Biocides

The Multi-Chem line of biocides and biological control technologies are formulated to control deleterious micro-organisms in water used in frac jobs and production systems, and help maintain asset integrity and mitigate potential problems, such as microbiologically induced corrosion (MIC), biomass accumulation, biogenic sulfide production, oil carryover, and polymer degradation.

Benefits

  • Control system fouling from biomass and biofilm formation and protect against microbiologically influenced corrosion (MIC); 
  • Protect formations from externally induced bacterial contamination which can sour oil and gas production;
  • Control the accumulation of sulfate-reducing bacteria (SRB)-generated hydrogen sulfide and iron sulfide in production equipment and vessels, which could potentially lead to failures, system downtime, high operating expenses, reduced hydrocarbon production, and safety concerns due to possible H2S exposure; and
  • Reduce biological contamination from wellbores previously contaminated using untreated fluids.
NaturaLine® Products and Solutions
Multi-Chem’s NaturaLine® solutions, including our line of carefully selected environmentally conscious products, offer a unique opportunity to collaborate with customers and develop the most effective and environmentally responsible options to production challenges.

Filter By  
Количество записей на странице Show     results per page
  TitleНазвание  DateДата
Summary Summary AcroClear® Sulfide Controller
Multi-Chem's AcroClear® acrolein-based H2S scavenger and iron sulfide dissolver consistently outperforms conventional chemical solutions, providing highly effective removal of iron sulfide in production and injection wells, and repairing near-wellbore damage caused by iron sulfide deposits and previous acid-jobs.
Summary Summary AcroCide Biocide
AcroCide biocide is highly effective in controlling micro-organisms in water used in frac jobs and production systems.
Summary Summary NaturaLine® Products and Solutions
Multi-Chem’s customer-specific NaturaLine® solutions can offer the operator the opportunity to use a reduced amount of chemicals and achieve the same, or greater, production results. For the community where the operations take place, this means improved environmental and safety stewardship.
Summary Summary Consecutive Treatments Enhance Biocide Efficacy During Water Flooding of Algerian Oilfield
An Algerian operator found it necessary to employ water flooding for optimal production at two of its mature oil and gas fields. The bulk injection water was comprised of a combination of saline produced water diluted with aquifer water.
Summary Summary Combination Multi-Chem Biocide System Used to Cost-Effectively Save 650,000 Gallons of Water for Re-Use
An operator located in Wheeler, Texas encountered a sudden, emergency bridge plug leak, forcing them to postpone an imminent fracturing treatment for one month during repairs. This unforeseen delay meant that the ready-to-go frac water would be left standing for approximately 30 days in 31 frac tanks on location.
Summary Summary Deep Water Application
In offshore production, learn where complications can arise in your production system and how Multi-Chem can address your issues – substantially increasing the producing life of the well.
Summary Summary Mature Fields Application
See where problems can arise in your production system and how Multi-Chem can bring you an innovative suite of customized solutions that can help reduce your operating costs.
Summary Summary Sulfide Stress Cracking - Practical Application to the Oil and Gas Industry
The phenomenon of sulfide stress cracking (SSC) can result in catastrophic failures of pressurized equipment and piping, resulting in extensive damage, injuries and possible fatalities. This paper concentrates on, and identifies, the requirements for SSC to occur and gives designers and operators practical options for the prevention of SSC in equipment operating in an aqueous H2S environment.
Summary Summary bacterial-related-issues
Typically, if you find a chemical supplier onsite during production, there�s already a problem in your operation.
Summary Summary AcroClear® Sulfide Controller
AcroClear® sulfide controller consistently outperforms conventional chemical solutions, providing highly effective removal of iron sulfide in production and injection wells, and repairing near-wellbore damage caused by iron sulfide deposits and previous acid-jobs.
Summary Summary H2S-Scavengers
Multi-Chem offers a complete line of water-soluble and oil-soluble hydrogen sulfide scavengers that can be applied via continuous injection or through batch treatments.
Summary Summary Corrosion-Inhibitors
Multi-Chem offers a variety of corrosion inhibitors, such as water- or oil-soluble, high-shear, high-temperature, and pressure-stable. Multi-Chem also certifies corrosion inhibitors for umbilical use.
Summary Summary Biocides
The Multi-Chem line of biocides and biological control technologies are formulated to control deleterious micro-organisms in water used in frac jobs and production systems, and help maintain asset integrity and mitigate potential problems, such as microbiologically induced corrosion (MIC), biomass accumulation, biogenic sulfide production, oil carryover, and polymer degradation.
Summary Summary Iron-Sulfide-Dissolvers
Multi-Chem provides a number of specialty chemicals to remove iron sulfide, all specifically designed to attack your unique production challenges in the most effective way possible. Our approach is tailored to your own system conditions and operating parameters for the best in corrosion protection.
Summary Summary NaturaLine® Products and Solutions
Multi-Chem’s NaturaLine® solutions, including our line of carefully selected environmentally conscious products, offer a unique opportunity to collaborate with customers and develop the most effective and environmentally responsible options to production challenges.
Related Information

Related Information Дополнительная информация