Addressing the industry's most challenging well control problems 24/7
Emergency Response Services
Boots & Coots Services has the knowledge and experience to address the industry's most challenging well control problems — onshore, offshore, and subsea. Our specialists are on call 24/7 and will respond immediately to assist with assessment or mobilization of personnel and equipment. We have equipment staged strategically around the world and the logistical experience to deploy to most any country.
Prevention Services
Contingency planning can prevent well control emergencies or lessen their effects. We offer a wide array of prevention services from Well Control Contingency Plans, to insurance through the WELLSURE® program, to inspection services and more. For dealing with well control emergencies, we've built a reputation on a wealth of knowledge among our team of engineers and can bring the collective experience to challenges ranging from well blowouts to relief well implementation.
Control of Well Insurance Program
The WELLSURE® Program is a unique bundled package that includes a full range of Boots & Coots well control services, prevention services, and post-response services as part of the operator's extra-expense insurance package.
Well Control Engineering
When drilling a relief well, accurate target well interception and successful well killing operations are highly challenging. Flawless execution depends on a combination of experience, technology, and other resources. The necessary critical tasks demand high levels of competency in engineering and project management. Boots & Coots has the capabilities and the access to a comprehensive range of Halliburton services to successfully manage your relief well project.
Well Special Services
Boots & Coots has extensive global experience in hot tapping, gate valve drilling and freeze job operations in locations around the world.
Subsea Response
Boots & Coots offers a unique suite of Subsea Response services including the first truly air mobile Capping Stack, containment systems, and physics-based modeling capability.
[{"contenttype":"Case Studies","datasource":[{"title":"Boots & Coots Drills Relief Well for Shallow Target to Kill Catastrophic Blowout","description":"Multidisciplinary response resolves crisis in first attempt","path":"/content/dam/ps/public/project_management/contents/Case_Histories/boots-coots-drills-relief-well.pdf","docCreatedDate":"2016-10-24T23:30:00.000-05:00","modifiedDate":"2016-10-24T23:30:00.000-05:00","docdate":"2016-10-24T23:30:00.000-05:00","docrefNum":"H012364","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Reservoir_Challenges:High_Pressure,Environmental_Challenges:Pressure,|locations:Asia:Southeastern_Asia:Indonesia_Southeastern_Asia,|prodgroups:Pressure_Control:Well_Control,Pressure_Control:Well_Control_Engineering,"},{"title":"In 1924, Myron Kinley Kick-Starts the Well Control Industry with a Bang","description":"Most well control methods and technologies usedtoday trace their roots back to one man: Myron Kinley","path":"/content/dam/ps/public/project_management/contents/Case_Histories/myron-kinley-kick-starts-well-control.pdf","docCreatedDate":"2018-06-01T23:30:00.000-05:00","modifiedDate":"2018-07-11T23:30:00.000-05:00","docdate":"2018-06-01T23:30:00.000-05:00","docrefNum":"H012526","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Reservoir_Challenges:Mature_Fields,|locations:Global,|prodgroups:Pressure_Control:Well_Control,Project_Management,"},{"title":"Boots & Coots Regains Control of Well After Blowout Occurs During Workover Operation","description":"The Boots & Coots well control team was mobilized to the location to assess the situation and assist the operator on the response plan and operation. The team initially inspected and assessed the conditions of the barge and well. Gas was flowing into the lake bed and then to the water surface where it had caught fire.","path":"/content/dam/ps/public/project_management/contents/Case_Histories/boots-and-coots-regains-control-of-well-after-blowout.pdf","docCreatedDate":"2018-02-18T22:30:00.000-06:00","modifiedDate":"2018-03-01T22:30:00.000-06:00","docdate":"2018-02-18T22:30:00.000-06:00","docrefNum":"H012775","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Reservoir_Challenges:Mature_Fields,Well_Control_Challenges,|locations:South_America,|prodgroups:Pressure_Control:Well_Control_Engineering,Pressure_Control:Well_Control,"},{"title":"Boots & Coots Regains Control of Well After Underground Blowout and Surface Broach","description":"Suite of Logging tools helps determine detailedsource control response plan","path":"/content/dam/ps/public/project_management/contents/Case_Histories/boots-coots-regains-control-underground-blowout.pdf","docCreatedDate":"2016-11-04T23:30:00.000-05:00","modifiedDate":"2016-11-04T23:30:00.000-05:00","docdate":"2016-11-04T23:30:00.000-05:00","docrefNum":"H012379","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Well_Control_Challenges,|locations:South_America,|prodgroups:Pressure_Control:Well_Control,Pressure_Control:Well_Control_Engineering,"}]},{"contenttype":"Data Sheets","datasource":[{"title":"Well Control Readiness Audit","description":"Downtime can be easily reduced by employing the Boots & Coots Well Control Readiness Audit. The audit can be included as an integral part of the drilling rig maintenance schedule, implementing corrective action recommendations that will help to ensure the well control equipment is in proper, fully functional condition.","path":"/content/dam/ps/public/project_management/contents/Data_Sheets/web/well-control-readiness-audit-data-sheet.pdf","docCreatedDate":"2018-12-18T10:50:00.000-06:00","modifiedDate":"2018-12-18T10:52:18.564-06:00","docdate":"2018-12-18T10:50:00.000-06:00","docrefNum":"H011121","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Pressure_Control:Prevention,Pressure_Control:Well_Control,"},{"title":"Well Control Contingency Plan ","description":"The Boots & Coots Well Control Contingency Plan(WCCP) is a custom-crafted well(s) specific responseguide that is applicable to organizational levelswhich include (unless otherwise noted): InitialResponse Procedures, Surface Blowout Scenarios,Logistics, Emergency Classifications, Critical Elementswhich include: Equipment, Personnel, Suppliers,Mobilization, Safety, General Intervention Strategies,and Emergency Management Organization.","path":"/content/dam/ps/public/project_management/contents/Data_Sheets/web/H010941.pdf","docCreatedDate":"2015-01-05T22:30:00.000-06:00","modifiedDate":"2016-01-14T22:30:00.000-06:00","docdate":"2015-01-05T22:30:00.000-06:00","docrefNum":"H010941","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Well_Control_Challenges,|brandgroups:Boots_&_Coots,|locations:Global,|prodgroups:Pressure_Control:Prevention:Contingency_Planning_Services,"},{"title":"HAZID/HAZOP","description":"A hazard and operability (HAZOP) study is a design reviewtechnique used for hazard identification, and for the identification of design deficiencies which may give rise to operability problems.","path":"/content/dam/ps/public/project_management/contents/Data_Sheets/web/H011228.pdf","docCreatedDate":"2015-01-05T22:30:00.000-06:00","modifiedDate":"2016-01-14T22:30:00.000-06:00","docdate":"2015-01-05T22:30:00.000-06:00","docrefNum":"H011228","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Well_Control_Challenges,|brandgroups:Boots_&_Coots,|locations:Global,|prodgroups:Pressure_Control:Prevention:Risk_Management,"},{"title":"Drill Well On Paper","description":"Drilling the well on paper (DWOP) is the process of analyzingeach step of the well construction process to generate ideas forimproving performance and reducing cost.","path":"/content/dam/ps/public/project_management/contents/Data_Sheets/web/H011122.pdf","docCreatedDate":"2015-01-05T22:30:00.000-06:00","modifiedDate":"2016-01-14T22:30:00.000-06:00","docdate":"2015-01-05T22:30:00.000-06:00","docrefNum":"H011122","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Well_Control_Challenges,|brandgroups:Boots_&_Coots,|locations:Global,|prodgroups:Pressure_Control:Prevention:Risk_Management,"},{"title":"BowTieXP® Software","description":"Boots & Coots uses a Risk Assessment Software, a recently released system, which applies the latest concepts in risk management to the widely accepted and proven BowTie methodology.","path":"/content/dam/ps/public/project_management/contents/Data_Sheets/web/H011227.pdf","docCreatedDate":"2015-01-05T22:30:00.000-06:00","modifiedDate":"2015-01-09T22:30:00.000-06:00","docdate":"2015-01-05T22:30:00.000-06:00","docrefNum":"H011227","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Well_Control_Challenges,|brandgroups:Boots_&_Coots,|locations:Global,|prodgroups:Pressure_Control:Prevention:Risk_Management,"},{"title":"Safeguard<sup><small>SM<\/small<> Service","description":"Safeguard risk prevention service is based on API RP75.Its components can be applied at any phase of a project fromconception to completion.","path":"/content/dam/ps/public/project_management/contents/Data_Sheets/web/H011226.pdf","docCreatedDate":"2015-01-05T22:30:00.000-06:00","modifiedDate":"2016-01-14T22:30:00.000-06:00","docdate":"2015-01-05T22:30:00.000-06:00","docrefNum":"H011226","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Reservoir_Challenges:Mature_Fields,Deepwater,Well_Control_Challenges,|brandgroups:Boots_&_Coots,|locations:Global,|prodgroups:Pressure_Control:Prevention:Risk_Management,"},{"title":"Well Control Equipment Third Party Witness","description":"The Boots & Coots Wellhead Pressure Control Equipment (WPCE) Third Party Witness service provides clients with representationindependent of the Original Equipment Manufacturer (OEM) tomonitor the assembly and hydrostatic testing of new build surface pressure control equipment used in drilling, completions, or intervention.","path":"/content/dam/ps/public/project_management/contents/Data_Sheets/web/H011246.pdf","docCreatedDate":"2015-01-05T22:30:00.000-06:00","modifiedDate":"2016-01-14T22:30:00.000-06:00","docdate":"2015-01-05T22:30:00.000-06:00","docrefNum":"H011246","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Well_Control_Challenges,|brandgroups:Boots_&_Coots,|locations:Global,|prodgroups:Pressure_Control:Prevention:Risk_Management,"},{"title":"Workover-Completion Audit","description":"The Boots & Coots Workover-Completion Audit focuseson aspects of well control and provides the client with aquantitative analysis of the probability for a successful project.","path":"/content/dam/ps/public/project_management/contents/Data_Sheets/web/H011128.pdf","docCreatedDate":"2015-01-05T22:30:00.000-06:00","modifiedDate":"2016-01-14T22:30:00.000-06:00","docdate":"2015-01-05T22:30:00.000-06:00","docrefNum":"H011128","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Well_Control_Challenges,|brandgroups:Boots_&_Coots,|locations:Global,|prodgroups:Pressure_Control:Prevention:Inspection_Services,"},{"title":"Snubbing Audit","description":"The Boots & Coots Snubbing Audit focuses on aspects ofwell control and provides the client with a quantitative analysis ofthe probability for a successful project.","path":"/content/dam/ps/public/project_management/contents/Data_Sheets/web/H011125.pdf","docCreatedDate":"2015-01-05T22:30:00.000-06:00","modifiedDate":"2016-01-14T22:30:00.000-06:00","docdate":"2015-01-05T22:30:00.000-06:00","docrefNum":"H011125","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Well_Control_Challenges,|brandgroups:Boots_&_Coots,|locations:Global,|prodgroups:Pressure_Control:Prevention:Inspection_Services,"},{"title":"Flowback Audit","description":"The Boots & Coots Flowback Audit focuses on aspects ofwell control and provides the client with a quantitative analysis ofthe probability for a successful project.","path":"/content/dam/ps/public/project_management/contents/Data_Sheets/web/H011123.pdf","docCreatedDate":"2015-01-05T22:30:00.000-06:00","modifiedDate":"2016-01-14T22:30:00.000-06:00","docdate":"2015-01-05T22:30:00.000-06:00","docrefNum":"H011123","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Well_Control_Challenges,|brandgroups:Boots_&_Coots,|locations:Global,|prodgroups:Pressure_Control:Prevention:Inspection_Services,"},{"title":"Wellhead Audit","description":"The Boots & Coots Wellhead Audit focuses on aspects ofwell control and provides the client with a quantitative analysis ofthe probability for a successful project.","path":"/content/dam/ps/public/project_management/contents/Data_Sheets/web/H011126.pdf","docCreatedDate":"2015-01-05T22:30:00.000-06:00","modifiedDate":"2016-01-14T22:30:00.000-06:00","docdate":"2015-01-05T22:30:00.000-06:00","docrefNum":"H011126","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Well_Control_Challenges,|brandgroups:Boots_&_Coots,|locations:Global,|prodgroups:Pressure_Control:Prevention:Inspection_Services,"},{"title":"Wireline Audit","description":"The Boots & Coots Wireline Audit focuses on aspects ofwell control and provides the client with a quantitative analysis ofthe probability for a successful project.","path":"/content/dam/ps/public/project_management/contents/Data_Sheets/web/H011127.pdf","docCreatedDate":"2015-01-05T22:30:00.000-06:00","modifiedDate":"2016-01-14T22:30:00.000-06:00","docdate":"2015-01-05T22:30:00.000-06:00","docrefNum":"H011127","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Well_Control_Challenges,|brandgroups:Boots_&_Coots,|locations:Global,|prodgroups:Pressure_Control:Prevention:Inspection_Services,"},{"title":"Jack-Up Audit","description":"The Boots & Coots Jack-Up Audit focuses on aspects of wellcontrol and provides the client with a quantitative analysis of theprobability for a successful project.","path":"/content/dam/ps/public/project_management/contents/Data_Sheets/web/H011124.pdf","docCreatedDate":"2015-01-05T22:30:00.000-06:00","modifiedDate":"2016-01-14T22:30:00.000-06:00","docdate":"2015-01-05T22:30:00.000-06:00","docrefNum":"H011124","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Well_Control_Challenges,|brandgroups:Boots_&_Coots,|locations:Global,|prodgroups:Pressure_Control:Prevention:Inspection_Services,"},{"title":"Deepwater Audit","description":"Audits are defined as a structured process of collectingindependent information on the efficiency, effectiveness andreliability of the total system and developing plans for correctiveaction. The Boots & Coots Deepwater Audit focuses on aspects ofwell control and provides the client with a quantitative analysis ofthe probability for a successful project. Drawing upon our in-houseexpertise and a causal analysis of countless Boots & Coots casestudies, we are able to determine common issues associated withwell control related failures during drilling operations.","path":"/content/dam/ps/public/project_management/contents/Data_Sheets/web/H011120.pdf","docCreatedDate":"2015-01-05T22:30:00.000-06:00","modifiedDate":"2016-01-14T22:30:00.000-06:00","docdate":"2015-01-05T22:30:00.000-06:00","docrefNum":"H011120","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Well_Control_Challenges,|brandgroups:Boots_&_Coots,|locations:Global,|prodgroups:Pressure_Control:Prevention:Inspection_Services,"},{"title":"WellCall® Mobile Application","description":"Smart phone application (app) enables easy access to Boots & Coots emergency dispatch and asite specific Well Control Contingency Plan.","path":"/content/dam/ps/public/project_management/contents/Data_Sheets/web/H010319.pdf","docCreatedDate":"2015-01-05T22:30:00.000-06:00","modifiedDate":"2016-01-14T22:30:00.000-06:00","docdate":"2015-01-05T22:30:00.000-06:00","docrefNum":"H010319","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Well_Control_Challenges,|brandgroups:Boots_&_Coots,|locations:Global,|prodgroups:Pressure_Control:Prevention,"},{"title":"Emergency Response Training / Incident Command System","description":"This course discusses the\nimportance of emergency response, how to manage it, and the necessary equipment that is needed to control and mitigate events as they occur.","path":"/content/dam/ps/public/project_management/contents/Data_Sheets/web/H010958.pdf","docCreatedDate":"2015-01-05T22:30:00.000-06:00","modifiedDate":"2015-01-09T22:30:00.000-06:00","docdate":"2015-01-05T22:30:00.000-06:00","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Well_Control_Challenges,|brandgroups:Boots_&_Coots,|locations:Global,|prodgroups:Pressure_Control:Prevention,"},{"title":"Frac Audit","description":"The Boots & Coots frac audit focuses on aspects of well control and provides the client with a quantitative analysis of the probability for a successful project.","path":"/content/dam/ps/public/project_management/contents/Data_Sheets/web/frac-audit-data-sheet.pdf","docCreatedDate":"2017-03-01T22:30:00.000-06:00","modifiedDate":"2017-06-30T23:30:00.000-05:00","docdate":"2017-03-01T22:30:00.000-06:00","docrefNum":"H012534","languageSet":["English"],"accessType":"P","dataSearch":"brandgroups:Boots_&_Coots,|locations:Global,|prodgroups:Pressure_Control:Prevention,"},{"title":"Global Rapid Intervention Package (GRIP<sup><small>SM<\/sup><\/small>)","description":"The Global Rapid Intervention Package (GRIPSM) suite of services features the15,000-psi RapidCap™ air-mobile capping stack, which, owing to its unique gatevalve-based design, is significantly lighter and more mobile than conventional rambasedsystems, thus eliminating the need for installing large subsea accumulatormodules.","path":"/content/dam/ps/public/project_management/contents/Data_Sheets/web/global-rapid-intervention-package.pdf","docCreatedDate":"2019-09-30T22:30:00.000-05:00","modifiedDate":"2018-03-01T22:30:00.000-06:00","docdate":"2019-09-30T22:30:00.000-05:00","docrefNum":"H012838","languageSet":["English"],"accessType":"P","dataSearch":"locations:Global,|prodgroups:Pressure_Control:Well_Control,"},{"title":"Dispersion Modeling and Radiant Heat Analysis","description":"Dispersion modeling andradiant heat analysis assists inthe determination of exclusion zones around the well site. The modeling and analysis are critical parts of well control planning for both surface intervention and relief well planning and execution.","path":"/content/dam/ps/public/project_management/contents/Data_Sheets/web/H011250.pdf","docCreatedDate":"2015-01-05T22:30:00.000-06:00","modifiedDate":"2016-01-14T22:30:00.000-06:00","docdate":"2015-01-05T22:30:00.000-06:00","docrefNum":"H011250","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Well_Control_Challenges,|brandgroups:Boots_&_Coots,|locations:Global,|prodgroups:Pressure_Control:Well_Control,Pressure_Control:Well_Control_Engineering,"},{"title":"Kick Tolerance and Dynamic Well Control Modeling","description":"Kick modeling and analysis provides value in safety and costsavings. This is especially true for deep water wells where theoverburden is reduced and the margin between mud weight andfracture gradient is miniscule. Kick modeling also provides benefitin reductions of insurance premiums for wells both onshoreand offshore.","path":"/content/dam/ps/public/project_management/contents/Data_Sheets/web/H011784-KickToleranceDynamicWCModeling.pdf","docCreatedDate":"2015-07-31T23:30:00.000-05:00","modifiedDate":"2016-01-14T22:30:00.000-06:00","docdate":"2015-07-31T23:30:00.000-05:00","docrefNum":"H011784","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Well_Control_Challenges,|brandgroups:Boots_&_Coots,|locations:Global,|prodgroups:Pressure_Control:Well_Control,Pressure_Control:Well_Control_Engineering,"},{"title":"Dynamic Kill Analysis","description":"Relief well planning is an industry-wide necessity to help mitigaterisks associated with drilling operations in high-pressure/hightemperatureenvironments. Using reservoir information, fluid and gas properties and state-of-the-art multiphase flow simulationsoftware, Boots & Coots can advise on how to successfullyimplement well killing operations.","path":"/content/dam/ps/public/project_management/contents/Data_Sheets/web/H011186.pdf","docCreatedDate":"2015-01-05T22:30:00.000-06:00","modifiedDate":"2016-01-20T22:30:00.000-06:00","docdate":"2015-01-05T22:30:00.000-06:00","docrefNum":"H011186","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Well_Control_Challenges,|brandgroups:Boots_&_Coots,|locations:Global,|prodgroups:Pressure_Control:Well_Control_Engineering,Pressure_Control:Well_Control,"},{"title":"Relief Well Directional Planning","description":"Relief well planning is aninteractive process whereadjustments in othercomponents of the relief wellmay trigger changes in therelief well directional plan.","path":"/content/dam/ps/public/project_management/contents/Data_Sheets/web/H011187.pdf","docCreatedDate":"2015-01-05T22:30:00.000-06:00","modifiedDate":"2016-01-14T22:30:00.000-06:00","docdate":"2015-01-05T22:30:00.000-06:00","docrefNum":"H011187","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Reservoir_Challenges:High_Pressure,Production_Challenges:Unconventional_Resources,Reservoir_Challenges:High_Temperature,Deepwater,Well_Control_Challenges,|brandgroups:Boots_&_Coots,|locations:Global,|prodgroups:Pressure_Control:Well_Control,Pressure_Control:Well_Control_Engineering,"}]},{"contenttype":"Technical Papers","datasource":[{"title":"2010, January, World Oil - Analysis of Gas Flow Yields Recommendations for Best Cenenting Practices ","description":"An investigation into the flow of gas at a shallow water platform after the 9-5/8 inch casing was cemented revealed that following good cementing practices could have prevented a potentially serious well control incident.","path":"/content/dam/ps/public/project_management/contents/Papers_and_Articles/2010_WorldOil_Analysis_Gas_Flow.pdf","docCreatedDate":"2011-03-04T22:30:00.000-06:00","modifiedDate":"2011-03-04T22:30:00.000-06:00","docdate":"2011-03-04T22:30:00.000-06:00","languageSet":["English"],"accessType":"P","dataSearch":"brandgroups:Boots_&_Coots,|locations:Global,|prodgroups:Pressure_Control:Well_Control:Blowout_Response,Pressure_Control:Well_Control,"},{"title":"2013 E&P WellCall App","description":"New app provides instant well-control response.","path":"/content/dam/ps/public/project_management/contents/Papers_and_Articles/WELLCON-BootsCoots.pdf","docCreatedDate":"2013-11-01T23:30:00.000-05:00","modifiedDate":"2014-03-03T22:30:00.000-06:00","docdate":"2013-11-01T23:30:00.000-05:00","languageSet":["English"],"accessType":"P","dataSearch":"brandgroups:Boots_&_Coots,|locations:Global,|prodgroups:Pressure_Control:Prevention,"},{"title":"World Oil: Rapid deployment of specialized response team quells difficult underwater blowout","description":"A team of dedicated field engineers utilized specialized turbine technology to dredge a lake bed, to uncover a sufficient length of competent production casing, to accommodate a modified surface capping stack, and secure the well. ","path":"/content/dam/ps/public/project_management/contents/Papers_and_Articles/rapid-deployment-of-specialized-response-team.pdf","docCreatedDate":"2019-12-26T11:55:00.000-06:00","modifiedDate":"2019-12-26T17:56:05.227Z","docdate":"2019-12-26T11:55:00.000-06:00","languageSet":["English"],"accessType":"P","dataSearch":"brandgroups:Boots_&_Coots,|locations:Global,|prodgroups:Pressure_Control:Well_Control,"}]},{"contenttype":"centerColList","datasource":[{"title":"Boots & Coots Drills Relief Well for Shallow Target to Kill Catastrophic Blowout","description":"Multidisciplinary response resolves crisis in first attempt","path":"/content/dam/ps/public/project_management/contents/Case_Histories/boots-coots-drills-relief-well.pdf","docCreatedDate":"2016-10-24T23:30:00.000-05:00","modifiedDate":"2016-10-24T23:30:00.000-05:00","docdate":"2016-10-24T23:30:00.000-05:00","docrefNum":"H012364","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Reservoir_Challenges:High_Pressure,Environmental_Challenges:Pressure,|locations:Asia:Southeastern_Asia:Indonesia_Southeastern_Asia,|prodgroups:Pressure_Control:Well_Control,Pressure_Control:Well_Control_Engineering,"},{"title":"In 1924, Myron Kinley Kick-Starts the Well Control Industry with a Bang","description":"Most well control methods and technologies usedtoday trace their roots back to one man: Myron Kinley","path":"/content/dam/ps/public/project_management/contents/Case_Histories/myron-kinley-kick-starts-well-control.pdf","docCreatedDate":"2018-06-01T23:30:00.000-05:00","modifiedDate":"2018-07-11T23:30:00.000-05:00","docdate":"2018-06-01T23:30:00.000-05:00","docrefNum":"H012526","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Reservoir_Challenges:Mature_Fields,|locations:Global,|prodgroups:Pressure_Control:Well_Control,Project_Management,"},{"title":"Boots & Coots Regains Control of Well After Blowout Occurs During Workover Operation","description":"The Boots & Coots well control team was mobilized to the location to assess the situation and assist the operator on the response plan and operation. The team initially inspected and assessed the conditions of the barge and well. Gas was flowing into the lake bed and then to the water surface where it had caught fire.","path":"/content/dam/ps/public/project_management/contents/Case_Histories/boots-and-coots-regains-control-of-well-after-blowout.pdf","docCreatedDate":"2018-02-18T22:30:00.000-06:00","modifiedDate":"2018-03-01T22:30:00.000-06:00","docdate":"2018-02-18T22:30:00.000-06:00","docrefNum":"H012775","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Reservoir_Challenges:Mature_Fields,Well_Control_Challenges,|locations:South_America,|prodgroups:Pressure_Control:Well_Control_Engineering,Pressure_Control:Well_Control,"},{"title":"Boots & Coots Regains Control of Well After Underground Blowout and Surface Broach","description":"Suite of Logging tools helps determine detailedsource control response plan","path":"/content/dam/ps/public/project_management/contents/Case_Histories/boots-coots-regains-control-underground-blowout.pdf","docCreatedDate":"2016-11-04T23:30:00.000-05:00","modifiedDate":"2016-11-04T23:30:00.000-05:00","docdate":"2016-11-04T23:30:00.000-05:00","docrefNum":"H012379","languageSet":["English"],"accessType":"P","dataSearch":"custchallenges:Well_Control_Challenges,|locations:South_America,|prodgroups:Pressure_Control:Well_Control,Pressure_Control:Well_Control_Engineering,"}]}]