agent along with an incorporated pH component to provide instant crosslinking of guar-based polymer. It is the primary crosslinking agent in the Legend G3000 fracturing fluid.
Summary Summary Legend™ Borate-Crosslinked Fracturing Fluid System (G1000)
Borate fluid systems deliver high viscosity with low gel concentrations for bottomhole temperatures 70°F to 200°F.
Summary Summary Legend™ LD-2250, LD-2350, and LD-2450 Salt Tolerant Friction Reducer Systems
Custom solutions enable use of flowback and produced water in hydraulic fracturing, with no need to dilute.
Summary Summary Legend™ LD-3525 Crosslinker
Legend™ LD-3525 crosslinker is a hydrocarbon-based slurry that is used as the crosslinker/buffer component in Legend G series fluids.
Summary Summary Legend™ LD-2975 Anionic Liquid Friction Reducer
Legend™ LD-2975 anionic liquid friction reducer (FR) is designed to help reduce pipe friction pressures generated during hydraulic fracturing treatments using fresh water and moderate brines.
Summary Summary Legend™ LD-4575 Delayed Release Breaker
Legend™ LD-4575 is one of the larger-volume delayed-release breakers used successfully in the field. To ensure continuity of delayed release breaker supply for field operations, a second supplier of encapsulated persulfate breaker was qualified.
Summary Summary Legend™ LD-7735 Scale Inhibitor
Legend™ LD-7735 scale inhibitor is designed for continuous or batch treatment. The amount used and the effectiveness in the system depends on the composition and concentration of mineral salts in the water and key system conditions such as temperature and pH.
Summary Summary Legend™ LD-4075 Breaker
Legend™ LD-4075 is an effective breaker for guar type polymers. The reaction time of LD-4075 breaker is temperature dependent. At well temperatures below 120°F (49°C), the reaction occurs very slowly and must be catalyzed.
Summary Summary Legend™ LD-2800 Cationic Liquid Friction Reducer
Legend™ LD-2800 cationic liquid friction reducer (FR) is designed to help reduce pipe friction pressures generated during hydraulic fracturing treatments using fresh water and moderate brines.
Summary Summary Legend™ LD-2100 Anionic Liquid Friction Reducer
Legend™ LD-2100 anionic liquid friction reducer is designed to help reduce pipe friction pressures generated during hydraulic fracturing treatments using fresh water and light brines.
Summary Summary Legend™ LD-4475 Delayed-Release Breaker
Legend™ LD-4475 delayed-release breaker is a low temperature oxidizing breaker designed for use with high pH fluids at actual fluid temperatures of 125°F (52°C) or lower. The breaker can be used at higher bottomhole static temperature (BHST) if formation cool down steps are taken.
Summary Summary SeaWave Offshore Water Treatment Service
Halliburton’s SeaWave service offers a versatile solution for effective and consistent processing of water for discharge for offshore completions and production.
Summary Summary Ascend™ Surfactant Solutions
Ascend™ surfactants are multi-functional wetting agents with enhanced penetration capabilities which solubilize oil and reduce interfacial tension between oil and water, allowing for increased mobility of hydrocarbon molecules.
Summary Summary Legend™ LD-7645 and LD-7645W Surfactant
LD-7645 and LD-7645W surfactants are for use in stimulation fluids to lower the surface tension of the treating fluid. LD-7645 and LD-7645W surfactants also have shown to be an effective non-emulsifier for a variety of crude oils. These surfactants can be used in sandstone, carbonate, and shale formations.
Summary Summary Legend™ LD-2600 Anionic Liquid Friction Reducer
Legend™ LD-2600 anionic liquid friction reducer (FR) is designed to help reduce pipe friction pressures generated during hydraulic fracturing treatments using fresh water and light brines up to 15,000 mg/L TDS.
Summary Summary Legend™ LD-2850 Cationic Liquid Friction Reducer
Legend™ LD-2850 cationic liquid friction reducer (FR) is designed to help reduce pipe friction pressures generated during hydraulic fracturing treatments using fresh water, light and heavy brines.
Summary Summary Legend™ LD-2950 Cationic Liquid Friction Reducer
Legend™ LD-2950 cationic liquid friction reducer (FR) is designed to help reduce pipe friction pressures generated during hydraulic fracturing treatments using fresh water, light and heavy brines.
Summary Summary Legend™ LD-5200 pH Control
Legend™ LD-5200 pH control agent is a liquid additive that is most often used as a pH control agent for some high pH fracturing fluids, such as delayed borate fracturing fluids. LD-5200 agent is also used in other applications where an adjustment of the fluid pH to a high level is required.
Summary Summary Legend™ LD-6620 Buffering Agent
Legend™ LD-6620 buffering agents are alkaline, carbonate-based buffering additives that raise the pH of aqueous base gels. They are compatible with the liquid additive equipment usually used in semi-continuous or continuous fracturing operations.
Summary Summary Legend™ LD-1325 Gelling Agent
Legend™ LD-1325 gelling agent is a slurried guar polymer used for hydraulic fracturing applications. It can be used in crosslinked fluid systems, in place of, or to supplement linear gel applications, and in hybrid fracturing jobs where friction reduced water is used before a gelled fluid system.
Summary Summary Legend™ LD-2000 Concentrated Anionic Friction Reducer
Highly anionic concentrated liquid friction reducer delivers performance in light brines and water.
Summary Summary Legend™ LD-6250 Clay Stabilizer
Legend™ LD-6250 cationic clay stabilizer minimizes potential formation damage caused by clay swelling and fines migration.
Summary Summary Legend™ LD-2900 Anionic Liquid Friction Reducer
Legend™ LD-2900 anionic liquid friction reducer (FR) is designed to help reduce pipe friction pressures generated during hydraulic fracturing treatments using fresh water and light brines.
Summary Summary Legend™ LD-2125 Anionic Liquid Friction Reducer
Legend™ LD-2125 anionic liquid friction reducer (FR) is designed to help reduce pipe friction pressures generated during hydraulic fracturing treatments using fresh water and moderate brines.
Summary Summary Legend™ LD-3125 Crosslinker
Legend™ LD-3125 crosslinker is a water-based suspension of a borate mineral. It is one of the delayed crosslinking agents used in borate fracturing fluids.
Summary Summary Technical Service Mobile and Regional Laboratories
Utilizing fully equipped mobile test trailers and strategically located regional laboratories, Multi-Chem’s technical service teams have the capability of customizing chemicals and programs for individual customers in the field, resulting in rapid response where you need it and when you need it to ensure issues are addressed quickly.
Summary Summary Legend™ LD-2150 Cationic Liquid Friction Reducer
Legend™ LD-2150 cationic liquid friction reducer is designed to help reduce pipe friction pressures generated while pumping during hydraulic fracturing treatments. An oil-external emulsion, it is easily inverted and/or broken and dispersed in water with a minimal amount of shear.
Summary Summary Midstream Chemical Solutions
Experienced in all aspects of midstream – including gathering systems, gas processing, transmission piping, product storage, and product transportation, Multi-Chem can respond quickly to help when problems arise. Multi-Chem's pipeline treating and monitoring programs provide asset specific solutions and reporting that detail every stage in your customized program.
Summary Summary NaturaLine® Products and Solutions
Multi-Chem’s customer-specific NaturaLine® solutions can offer the operator the opportunity to use a reduced amount of chemicals and achieve the same, or greater, production results. For the community where the operations take place, this means improved environmental and safety stewardship.
Summary Summary Kazakhstan Region
In the Kazakhstan region, where mature oil fields present a tremendous variety of technical, logistical, and supply chain challenges, Multi-Chem, a Halliburton Service, is a full service chemical company, working with a strong national workforce to provide creative and innovative solutions. This well-established organizational structure enables our local expertise and technology teams to focus on specific reservoir challenges, backed by an operational organization that understands regional logistical and supply chain requirements.
Summary Summary Value Differentiators
At Multi-Chem, we strongly believe that it’s the differences in service and technical support we deliver that provide real value to you. We provide a complete portfolio of chemical solutions to meet all production challenges in oil and gas systems, but what differentiates us is the service and support we provide to your operations when you need them most. Take a look at just some of our Value Differentiators and see which ones can provide meaningful benefits to your project.
Summary Summary Foam Assisted Lift (FAL)
Multi-Chem’s Foam Assisted Lift (FAL) solutions help maintain the critical velocity needed to carry liquids to the surface in producing wells where production pressures are not high enough to remove produced fluids from the well.
Summary Summary High Pressure Treating Pump Truck
Multi-Chem’s High Pressure Treating Pump Truck provides powerful and versatile pump capacity for chemical treatments and overflush into high pressure systems. This best in class tanker trailer can pump as much as 105 barrels of fluid, at pressures over 8500 psi, and treats high pressure wells and pipelines up to 15,000 psi.
Summary Summary $/BOE Incentive Pricing Program
Multi-Chem’s $/BOE Incentive Pricing Program is a “win-win,” giving Producers the opportunity to better manage total cost of a chemical treatment program and realize significant long-term savings, while incentivizing Multi-Chem to maximize performance.
Summary Summary Frac Test Services
Using accurate methods developed specifically for fracturing operations, Multi-Chem provides analytical services to help ensure the right chemicals are applied in the right dosages to help reduce operational issues and maximize hydrocarbon production over the life of the well.
Summary Summary MVP 2.0 Chemical Program Management Tool
With MVP 2.0™ chemical program management tool from Multi-Chem, you get 24/7 access to your program details, along with production information, so you can evaluate chemical treatments and monitor cost performance in near real time.
Summary Summary CleanStream® Ultraviolet Light Bacteria Control Process
CleanStream® ultraviolet light bacteria control process enhances environmental performance by reducing the volume of conventional biocides required.
Summary Summary UniStim™ Hydraulic Fracturing Fluid System
Salt tolerant, CO2 compatible, and cold temperature capable fluid system minimizes clay swelling and fines migration to enhance frac treatment.
Summary Summary Stimulation-Chemicals
To effectively increase the productivity of a well, Multi-Chem offers a broad portfolio of specialty chemicals designed to support and enhance the stimulation process.
Summary Summary Scale Control
Scale inhibitors assist with oil and gas production by maintaining asset integrity. Multi-Chem's specialty scale inhibitors work to control a wide variety of scale production challenges to help prolong the life of your well.
Summary Summary MSDS-Sheets
Material Safety Data Sheets (MSDS)
Summary Summary Midstream-Solutions
Experienced in all aspects of midstream � including gathering systems, gas processing, transmission piping, product storage, and product transportation � Multi-Chem can respond quickly to help when problems arise. The midstream group is structured to provide the personnel, chemistries and expertise you need to meet any challenge head on and overcome it.
Summary Summary Field-Testing
Field testing enables Multi-Chem to optimize the complete chemical management strategy and solutions to effectively address your problems and to help your system.
Summary Summary Customized-Product-Solutions
Every production chemical application is different from the next one. Because of this, Multi-Chem’s production experts, who understand how product selection and formulation can affect the overall cost-effectiveness of a project, carefully evaluate each application. In addition, we also develop site-specific customized products and formulations for our customers, in order to provide the most optimum chemical solution for their particular challenges.
Summary Summary Flow-Assurance-Engineering
to come...
Summary Summary Service-Solutions
At Multi-Chem, we don't just supply specialty chemicals—we provide an entire team and a comprehensive suite of services to enable solutions that help protect your investments, keep your wells and pipelines flowing, and keep your neighbors, personnel and environment safe.
Summary Summary Chemical-Inventory-Management-Sytem
Providing remote observations of tank levels, and confirmation of chemical injection rates and deliveries, Multi-Chem’s web-based Chemical Inventory Management System (CIMS) facilitates efficient scheduling, optimizing your treatment program, and reducing the total man-hours required to perform routine chemical inventory and pump integrity tasks, as well as reducing drive time and “hot shot” deliveries.
Summary Summary Certified-Acrolein-Technical-Specialists
As a further commitment to safety and expertise, our acrolein-based product, AcroClear®, is only handled by Multi-Chem personnel. We select specific employees from each region to become Certified AcroClear Technical Specialists (CATS), based upon their technical expertise, conscientiousness, and exemplary safety record.
Summary Summary Injection-Optimization
Getting the exact amount of oil and gas chemicals you need is crucial. If your injection rates are not optimized for your specific needs, you can unintentionally introduce bacteria, scaling, and corrosion—lowering your initial production and reducing your ROI.
Summary Summary System-Modeling-and-Engineering
Multi-Chem continues to invest in the latest industry testing equipment and procedures while evaluating the evolving needs of oil and gas production. We focus on bringing in industry leaders in flow assurance engineering to utilize various third-party programs.
Summary Summary Pre-Frac-Post-Frac-Testing
As a true partner in the field, Multi-Chem performs pre- and post-frac testing and analysis to clearly determine what chemicals are needed, proportions, and what application will be most effective. When the frac job is completed, our chemical consultants continue to evaluate your well with additional testing and precise programs to maintain the life of the well.
Summary Summary Mobile-and-Regional-Labs
When a fast turnaround time on an analysis is essential to the client, or an on-site survey is necessary to review or re-evaluate a specialty chemical treatment, Multi-Chem’s Mobile Labs are able to provide the technical services, tests and real-time information on-site/on-demand to ensure that everything is working the way it should.
Summary Summary Legend™ Stimulation Fluid Chemicals
The Legend™ stimulation chemical portfolio includes a comprehensive array of both standard and custom-formulated chemicals, along with integrated fluids systems, for every well stimulation challenge.
Summary Summary Surfactants
Through the strategic use of the Multi-Chem line of surfactants (wetting agents), you can reduce surface tension and remove formation minerals that are �trapped� in your fracture face, making it easier to recover produced fluids and extract oil or gas.
Summary Summary Solvents
Multi-Chem offers paraffin treatments, such as crystal modifier type inhibitors, dispersants and solvents, to help control deposition thus keeping your production running smoothly.
Summary Summary Wax-Inhibitors
Multi-Chem offers paraffin treatments, such as crystal modifier type inhibitors, dispersants and solvents, to help control deposition thus keeping your production running smoothly.
Summary Summary Wax-Deposits
As temperatures decrease in your production system, there is the potential for higher carbon chain paraffins to precipitate out of solution, forming deposits on the surfaces of your pipe and equipment. As this occurs, you may experience a number of production problems, such as blocked pore spaces and perforations, plugged tubing, downhole pump failures, or blocked valves � all leading up to the possible loss of oil and gas production.
Summary Summary Scale-Inhibitors
Scale inhibitors assist with oil and gas production by maintaining asset integrity. Multi-Chem's specialty scale inhibitors work to control a wide variety of scale production challenges to help prolong the life of your well.
Summary Summary Wax-Inhibitors
Multi-Chem offers paraffin treatments, such as crystal modifier type inhibitors, dispersants and solvents, to help control deposition thus keeping your production running smoothly.
Summary Summary Water-Clarifiers
Multi-Chem offers a series of water clarifiers, filtration aids, and chelates designed to work under various production conditions, allowing you to safely and effectively clear your oil and gas production water.
Summary Summary Wax-Deposits
to come...
Summary Summary NaturaLine® Products and Solutions
Multi-Chem’s NaturaLine® solutions, including our line of carefully selected environmentally conscious products, offer a unique opportunity to collaborate with customers and develop the most effective and environmentally responsible options to production challenges.
Summary Summary DeepSure℠ Certified Products
Multi-Chem understands that a properly engineered and implemented chemical treatment program can contribute to significant savings in deepwater/CAPEX projects. That’s why we dedicate the time and technology to assure that every treatment will continue to flow through every umbilical, every time – no matter how long the deepwater line runs.
Summary Summary Compressor-Issues
The overall performance of your compressor in oil and gas production is a vital component of production. As gas or oil is pulled down and compressed, particulate matter can foul your system, reducing your flow and potentially push you to the limits of your surge line.
Summary Summary Scale-Deposits
Based on the changes in pressures, pH and temperature and the amount of dissolved solids in your produced water, there is an inherent risk of mineral deposits forming on the surfaces of your pipes and equipment. For example, some minerals may appear soluble downhole, but as they are brought to the surface, they can begin to produce scale, such as calcium carbonite, calcium sulfate and barium sulfate, potentially increasing your operating expenses, decreasing or stopping the flow of fluids and causing premature equipment failure and fouling.
Summary Summary Asphaltene-Tendencies
Changes in pressure and temperatures may occur throughout the production process, causing existing asphaltenes to destabilize and precipitate, forming hard black deposits (asphalt) in your pipelines. These solids can rapidly reduce production flow or produce plugs that completely block your pipeline, shutting down production.
Summary Summary Pipeline-Integrity-Challenges
Multi-Chem's experience with developing specialty chemicals for oil and gas systems, pipelines, and flowlines expands to the international market and every type of production environment imaginable. When working with Multi-Chem to protect your pipelines, you benefit from our experience, along with the complete offerings of Halliburton.
Summary Summary Off-Spec-Sales-Gas
Hydrogen sulfide is a naturally occurring gas that may be present in formations and carried in hydrocarbon streams, or can form as a result of sulfate reducing bacteria (SRB) that are present in your process system. In some cases, the presence of H2S can greatly affect the heating value of the gas, making it difficult to sell, due to strict requirements regarding the energy content of gas.
Summary Summary Failures_Leaks
In oil and gas systems, the inorganic mineral components of produced waters often become supersaturated and precipitate out-of-solution to form deposits on the inner walls of your pipeline, restricting or stopping the flow of fluids and corroding the pipe walls. As the corrosion process develops, it can generate iron solids, causing further pipeline failures and leaks, poor water quality and a significant reduction of the useful life of your asset.
Summary Summary Deepwater-Challenges
At Multi-Chem, we understand the significance of your investments in deepwater and don’t take our participation in your success lightly. As a true offshore partner, we provide continuous monitoring and analysis to clearly diagnose issues, and provide chemical solutions in the right proportions to effectively resolve your challenges.
Summary Summary Water-Quality
The quality of produced water is dependent upon a wide variety of factors, including the presence of solids that can provide surfaces for oil to adhere to, causing high oil content, iron sulfide causing the water to turn black or bacteria causing the water to sour.
Summary Summary Bacteria-Induced-Corrosion
Depending on the flow rates, fluids and bathymetry of your system, water pockets can build in your system, allowing bacteria to form that can potentially produce acids or 2S. If these contaminants begin to corrode your pipeline or dead legs, not only do you run the risk of releasing soured fluids into the environment, but you also face the possible failure of your pipelines and system.
Summary Summary Emulsion-Tendencies
When water and oil mix, there is an inherent risk of them stabilizing and forming emulsions, creating a viscous mixture in your system that increases friction loss due to the added viscosity of the fluids.
Summary Summary Mineral-Deposits
Based on the changes in pressures, pH and temperature and the amount of dissolved solids in your produced water, there is an inherent risk of mineral deposits forming on the surfaces of your pipes and your downhole and surface equipment. This can potentially increase your operating expenses, decrease or block the flow of fluids, and cause premature equipment failure, fouling and production loss.
Summary Summary Dispersants
Multi-Chem offers paraffin treatments, such as crystal modifier type inhibitors, dispersants and solvents, to help control deposition thus keeping your production running smoothly.
Summary Summary H2S-Scavengers
Multi-Chem offers a complete line of water-soluble and oil-soluble hydrogen sulfide scavengers that can be applied via continuous injection or through batch treatments.
Summary Summary bacterial-related-issues
Typically, if you find a chemical supplier onsite during production, there�s already a problem in your operation.
Summary Summary Corrosion-Inhibitors
Multi-Chem offers a variety of corrosion inhibitors, such as water- or oil-soluble, high-shear, high-temperature, and pressure-stable. Multi-Chem also certifies corrosion inhibitors for umbilical use.
Summary Summary Biocides
The Multi-Chem line of biocides and biological control technologies are formulated to control deleterious micro-organisms in water used in frac jobs and production systems, and help maintain asset integrity and mitigate potential problems, such as microbiologically induced corrosion (MIC), biomass accumulation, biogenic sulfide production, oil carryover, and polymer degradation.
Summary Summary Foam-Production-System
As gas, oil and water are extracted from the ground and separated, they can encounter contaminants present in the fluids, such as drilling mud, sand, wax crystals and asphaltene particles, which act as nucleation sites on which gas bubbles can form. Once formed, foam can greatly reduce pump capacity and efficiency, causing erratic produced fluid flow and loss of production.
Summary Summary Iron-Sulfide-Dissolvers
Multi-Chem provides a number of specialty chemicals to remove iron sulfide, all specifically designed to attack your unique production challenges in the most effective way possible. Our approach is tailored to your own system conditions and operating parameters for the best in corrosion protection.
Summary Summary Fluid-Gas-Separation
As oil, gas and water are separated to different tanks during production, there is an inherent risk of fluids intermixing and spilling into the pipeline midstream. When this happens, the potential for corrosion and the development of H2S greatly increases, which can result in equipment failure, loss of production and health and safety issues for your people and the environment.
Summary Summary High-Lease-Operating
In the gas and oil industry, any production problem or downtime can have tremendous financial ramifications on a production company. That�s why the Multi-Chem team is committed to providing an unprecedented level of service to optimize your production and to minimize your lease operation expenses (LOE), ensuring the highest level of profitability from its operations.
Summary Summary AcroClear® Sulfide Controller
AcroClear® sulfide controller consistently outperforms conventional chemical solutions, providing highly effective removal of iron sulfide in production and injection wells, and repairing near-wellbore damage caused by iron sulfide deposits and previous acid-jobs.
Summary Summary Asphaltene-Inhibitor
Multi-Chem has a wide selection of asphaltene inhibitors, dispersants and specialty chemical solutions to treat asphaltene stability related issues. These solutions provide a customized chemical application process that will help mitigate the risks related to the production of unstable asphaltenic crude. Multi-Chem�s tailored specialty chemicals will maximize the uptime and keep operations running as smoothly as possible.
Summary Summary Defoamers
Multi-Chem provides customized foamer solutions and applications that can be used in a wide variety of operating conditions, such as deepwater production, winterized environments for colder climates and high-temperature products that are stable for deep, hot gas wells.
Summary Summary Foamers
Multi-Chem provides customized foamer solutions and applications that can be used in a wide variety of operating conditions, such as deepwater production, winterized environments for colder climates and high-temperature products that are stable for deep, hot gas wells.
Summary Summary Flowline-Issues
As oil flows from the production unit to the pumping unit, temperature and pressure changes can cause wax and scale deposits to form on the pipe walls as the oil rises to the surface. Once this happens, you run the risk of diminishing the integrity of your pipe, while restricting production yields and increasing LOE�s.
Summary Summary Emulsion-Breakers
Multi-Chem offers emulsion breakers for both water-in-oil (regular) and oil-in-water (reverse) emulsions, helping you improve oil-water separations while increasing your oil and gas production rates.
Summary Summary H2S-Issues
Hydrogen sulfide is a naturally occurring gas that may be present in formations and carried in hydrocarbon streams, or can form as a result of Sulfate Reducing Bacteria (SRB) that are present in your process system. Being a highly corrosive acid gas, it drastically drives the pH of water down, causing corrosion in your pipeline and significant health and safety risks to the community.
Summary Summary Liquid-Loading
As gas wells mature, production volumes and bottom-hole pressures begin to decrease, resulting in a lower production velocity that is unable to carry the liquids to the surface. When these liquids aren�t completely removed from the well with the gas production, they can build up downhole, causing the gas to flow intermittently, lowering production and eventually killing the well.
Summary Summary High-Failure-Rates
High failure rates means loss of production and revenue, as well as added expenses and high LOE�s. All of these issues amplify the importance of identifying and understanding the root cause of any failure and to develop a treatment program that is specific to the production challenge.
Summary Summary Friction-Reducers
Multi-Chem friction reducers are developed to help with reducing friction in a wide variety of conditions, and can easily be incorporated into other chemical applications, such as oxygen scavengers, scale controllers and bactericides, increasing their overall effectiveness.
Summary Summary Tehnical Challenges
At Multi-Chem everything we offer is formulated and applied to leave as little impact on the environment as possible, while solving your unique completion challenges, improving your overall ROI, and protecting the integrity of your assets for the long-term.
Summary Summary High-Horsepower-Costs
High horsepower requirements greatly increase costs to your frac process. One of the ways that Multi-Chem can help you lower these costs and give you better horsepower efficiency is through the use of our specialty chemical friction reducers.
Summary Summary Reservoir-Souring
As reservoirs age or injection and formation waters co-mingle downhole, the introduction of sulfate-reducing bacteria (SRB) can sour the reservoir, as well as generate H2S, which can lead to corrosion in your well, and health and safety concerns for the community.
Summary Summary Source-Water-Reuse
Water is a vital and key component to every successful frac, and the manner in which it is used can have great affect on the environment. While source water may appear to be stable on the surface, when its transferred, mixed with other chemistries, or pumped under high pressures into hydrocarbon rich reservoirs, it can accumulate contaminants, such as solids, bacteria and H2S, all of which can be detrimental to your production and the environment.
Summary Summary H2S-and-Iron-Sulfide-Frac-Pits
All frac pits have the potential of bacterial contamination. Some of these sulfates and organic materials, if left untreated, can ultimately cause the development of H2S gas.Multi-Chem recognizes the severity of H2S and the pits immediate proximity to the environment and strives to alleviate the existence of contamination before it becomes apparent in source water or is introduced into a frac pit.
Summary Summary Low-Initial-Production
When fracturing, the misuse of additives can often have drastic repercussions on your system, causing low initial production, added expense and potential failure of your well.
Summary Summary Oxygen-Scavengers
Most oxygen corrosion in oilfield metallurgy is caused by the addition of fluids from the surface that have been exposed to air for any length of time. When large quantities of fluids are injected downhole—as they are in fracturing operations, saltwater disposal wells, formation squeezes, or waterflood operations—oxygen can be introduced in significant quantities.
Summary Summary RockOn® Surfactants
Custom RockOn® surfactants from Multi-Chem deliver superior results in the field—higher initial production and greater ultimate recovery for better financial returns over the life of your well. Specifically formulated based on core sample testing, each RockOn solution is custom-tailored to take into account the unique reservoir characteristics, with options to fit your specific environmental requirements.
Summary Summary Frac-Inefficiencies
Unwanted friction can be a big problem with modern machinery, and pipelines are no different. When fluid is forced to flow in a pipe, its center flows faster than its sides, thereby causing friction along the walls of the pipe.
Summary Summary Capillary-Injection-Service
Multi-Chem�s capillary injection service is a total solution for maximizing well production and protecting onshore, shelf and deepwater assets. Our CapSure solutions include a full line of products that are specifically qualified for capillary injection using the most rigorous standards in the industry today.
Summary Summary Chemical-Solutions
Deciding on an oil and gas chemical supplier can often times be difficult. At Multi-Chem, we make that decision easier for you. Safety, product design and superior local service are the only ways we know how to do business.
Summary Summary Corrosion Protection Solutions - Video
Corrosion Protection Solutions Video
Summary Summary Environmentally-Conscious-Solutions
Multi-Chem provides environmentally conscious solutions for flowback and produced water. We have been a proactive leader in the use of safer chemicals for the environment, namely our environmentally conscious, high-performing frac additives that exceed industry standards for safety, toxicity, biodegradation, and bioaccumulation.
Summary Summary Scale-Deposition
Based on the changes in pressures, pH, temperatures and the amount of dissolved solids in your produced water, there is an inherent risk of mineral deposits forming on the surfaces of your entire production system.
Summary Summary Asphaltene-Instability
In deepwater, changes in pressure and temperatures may occur, causing existing asphaltenes to destabilize and precipitate, forming hard black deposits (asphalt) that form in your system and settle in your vessels. These solids can rapidly reduce production flow downhole by creating a choke point with a higher pressure differential.
Summary Summary Corrosion-Issues
Due to the variety of acids, pH and metals in produced fluids, every oil and gas field in the world has the potential for corrosion. Corrosion may occur where water and gas are present, and can lead to production challenges.
Summary Summary Flow-Assurance-Engineering
With the immense investments and logistics necessary to operate in deepwater, it is imperative to know that everything in and around your system is working at its peak performance.
Summary Summary Multi-Chem
Deciding on an oilfield chemical supplier can often times be difficult. On the surface we might all look the same and boast similar chemistries, but when you get down to it, that's where the similarities end and the Multi-Chem difference begins.
Related Information

Related Information Дополнительная информация