Search
REGION REGION

Alaska

REGION

Challenge

Efficiently clean, transport, and dispose of cuttings from oil-based drilling, while maximizing fluids recovery 

Solution

Install Baroid Mobile Vertical Cuttings Dryer (MVCD) system to help:

  • Reduce oil retention on cuttings (ROC) — for less expensive transportation and waste disposal
  • Remove OBM from cuttings — for storage and reuse in future drilling operations

Results

  • Reduced overall cost of cuttings waste disposal
    • Removed 540 bbl. of OBM from cuttings and stored for later use
    • Reduced transportation cost due to less volume of cuttings
    • Disposed of cuttings at lower cost facility along with water-based cuttings
    • Recovered OBM saved operator USD 160k
  • Zero non-productive time (NPT) and no incidents for the entire project

Overview

An operator drilling remote oil wells on the North Slope of Alaska wanted to reduce its overall waste management costs, while also complying with strict environmental regulations. Two main goals of this project were: 1) dry the cuttings to a low enough level, so they could be disposed of at an inexpensive, close-by water-based mud (WBM) cuttings disposal facility, and 2) remove as much oil-based mud (OBM) from the cuttings as possible, to reduce cuttings volume and save recovered fluids for future drilling operations.

MVCD System Offers Economical Solution to Waste Disposal

Baroid supplied a Mobile Vertical Cuttings Dryer (MVCD) as an all-in-one package to catch cuttings directly from the rig during the OBM phases of the well. It also served to lower the oil on cuttings ratio of oil-based fluids to an acceptable limit for waste disposal. After discharge from the dryer, these cuttings were hauled off and mixed with water-based cuttings. The OBM that was recovered from the dryer was returned to the mud plant for conditioning prior to reuse. A significant cost benefit of this mobile unit was the virtual elimination of stand-by time, as well as its self-contained power source that eliminated reliance on rig power.

Successful First-Ever use of MCVD in Alaska

The deployment of Baroid personnel to oversee the project ensured smooth operations. The first-time use of the MVCD system in Alaska was a success from an environmental and cost-effectiveness standpoint. The operator was able to dry its drill cuttings to a low oil retention on cuttings (ROC) percentage for easier transportation and cheaper waste disposal. With an average ROC of 2.35%, the waste could be mixed with water-based cuttings for processing at a nearby disposal facility. Furthermore, the 540 bbl. OBM recovery/reuse helped the operator realize a saving of USD 160k . And this was all accomplished without any NPT or safety incidents.

Related Resources

Separation & Handling Solutions

Separation & Handling Solutions

Comprehensive and efficient technology solutions for optimal fluid recovery and minimal environmental impact.

Explore
icon

Ready to take the next step?

Talk to a Halliburton expert

Get in touch