Cementing

Successful primary cementing operations result in a cement sheath to bond and support casing and provide zonal isolation. Good zonal isolation helps prevent the loss of production, control inter-zonal flow and/or flow to the surface, reduce water production and improve confinement of stimulation treatments. Halliburton has more than 90 years of experience and research/development in achieving optimum cement-sheath integrity. Halliburton has been leading the industry in delivering effective zonal isolation in oil, gas, geothermal, offshore and hydrate wells since 1919.

Additionally, Halliburton has more than 105 cement laboratories throughout the world to engineer cement slurry designs for specific well needs. Utilizing global process standards, these labs are essential for achieving the consistency and quality of product delivered in the field.

Importantly, Halliburton offers iCem® Service, the industry's most robust engineering design tool for assessing and monitoring specific well variables before, during, and after a cement job. The simulations run through iCem service allow operators to make more informed decisions and achieve operational efficiencies.

Halliburton's cementing, pumping and mixing services are supported by state-of-the-art land and offshore cementing equipment, designed and manufactured by Halliburton to industry standards.

Additionally, Halliburton leads the industry in offering casing equipment in conjunction with cementing services. Since patenting the two-plug system in 1922, Halliburton has continuously developed new cementing techniques and casing equipment products.

Use of Halliburton cementing solutions can help prevent undesirable movement of fluids from one zone to another. For instance, wells used for storing CO2 or wells exposed to formation CO2 are likely to be subjected to the corrosive effects of CO2-induced carbonic acid - and this could compromise zonal isolation. Halliburton has proprietary cementing solutions that are particularly suited to situations encountered in wells producing CO2 or co-producing hydrocarbons and in carbon capture and storage (CCS) wells.

 

Technical Papers

Technical Papers

Learn about the latest technology breakthroughs from one of the energy industry’s top innovators.

Technical Papers

Cementing Services

Filter By  
Количество записей на странице Show     results per page
  TitleНазвание  DateДата
Summary Summary Exploring one of the world's largest natural gas finds in an area with no oilfield infrastructure
Halliburton’s unique, mobile wireline facilities provide cost-effective, reliable, support for operator’s deepwater exploration efforts in Tanzania.
Summary Summary HCS AdvantageOne™ offshore cementing system was featured in Upstream Technology Magazine
The HCS AdvantageOne™ offshore cementing system is the next generation of cementing and well-control pump performance for ultra-deep water.
Summary Summary Halliburton to Provide Solutions for Accessing TNK-BP’s Tight Oil Reserves in Russia’s Krasnoleninskoe Field
TNK-BP has selected Halliburton to provide an integrated services solution to increase production from the complex and challenging tight oil reserves...
Summary Summary Cementing Best Practice: Tuned Light Cement Rig Operations Sign in required
7-page Best Practice dated 2/14/04. Document contains special considerations required for Tuned Light Cement Blends with respect to (1) Bulk Blending, (2) Bulk Sampling, (3) Testing on Location, and (4) Slurry QC during the Job.
Summary Summary Coal Bed Methane Cementing Best Practices Sign in required
Presentation of Best Practices for CBM Cementing, 18 slides, dated 10/2/2002
Summary Summary ZoneSeal Light Foam Cement System Sign in required
ZoneSeal® Light cement system is a system for performing foam cementing jobs when the calculated nitrogen volume is limited. Instead of using liquid nitrogen and a nitrogen converter, gasous nitrogen is used. The ZoneSeal Light system is a fully integrated and automated system that helps ensure that the foaming process is controlled.
Summary Summary ZoneSeal Light Foam Cement System-H07083 (A4) Sign in required
ZoneSeal® Light cement system is a system for performing foam cementing jobs when the calculated nitrogen volume is limited. Instead of using liquid nitrogen and a nitrogen converter, gasous nitrogen is used. The ZoneSeal Light system is a fully integrated and automated system that helps ensure that the foaming process is controlled.
Summary Summary Spacer Tech Sign in required
The variable-viscosity, optimized-rheology spacer lowers drilling costs through shorter rig time and recovery of drilling fluids. In one notable application, the use of a variable-viscosity, optimized-rheology (VVOR) spacer enabled an operator to save $150,000 on rig time and recover usable drilling fluid. Avoidance of remedial cementing saved from $15,000 to $100,000. A successful well completion demands the satisfaction of a number of criteria, one of which is the effective placement of cement. The main purposes of primary cementing are to create a secure bond with the pipestring and formation in order to strengthen both, supply zonal isolation from formation fluids by sealing the annulus, and protect the casing from corrosion.
Summary Summary Wettability Evaluation Boosts Efficiency, Economy of Cement Operations Sign in required
This paper offers an introductory overview of apparent wettability evaluation. A new technique for evaluating the apparent wettability of spacer fluids and preflushes is helping operators significantly reduce surfactant requirements and minimize the potential for costly zonal isolation problems. In an early application, the technique allowed laboratory personnel to custom-design a surfactant package for a major operator that reduced surfactant costs by as much as 50%.
Summary Summary PermSeal Solution Stops Artesian Water, Geopressured Sand Flows Sign in required
Operators drilling in deepwater off the continental shelf can use PermSeal, an acrylate monomer solution (AMS), to prevent artesian water flows and geopressured sand flows from entering the wellbore. Unchecked water flows can wash cement away from casing, making cementation of conductor pipe expensive and sometimes impossible.
Summary Summary Spacer Tech Saves Sign in required
In one notable application, the use of a variable-viscosity, optimized-rheology (VVOR) spacer enabled an operator to save $150,000 on rig time and recover usable drilling fluid. Avoidance of remedial cementing saved from $15,000 to $100,000.
Summary Summary Squeeze Cementing Using Micro Matrix Ultrafine Cement Sign in required
Defined by Shryock and Slagle as "the process of forcing a cement slurry into holes in the casing and cavities behind the casing," squeeze cementing has often been viewed as an art rather than a science. Because of this, Micro Matrix® ultrafine cement has been developed to help increase operators' success in squeeze-cementing operations.
Summary Summary StrataLock™ Wellbore/Formation Stabilization System Consolidates Wellbores (Paper / Article) Sign in required
StrataLock™ Wellbore/Formation Stabilization System Consolidates Wellbores (Paper / Article)
Summary Summary Integrated Controls for Precision Cementing Sign in required
Over the years, cementing equipment has been refined to maximize the performance of new materials and processes and to accommodate the requirements of increasingly complex cementing jobs. Now, technology is taking cement quality control to an even higher level with a new integrated control system.
Summary Summary Job Design and Cement System to Contain Steam and Improve Heavy Oil Recovery Sign in required
Heavy oil is found in different parts of the world and could be an important part of the answer to this demand for energy. However, heavy oil is highly viscous and traditional methods are not sufficient to produce these wells.
Summary Summary Tailor Lightweight Slurry Designs to Well Conditions and Production Plans Sign in required
White Paper by Crook, Kulakofsky, and Griffith. More than ever before, operators and service companies planning lightweight oil- and gas-well cement jobs are giving attention to casing/cement sheath integrity for the entire life of oil, gas, geothermal, and gas-storage wells.
Summary Summary Central Graben Extreme Offshore High-Pressure/High-Temperature Cementing Case Study Sign in required
This paper presents six cementing case histories from offshore wells in the Central Graben area of the North Sea. These wells were chosen because they provide valuable information regarding the problems encountered in cementing extreme offshore, high-pressure/high-temperature (HPHT) wells. The Central Graben wells had an average depth of 6000 m true vertical depth (TVD), temperatures greater than 200°C, small fracture/pore-pressure margins, and bottomhole pressures exceeding 1,100 bar. The well deviation varied from near vertical to a maximum of 35°. These downhole conditions are the most extreme yet experienced in a field development in the North Sea.
Summary Summary Repairing Casing and Collar Leaks with Micro Matrix Cement Sign in required
Casing and collar leaks are a common problem for injection operations in many wells. These leaks can be caused by corrosion, casing damage resulting from tool wear, or failure of the threads to provide an adequate seal. Squeezing the leaks with low-fluid-loss cement slurries can repair the leaks. However, if the casing collar leak is narrow or tight, standard API cements will not penetrate enough to provide a complete seal without requiring perforation. Tight leaks can restrict the entry of standard cement slurries as much as 500 psi in 10 to 20 minutes.
Summary Summary External Sleeve Inflatable Packer Collar (ESIPC) (Interactive Tool) Sign in required
3D cutaway animations of the operation of the External Sleeve Inflatable Packer Collar
Summary Summary Standard - c. Dimensions and Strengths Sign in required
Cementing Tables - Standard
Summary Summary Standard - i. Technical Information and API Cementing Schedules Sign in required
Cementing Tables - Standard
Summary Summary Standard - o. Special Cements Sign in required
Cementing Tables - Standard
Summary Summary Standard - a. Volume and Height Between Tubing and Hole, and Casing and Hole Sign in required
Cementing Tables - Standard
Summary Summary Standard - Redbook Cementing Tables Sign in required
Cementing Tables - Standard
Summary Summary Standard - m. Class H Cement Sign in required
Cementing Tables - Standard
Summary Summary Standard - f. Coiled Tubing Technical Data Sign in required
Cementing Tables - Standard
Summary Summary Standard - d. Capacity Sign in required
Cementing Tables - Standard
Summary Summary Standard - n. Promix Cement and Pozmix 140 Sign in required
Cementing Tables - Standard
Summary Summary Standard - k. Class C Cement Sign in required
Cementing Tables - Standard
Summary Summary Standard - j. Class A or B Cement Sign in required
Cementing Tables - Standard
Summary Summary Standard - p. Calculations and Formulae Sign in required
Cementing Tables - Standard
Summary Summary Metric - b. Dimensions and Strengths Sign in required
Engineering reference book containing: Volume and Height between Tubing and Hole and Casing and Hole; Displacement; Dimensions and Strengths; Capacity; Volume and Height between Tubing and Casing and between Casings; Coiled Tubing Technical Data; Drill Bit Classifier; Fluids Reference; Technical Data including API Cementing Schedules and Cement Classes; and Calculations and Formulae.
Summary Summary Metric - n. Special Cements Sign in required
Engineering reference book containing: Volume and Height between Tubing and Hole and Casing and Hole; Displacement; Dimensions and Strengths; Capacity; Volume and Height between Tubing and Casing and between Casings; Coiled Tubing Technical Data; Drill Bit Classifier; Fluids Reference; Technical Data including API Cementing Schedules and Cement Classes; and Calculations and Formulae.
Summary Summary Metric - k. Class G Cement Sign in required
Engineering reference book containing: Volume and Height between Tubing and Hole and Casing and Hole; Displacement; Dimensions and Strengths; Capacity; Volume and Height between Tubing and Casing and between Casings; Coiled Tubing Technical Data; Drill Bit Classifier; Fluids Reference; Technical Data including API Cementing Schedules and Cement Classes; and Calculations and Formulae.
Summary Summary Metric - h. Technical Information and API Cementing Schedules Sign in required
Engineering reference book containing: Volume and Height between Tubing and Hole and Casing and Hole; Displacement; Dimensions and Strengths; Capacity; Volume and Height between Tubing and Casing and between Casings; Coiled Tubing Technical Data; Drill Bit Classifier; Fluids Reference; Technical Data including API Cementing Schedules and Cement Classes; and Calculations and Formulae.
Summary Summary Metric - Redbook - Cementing Tables Sign in required
Engineering reference book containing: Volume and Height between Tubing and Hole and Casing and Hole; Displacement; Dimensions and Strengths; Capacity; Volume and Height between Tubing and Casing and between Casings; Coiled Tubing Technical Data; Drill Bit Classifier; Fluids Reference; Technical Data including API Cementing Schedules and Cement Classes; and Calculations and Formulae.
Summary Summary Metric - l. Class H Cement Sign in required
Engineering reference book containing: Volume and Height between Tubing and Hole and Casing and Hole; Displacement; Dimensions and Strengths; Capacity; Volume and Height between Tubing and Casing and between Casings; Coiled Tubing Technical Data; Drill Bit Classifier; Fluids Reference; Technical Data including API Cementing Schedules and Cement Classes; and Calculations and Formulae.
Summary Summary Metric - c. Capacity Sign in required
Engineering reference book containing: Volume and Height between Tubing and Hole and Casing and Hole; Displacement; Dimensions and Strengths; Capacity; Volume and Height between Tubing and Casing and between Casings; Coiled Tubing Technical Data; Drill Bit Classifier; Fluids Reference; Technical Data including API Cementing Schedules and Cement Classes; and Calculations and Formulae.
Summary Summary Metric - d. Volume and Height Between Tubings, Between Tubings and Casing, and Between Casing Sign in required
Engineering reference book containing: Volume and Height between Tubing and Hole and Casing and Hole; Displacement; Dimensions and Strengths; Capacity; Volume and Height between Tubing and Casing and between Casings; Coiled Tubing Technical Data; Drill Bit Classifier; Fluids Reference; Technical Data including API Cementing Schedules and Cement Classes; and Calculations and Formulae.
Summary Summary Metric - e. Coiled Tubing Technical Data Sign in required
Engineering reference book containing: Volume and Height between Tubing and Hole and Casing and Hole; Displacement; Dimensions and Strengths; Capacity; Volume and Height between Tubing and Casing and between Casings; Coiled Tubing Technical Data; Drill Bit Classifier; Fluids Reference; Technical Data including API Cementing Schedules and Cement Classes; and Calculations and Formulae.
Summary Summary Metric - a. Volume and Height Between Tubing and Hole, and Casing and Hole Sign in required
Engineering reference book containing: Volume and Height between Tubing and Hole and Casing and Hole; Displacement; Dimensions and Strengths; Capacity; Volume and Height between Tubing and Casing and between Casings; Coiled Tubing Technical Data; Drill Bit Classifier; Fluids Reference; Technical Data including API Cementing Schedules and Cement Classes; and Calculations and Formulae.
Summary Summary Metric - m. Promix Cement and Pozmix 140 Sign in required
Engineering reference book containing: Volume and Height between Tubing and Hole and Casing and Hole; Displacement; Dimensions and Strengths; Capacity; Volume and Height between Tubing and Casing and between Casings; Coiled Tubing Technical Data; Drill Bit Classifier; Fluids Reference; Technical Data including API Cementing Schedules and Cement Classes; and Calculations and Formulae.
Summary Summary Metric - j. Class C Cement Sign in required
Engineering reference book containing: Volume and Height between Tubing and Hole and Casing and Hole; Displacement; Dimensions and Strengths; Capacity; Volume and Height between Tubing and Casing and between Casings; Coiled Tubing Technical Data; Drill Bit Classifier; Fluids Reference; Technical Data including API Cementing Schedules and Cement Classes; and Calculations and Formulae.
Summary Summary Metric - i. Class A or B Cement Sign in required
Engineering reference book containing: Volume and Height between Tubing and Hole and Casing and Hole; Displacement; Dimensions and Strengths; Capacity; Volume and Height between Tubing and Casing and between Casings; Coiled Tubing Technical Data; Drill Bit Classifier; Fluids Reference; Technical Data including API Cementing Schedules and Cement Classes; and Calculations and Formulae.
Summary Summary Standard - l. Class G Cement Sign in required
Cementing Tables - Standard
Summary Summary Standard - b. Displacement Sign in required
Cementing Tables - Standard
Summary Summary Standard - e. Volume and Height Between Tubings, Between Tubings and Casing, and Between Casing Sign in required
Cementing Tables - Standard
Summary Summary BaraLock®-666.M LCM - Product Data Sheet
BaraLock®-666.M premium medium-sized reticulated foam lost circulation material (LCM) is used as a supplement to any LCM pill formulation in any fluid type and any formation, but not intended for reservoir applications. This proprietary, engineered, supplemental solution is designed to help seal fractures up to at least 10,000 microns.
Summary Summary BaraLock®-666.F LCM - Product Data Sheet
premium fine-sized reticulated foam lost circulation material (LCM) is used as a supplement to any LCM pill formulation in any fluid type and any formation, but not intended for reservoir applications. This proprietary, engineered, supplemental solution is designed to help seal fractures up to at least 3,000 microns.
Summary Summary BaraShield®-664 LCM - Product Data Sheet
BaraShield®-664 medium-sized granular multi-modal lost circulation material is used to prevent or remediate seepage to partial lost circulation in any fluid type and is applicable in any formation – not intended for reservoir applications.
Summary Summary BaraLock®-666.C LCM - Product Data Sheet
BaraLock®-666.C premium coarse-sized reticulated foam lost circulation material (LCM) is used as a supplement to any LCM pill formulation in any fluid type and any formation, but not intended for reservoir applications. This proprietary, engineered, supplemental solution is designed to help seal fractures up to at least 25,000 microns (< 1 inch).
Summary Summary BaraShield®-663 LCM - Product Data Sheet
BaraShield®-663 premium fine-sized granular multi-modal lost circulation material is used to provide wellbore stability in any fluid type and is applicable in any formation – not intended for reservoir applications.
Summary Summary BaraBlend®-665 LCM - Product Data Sheet
BaraBlend®-665 premium granular, high fluid loss lost circulation material (contains fine-sized reticulated foam) can be used in fresh or salt water in any formation – not intended for reservoir applications.
Summary Summary Customized Lost Circulation Treatments Help Resolve Severe Losses in Highly Fractured Geothermal Wells
Geothermal wells in Northern California are drilled in highly fractured volcanic reservoirs, where massive fluid losses can bring operations to a halt.
Summary Summary STEELSEAL® 100 - Product Data Sheet
STEELSEAL® lost circulation material products are resilient, angular, dual-carbon based lost circulation materials.
Summary Summary STEELSEAL® 50 - Product Data Sheet
STEELSEAL® lost circulation material products are resilient, angular, dual-carbon based lost circulation materials.
Summary Summary STEELSEAL® 400 - Product Data Sheet
STEELSEAL® lost circulation material products are resilient, angular, dual-carbon based lost circulation materials.
Summary Summary STEELSEAL® 1000 - Product Data Sheet
STEELSEAL® lost circulation material products are resilient, angular, dual-carbon based lost circulation materials.
Summary Summary STEELSEAL® 25 - Product Data Sheet
STEELSEAL® lost circulation material products are resilient, angular, dual-carbon based lost circulation materials
Summary Summary BaraShield®-663 LCM Standard Field Application Procedure
Standard Field Application Procedure
Summary Summary HYDRO-PLUG® LCM Standard Field Application Procedure
Standard Field Application Procedure
Summary Summary STOPPIT® LCM Standard Field Application Procedure
Standard Field Application Procedure
Summary Summary BaraShield®-664 LCM Standard Field Application Procedure
Standard Field Application Procedure
Summary Summary Venezuela: EZ-PLUG® LCM reduces losses in high permeability, low fracture gradient sections of allochthonous zone
Lost circulation is common in the allochthonous zone because of low fracture gradients and high permeability. The zone is composed of multiple formation types adding to the complexity of maintaining an appropriate fluid density.
Summary Summary Angola: LCM Pill Seals loss Zone in Deepwater Angola
By Using HYDRO-PLUG as a Cement Support in the open hole before setting a kick off plug, the cement remained in place and did not allow for any channeling inside the large rat hole that held the junk from centralizers left in the hole.
Summary Summary Static loss rate drops 87% after use of DUO-SQUEEZE® R LCM pills
Plugging Perforations with Engineered LCM Pills Saves Operator US$500,000 in Rig Time and Eliminates Cement Plug Operation
Summary Summary STOPPIT® LCM Pills Cure Loss Rate for Oman Operator
STOPPIT® LCM Pills Cure Severe Losses, Eliminating Need for Cement Plug
Summary Summary Combo pills provide Immediate Impact Intervention Solution through rapid seal in severe loss zone
Engineered Combo Pills with BAROFIBRE®, STEELSEAL® and N-SEAL™ LCMs Helped Stop Losses Quickly, Provide Immediate Impact Solution
Summary Summary Static loss rate drops to zero after use of DUO-SQUEEZE® R LCM pills
Plugging Perforations with Engineered DUO-SQUEEZE® R LCM Pills Saves Operator US$200,000 on Sidetrack Operation
Summary Summary STEELSEAL®/BARACARB® LCM pill saves $4 million on deepwater well
Hesitation squeeze with STEELSEAL®/BARACARB® LCM pill stops losses and strengthens wellbore in production interval
Summary Summary WellSET® treatment helps operator avoid losses while drilling severely depleted sands
WellSET® treatment helps operator avoid losses while drilling severely depleted sands
Summary Summary BARAFLAKE® acid-soluble lost circulation material pill cures losses
BARAFLAKE® acid-soluble lost circulation material (LCM) pill cures losses in deepwater carbonate reservoir
Summary Summary BaraShield®-664 & BaraLock®-666 LCMs Help Cure Total Losses & Improve Cement Job in Known Thief Zone
Engineered BaraShield®-664 and BaraLock®-666 sweeps and LCM squeeze pills were used throughout the interval to seal and heal the wellbore.
Summary Summary Customized LCM Squeeze Pill Cures Losses in Depleted Sandstones and Eliminates Additional Trips
STOPPIT® LCM enables exceptional fracture plugging, saving operator time and money.
Summary Summary FB4K Blender
Halliburton’s FB4K blender is designed with versatility in mind. The combination of three sand screws, three dry feeders and seven liquid additive systems means Halliburton can meet the requirements of virtually any fracturing design.
Summary Summary NEA-96M™ surfactant
NEA-96M™ surfactant is a general surfactant and nonemulsifier for preflushes, acid preflushes, HCl and HF acid systems, overflushes, and fracturing fluids.
Summary Summary Pen-88™ nonionic blend of solvents and surfactants
Pen-88™ is a nonionic blend of solvents and surfactants that forms a microemulsion, a stable dispersion that will not separate into mutually insoluble phases, when added to an acid or non-acid fluid.
Summary Summary SSO-21MW agent
SSO-21MW agent is a foaming surfactant that provides improved water recovery in low permeability gas wells, such as shale or coal beds.
Summary Summary FR-26 LC™
FR-26 LC™ is a liquid friction reducer for water and brine. It consists of an oil-external emulsion that is easily inverted and/or broken and dispersed with minimal shear in aqueous fluids.
Summary Summary Twin Panther Pump Trailer
Twin Panther Pump Trailer
Summary Summary HT-2000 Pump Trailer
HT-2000 Pump Trailer
Summary Summary HQ-2000 Pump Trailer
HQ-2000 Pump Trailer
Summary Summary PERMVIS™ VFR-10 Friction Reducer
PERMVIS™ VFR-10 friction reducer can effectively perform in waters with a variety of ions (sodium, calcium, sulfates, strontium, magnesium, iron, chlorides).
Summary Summary FR-76™ Friction Reducer Agent
FR-76™ liquid friction reducer is designed to be used in fresh water and low TDS (total dissolved solids) brines.
Summary Summary HT-2000 Pump Trailer
HT-2000 Pump Trailer
Summary Summary Q10™ Pumping Unit
Today’s shale fracturing treatments have stretched the abilities of legacy pumping systems to the extreme edges of the performance envelope.
Summary Summary D-Crude 1™ surfactant
D-Crude 1™ surfactant helps disperse and remove crude oil and other petroleum-based fluids from refinery equipment and pipelines.
Summary Summary AQF-2™ Foaming Agent
AQF-2™ anionic surfactant and foaming agent is used to stabilize the gas and liquid levels of foamed fracturing fluids.
Summary Summary WS-36™ dispersant
WS-36™ dispersant is used in the preparation of aqueous external-phase dispersions. It is most commonly used in the PAD™ Paragon Acid Dispersion system that dissolves organic residues and removes scale deposits.
Summary Summary AS-7™ Surfactant/Antisludging Agent
AS-7™ nonionic surfactant functions as an antisludging agent in acid solutions. AS-7 surfactant may act as a chemical barrier between asphaltene particles and acid, helping prevent the precipitation of acid sludge.
Summary Summary LoSurf-2000S™ Surfactant
LoSurf-2000S™ surfactant is a solid, powder surfactant. It is a blend of anionic nonemulsifier and an anionic hydrotrope. LoSurf-2000S surfactant can be used as a surface-tension reducer and nonemulsifier in fracturing and acidizing applications.
Summary Summary WAC-9™ fluid-loss additive
WAC-9™ is a fluid-loss additive designed for use in gelled fracturing fluids. fracturing fluids.
Summary Summary SentinelCem™ Cement Cures Losses Successfully in Heavily Fractured Carbonate Formation in Southern Oman
Halliburton solution represents paradigm shift in lost circulation management.
Summary Summary Streamlined Well Construction Eliminates 71 Days of Rig Time, Saving Consortium USD 90 Million
Halliburton sets new deepwater benchmark in brazil's deepwater libra field
Summary Summary CCS Brochure
Customer Brochure
Summary Summary Long String Cemented RapidSuite™ System with Plug and Perf Saves Time and Reduces Risk
A major customer in Mid-Continent, USA was looking to reduce risk, time and cost of their multistage, extended-reach lateral, horizontal completion campaign in the Woodford shale.
Summary Summary What Happens When Compatibility Meets Reliability?
Long Lateral Efficiency. Halliburton has overcome the challenges of reaching setting depth with casing strings in extended reach wells. How? The Halliburton BACE™ (Buoyancy Assisted Casing Equipment) tool and RapidStart® Initiator CT (Casing Test) sleeve. By combining these two technologies, longer laterals can be completed efficiently and reliably.
Summary Summary Cemented VersaFlex® expandable liner hanger provided superior reliability and saved 24 hours of rig time
A major operator in Australia wanted to install a 4 1/2-in. liner hanger into a 6 1/8-in. openhole wellbore. They knew that once they reached total depth, if the flow rate was unacceptable, the liner hanger would need to be run and cemented in place to enable fracturing operations.
Summary Summary How a more efficient Halliburton cleanout approach helped operators save days of deepwater rig time
Halliburton’s single-trip CleanWell® system technology saved millions and removed four times more debris than conventional dual-trip cleanouts
Summary Summary Norway: Top of Cement Isolation of Gas Zone on Subsea Field
In one of the major subsea producing fields in the North Sea, a hydrocarbon (HC) zone was identified. The operator’s primary challenge was to isolate this HC zone without cementing all the way into the previous casing shoe, which could potentially cause trapped pressure due to temperature cycling and collapse of the previous casing.
Summary Summary North America:Subsea Surface Casing - Shallow Water Shutoff
an operator discovered water migration to the sea bed. The water-bearing zone caused isolation failure around the 18.7-in. casing, allowing free water leak to seabed.
Summary Summary Norway: Shallow Gas Isolation - Exploration Well
Shallow gas was experienced during pilot hole drilling of a subsea exploration well in the North Sea. The operator chose to use Swell Technology™ systems combined with the conventional cementing methods.
Summary Summary Halliburton Casing Equipment Sales Catalog—2013 Update
Operators and drilling contractors want to reduce capital expenditures and operational costs. They are looking for reliability, innovation, and operational integrity.
Summary Summary Casing Equipment
Operators and drilling contractors want to reduce capital expenditures and operational costs. They are looking for reliability, innovation, and operational integrity.
Summary Summary 20,000 psi H-Manifold
Halliburton's 20,000 psi H-manifold combined with the most reliable pumps in the industry provides the pumping pressure capacity required for safe cementing operations in the more extreme high-pressure formations.
Summary Summary 20,000 psi H-Manifold
Halliburton's 20,000 psi H-manifold combined with the most reliable pumps in the industry provides the pumping pressure capacity required for safe cementing operations in the more extreme high-pressure formations.
Summary Summary SaltShield Cementing Service
SaltShield cementing service is a combination of WellLife service, an advanced modeling tool for planning and SaltShield cement, an advanced cement system designed with properties to overcome issues from simple and complex salts.
Summary Summary Ruggedized Global Cementing Truck
Halliburton's ruggedized global cementing truck (RGT) is designed to reliably withstand extremely harsh oilfield environments and temperatures ranging from -31°F (-35°C) to 113°F (45°C) with minimal maintenance.
Summary Summary Tuned® Spacer III Ultra HT spacer fluid
Tuned® Spacer III Ultra HT spacer fluid is designed especially for high temperature applications between 300°F (149°C) and 450°F (232°C). The spacer’s rheological properties (viscosity and yield point) can be designed for specific application in individual well conditions.
Summary Summary ThermaLock™ Cement
ThermaLock™ cement is a specially formulated calcium phosphate cement that is both CO2 and acid resistant. The result of a joint development project for high temperature, geothermal wells, ThermaLock cement is now being promoted as an alternative for Portland cement wherever CO2 may be encountered.
Summary Summary Tuf Fiber™ 594 cement additive
When blended into cement slurry systems, Tuf Fiber™ 594 cement additive helps overcome lost circulation while improving wellbore strength by adding cohesiveness and increased ductility to the set cement sheath.
Summary Summary SuperFill Big Bore Surge Reduction Equipment
The SuperFill™ Big Bore surge reduction equipment has 17-percent more flow area than comparable float equipment to enable faster run-in speeds in large bore applications while managing surge pressures.
Summary Summary SA-1020™ suspending agent
SA-1020™ suspending agent is a delayed-release viscosifier that helps prevent solids from settling in cement slurry systems in temperatures above 250°F (121°C). Additionally, SA-1020 agent helps control free fluid in cement slurries. The result is improved slurry stability at bottomhole circulating temperatures ranging between 250°F (121°C) and 450°F (232°C).
Summary Summary SuperFill Big Bore Surge Reduction Equipment - Offshore
The SuperFill™ Big Bore surge reduction equipment has 17-percent more flow area than comparable float equipment to enable faster run-in speeds in large bore applications while managing surge pressures.
Summary Summary iCem Service - Available Results
This document is a high-level overview of all the analytical results available on cementing slurries, operations and job planning.
Summary Summary iFacts™ laboratory management system
Although Halliburton's fluid laboratories are geographically dispersed, laboratory operations are standardized and the test results are captured and globally accessible through iFacts™ laboratory management system.
Summary Summary NeoCem Cement
NeoCem™ cement is a low-Portland cement system that delivers high-performance compressive strength, elasticity, and shear bond at a lower density than conventional cement systems. The NeoCem cement system is the first low-Portland oilfield cement system capable of improving the integrity of the hydraulic annular seal as well as the set-sheath elasticity.
Summary Summary iCem Service - Laboratory Validation
The University of Adelaide in Australia was selected to assess the dynamic evolution of fluid concentration in the wellbore as a function of time. This flow visualization study assessed the dynamics of fluid-to-fluid displacmeent in eccentric annuli.
Summary Summary LifeCem™ 100 cement additive
The primary use of LifeCem 100 cement additive is to increase the set cement sheath’s capability to resist cyclic loading. This additive achieves this by modifying the Young’s modulus and Poisson’s ratio of set cement, and by sealing microannuli if they form in the sheath.
Summary Summary ZoneSeal Isolation Process and Foam Systems
The ZoneSeal Isolation Process helps ensure a stable, foamed slurry. The process includes a fully integrated automated system that adjusts nitrogen content to maintain constant density by accounting for increasing hydrostatic pressure with depth.
Summary Summary Latex 3000 Addtive_Deepwater Data Sheet
Latex 3000™ cement additive is a liquid additive designed to lower equivalent circulating density (ECD) and impart excellent fluid-loss control, high-temperature suspension properties, and acid resistance to cement slurries.
Summary Summary SaltShield Cementing Service
SaltShield cementing service is a combination of WellLife service, an advanced modeling tool for planning and SaltShield cement, an advanced cement system designed with properties to overcome issues from simple and complex salts.
Summary Summary Obex™ Annular Casing Packer
The Obex™ annular casing packer is designed to be set inside cased holes to provide a high-pressure, gas-tight, casing-to-casing seal. This seal helps mitigate annular gas migration and/or supports the hydrostatic weight of annular well fluids above the Obex annular casing packer in wells with weak formation zones.
Summary Summary Suspend HT Additive - Suspending Agent
Suspend HT Additive is a suspending aid and free-water control agent. It can be used to counteract the thermal thinning of cement slurries so that the slurry viscosity profile is not affected by temperature.
Summary Summary Super Seal II® Universal Blank RPT Reamer Shoe
The Super Seal II system is now adding the universal blank RPT reamer shoe (Figure 1), designed to cut a variety of casing threads within a given casing size and weight range. The Super Seal II float valve has been used in cementing operations in every part of the globe where reliability and dependability are required.
Summary Summary Latex 3000 Addtive Data Sheet
Latex 3000™ cement additive is a liquid additive designed to lower equivalent circulating density (ECD) and impart excellent fluid-loss control, high-temperature suspension properties, and acid resistance to cement slurries.
Summary Summary Micro Matrix® Cement
Micro Matrix® cement now offers solutions to special cementing problems
Summary Summary Type H Selective Release Plug Set H07570
Selective-release (SR) plug systems allow you to run a two-stage cement job in a liner and/or in an offshore application where the casing is hung off a subsea hanger system.
Summary Summary ZoneSeal Isolation Process and Foam Systems
The ZoneSeal Isolation Process helps ensure a stable, foamed slurry. The process includes a fully integrated automated system that adjusts nitrogen content to maintain constant density by accounting for increasing hydrostatic pressure with depth.
Summary Summary WellLife 1094 additive
WellLife 1094 additive is designed to address mixability while conveying enhanced mechanical properties to cement. It helps enhance the tensile strength of the cement system into which it is blended. This additive also helps address lost circulation.
Summary Summary LockCem™ cement
LockCem™ cement is a proprietary blend of a water-tolerant resin, WellLock® resin system, with any class of Portland cement. LockCem cement provides the best of both the resin and the cement qualities, while overcoming the challenges of oilfield resin use.
Summary Summary Wellbore Integrity and Enhancer 923 Cement Agent
When blended into a specfically designed Halliburton cement system, Enhancer 923™ cement agent delivers the benefits of a lightweight cement with the unique ability to catalyze crystalline growth during curing for enhanced early compressive strength development. Additionally, it has the mechanical ability to sequester water in a manner that reduces API fluid loss while enhancing free water control.
Summary Summary Commander 500 Top-Drive Cementing Head - Deep Water
The Commander™ 500 top-drive cementing head with wireless remote control allows for continuous pumping during the launch of balls or darts for uninterrupted fluid flow, helping protect the formation from surge pressures caused when circulation is re-established. It also enables on-going rotation and reciprocation of casing during cementing operations to help facilitate full coverage; and can be manually or wirelessly remotely actuated.
Summary Summary Fluid Loss Additives
Our Case for Halliburton Additives is Water Tight. The Industry's Most Complete Line of Fluid Loss Additives Means We Can Tailor A Slurry Precisely To Your Well's Requirements — For The Most Effective Cementing Job Possible.
Summary Summary Foamer 1026 Foamer/Stabilizer
Foamer 1026 foamer/stabilizer is an environmentally acceptable surfactant-blend foam stabilizer and primary foamer. It is designed to help lower the density in water-based oilfield fluid systems such as spacers and cements.
Summary Summary Commander 500 Top-Drive Cementing Head
The Commander™ 500 top-drive cementing head with wireless remote control allows for continuous pumping during the launch of balls or darts for uninterrupted fluid flow, helping protect the formation from surge pressures caused when circulation is re-established. It also enables on-going rotation and reciprocation of casing during cementing operations to help facilitate full coverage; and can be manually or wirelessly remotely actuated.
Summary Summary Super Seal II High-Port Upjet Float Shoe with Ray Centralizers
Super SealTM II High-Port Upjet Float Shoe with Ray Centralizers
Summary Summary CleanSpacer III Spacer Fluid
Environmentally-safe, biodegradable spacer helps optimize wellbore preparation
Summary Summary Non-Rotating Cementing Plugs A4
Halliburton’s innovative design includes plugs that have locking teeth on both the top and bottom plug and Super Seal II® float collars that allow plugs and casing equipment to lock together during drill-out.
Summary Summary Flocele lost-circulation cement additive
Flocele™ lost-circulation cement additive helps control lost circulation.
Summary Summary BridgeMaker™ Family of LCM Spacer Fluids
The BridgeMaker™ Family of LCM spacer fluid is designed to overcome lost circulation while preparing the wellbore to receive cement. This family of spacer fluids represent an environmentally friendly blend of carefully selected materials.
Summary Summary Enhancer 923 Cement Agent
When blended into a specfically designed Halliburton cement system, Enhancer 923™ cement agent delivers the benefits of a lightweight cement with the unique ability to catalyze crystalline growth during curing for enhanced early compressive strength development. Additionally, it has the mechanical ability to sequester water in a manner that reduces API fluid loss while enhancing free water control.
Summary Summary DeepFX-L Additive
DeepFX-L additive is a single additive to address two challenges designed to enable logistics efficiencies and to be blended with cementing systems to help address both shallow water flow and gas migration conditions.
Summary Summary Fidelis™ and FO™ Stage Cementers Tested for Hydraulic Fracturing Durability
Three tests were successfully performed to qualify the Fidelis™ and FO™ stage cementers for use in the completion string where exposure to hydraulic fracturing operations occurs.
Summary Summary The HCS AdvantageOne™ offshore cementing system
The HCS AdvantageOne™ offshore cementing system is the next generation of cementing and well-control pumping system.
Summary Summary Non-Rotating Cementing Plugs
Halliburton’s innovative design includes plugs that have locking teeth on both the top and bottom plug and Super Seal II® float collars that allow plugs and casing equipment to lock together during drill-out.
Summary Summary Halliburton SurePlug Process™ Service
The Halliburton SurePlug Process™ service is a major advance in plugging technology. In fact, the process is patented. To date, the Halliburton SurePlug Process has been used to successfully set kickoff plugs on the first attempt in a variety of well conditions ranging from 1,500 ft to over 15,000 ft. Wellbore orientation has ranged from vertical to horizontal. Hole diameters have been from 6 in. to elliptical washouts over 3 ft.
Summary Summary Australian Cementing Trailer
Halliburton’s Australian Cementing Trailer is designed to reliably mix and pump cement fluid with minimal maintenance in oilfield environments and temperatures ranging from -31°F to 113°F (-35°C to 45°C).
Summary Summary FlowMentum Debris Management System
The FlowMentum™ debris management system is designed to be run in the lower most casing joint to trap wellbore cuttings and debris, preventing them from being swept into the casing string and causing damage.
Summary Summary Halad 568LM Fluid Loss Additive
Offshore cementing operations where logistics favor the use of a minimal suite of additives is the primary application of Halad®-568LM fluid-loss additive. It provides additional benefits, including improved slurry stability and, at the higher concentrations, some element of gas control.
Summary Summary HR®-14LM Cement Retarder
HR®-14LM cement retarder has a broad range of application and may be used for retarding both lead and tail slurries at temperatures between 80°F and 350°F (27°C–177°C).
Summary Summary SuperFill Surge Reduction Equipment
Running casing in the well at an operationally efficient speed without damaging the formation due to surge pressure is a long-standing challenge in the oil and gas industry. With Halliburton's SuperFill surge reduction equipment, a reliable auto-fill system, running speeds can be optimized while protecting the formation.
Summary Summary Life-of-Well Floating Equipment
Swell Technology systems and life-of-well floating equipment provide safe and reliable zonal isolation.
Summary Summary GasCon 469 LM Cement Additive
GasCon 469™ LM cement additive is a liquid cement additive designed to help increase slurry stability and control free water. It provides stable slurries across a wide density range.
Summary Summary TergoVis I Efficiency Fluid
Preparing the wellbore to receive cement while benefitting from efficient oil-based mud (OBM) recovery.
Summary Summary WellLock Resin System
WellLock resin system can function as a gas-impermeable secondary barrier to the primary cement sheath. It is also ideal for squeeze applications and microannuli repairs or for permanent plug and abandonment. It can be solid laden or used as a pure clean fluid.
Summary Summary Super Seal II® MR Valve Float Equipment (mechanically retained)
The unique design feature of the high temperature aluminum Super Seal II® MR poppet valve is a mechanically retained sealing element custom molded or the target environment. Utilizing the field proven technology of the Super Seal II® poppet valve engineering, Halliburton offers float valve options to meet 500°F (260°C) wells with valves capable of holding pressure of up to 10,000 psi (68.9 MPa).
Summary Summary Econolite-LM additive
The Econolite™– LM additive is primarily used as a cement slurry extender and stabilizer and can be used in a broad range of slurry densities at downhole temperatures up to 200°F (93°C). It is intended for offshore use where logistics and rig pit space limitations favor the use of a minimal suite of liquid additives.
Summary Summary Halad 447 LM Fluid Loss Additive
Halad®-447LM fluid-loss additive is an aqueous blend of synthetic polymers designed to provide fluid-loss control in cement slurries. At the higher concentrations, this additive can provide resistance to gas invasion across a wide range of conditions.
Summary Summary SentinelCem Cement
SentinelCem cement is specifically designed to cure losses and enable further drilling and help achieve zonal isolation by accomplishing intended top of the cement. The solution can be easily applied to losses varying from seepage to a complete loss of returns.
Summary Summary SuperFill Surge Reduction Equipment
Running casing in the well at an operationally efficient speed without damaging the formation due to surge pressure is a long-standing challenge in the oil and gas industry. With Halliburton's SuperFill surge reduction equipment, a reliable auto-fill system, running speeds can be optimized while protecting the formation.
Summary Summary FO Muli-Stage CS SDS
The FO (full-opening) multiple-stage cementer (or FO cementer) is used to place any number of stages of cement or other fluids outside a casing string at different selected points along the casing. This tool is operated manually and requires the use of a drill or tubing string and the sleeve positioner operating tools. These operating tools are available through Halliburton tool departments as rental items. In addition, they are also manufactured for customer purchase.
Summary Summary HR-12LM Cement Retarder
HR®-12LM cement retarder is a proprietary cement retarder designed for use in seawater-based cement slurries. This material is fully biodegradable and environmentally-friendly, containing no hazardous ingredients.
Summary Summary Halad-569LXM Fluid Loss Additive
Halad®-569LXM fluid loss additive is a liquid fluid-loss control additive for cement slurries that provides additional benefits, including improved slurry stability and strength enhancement, particularly for low density slurries. It is particularly useful offshore where logistics favor the use of a minimal suite of additives.
Summary Summary SentinelCem Cement Curing Severe and Total Losses
SentinelCem cement is specifically designed to cure losses and enable furtherdrilling and help achieve zonal isolation by accomplishing intended top of thecement.
Summary Summary SentinelCem™ Cement Cures Losses in Iraq Wells
Cement Treatment Saves Operators Millions of Dollars Annually
Summary Summary Overcoming Lost Circulation Across Brown Dolomite
An operator was incurring costs associated with loss of circulation events across the brown dolomite section of the Anadarko basin. These costs resulted from non-productive time, remedial operations expenses and fluid-replacement costs and ranged from $120,000-$170,000 (USD) on individual wells. Use of the Arx LCM package not only eliminated multi-stage cementing costs, but helped the operator avoid costs previously experienced due to loss of circulation events across the brown dolomite.
Summary Summary WellLock Resin provides well integrity to withstand forty-two fracturings stages
A casing leak was not successfully repaired with a casing patch. WellLock resin successfully addressed the leak path and after passing a pressure test, the well was completed with 42 fracture stages.
Summary Summary Permanent Plug Back - Setting a Plug through the BHA - New Zealand Offshore
Offshore New Zealand, an operator had drilled a pilot hole to gather petrophysical data. Once the data gathering was completed the pilot section needed to be permanently plugged, but accomplished without pulling out the BHA.
Summary Summary Rigless Micro-channel Remedation Using WellLock Resin
A customer in New South Wales, Australia had an onshore coal seam gas well that had undergone an unsatisfactory plug-to-abandon process by a third-party cementing services company. WellLock resin successfully sealed a very narrow micro-channel securing the well for permanent abandonment.
Summary Summary WellLife 684 Additive
WellLife® 684 additive is designed to increase the tensile strength of set cement without significantly decreasing the compressive strength.
Summary Summary The Family of WellLife Additives
WellLife® additives are used to modify the set-cement sheath’s mechanical properties with the goal of making it less brittle, more resilient and more elastic than conventional cement. Increasing the elasticity and resilience of the set cement sheath with the use of an additive in the WellLife family of additives helps eliminate or at least minimize damage caused by stresses induced during well activities.
Summary Summary Super Seal II SV Universal Blank Reamer Shoe
The Super Seal II SV Universal Blank Reamer Shoe is the latest addition to the Super Seal II system of floating equipment.
Summary Summary HR-4 Cement Retarder
HR®-4 cement retarder is a calcium lignosulfonate derived from wood. It can be used to retard all API classes of cement as well as Pozmix® cement.
Summary Summary Cabeza de Cementación InnerString (QUICK-PAK)
En espansol - data sheet for Cabeza de Cementación InnerString (QUICK-PAK). Quick-Pak Casing Head
Summary Summary EZ-FLO II Blending Additive
EZ-FLO II Blending Additive can improve the ability of typical pneumatic equipment to provide fluid-like flow for bulk materials. Cement particles treated with EZ-FLO II additive separate more easily.
Summary Summary The Isolizer™ centralizer
The Isolizer™ centralizer is an alternative solution to intercasing centralizer subs (ICCS) for tight-tolerance applications.
Summary Summary Intercasing Centralizer Sub (ICCS)
Halliburton has developed an intercasing centralizer sub (ICCS) that can be run as an integral part of almost any casing string. Bow-spring and rigid versions can be supplied in almost any casing size, grade, or thread and for use in the most challenging wellbore configurations.
Summary Summary Tuned Spacer E+ - A4
Tuned Spacer E+(TM) cement spacer for optimum drilling fluid removal helps meet the industry's need for more environmentally acceptable products. Tuned Spacer E+ was developed around the erodibility concept.
Summary Summary Halad-400L Fluid Loss Additive
Halliburton’s Halad®-400L fluid loss additive is a synthetic additive developed for temperatures from below 80°-400°F (27°-204°C) and for salt concentrations from zero percent to saturated salt concentrations. Halad-400L has been environmentally approved for use in the North Sea (exhibits biodegradability, low toxicity, and low bioaccumulation potential). This additive works without building viscosity and has a slightly dispersive character, thus the cement slurry remains thin. This additive is available as an aqueous liquid with a 22% activity.
Summary Summary ZoneSeal® Injection-Pump Skid Cementing Services
The pump system used in the ZoneSeal process has been cementing upgraded. The upgraded ZoneSeal injection pump skid is a compact, portable, automated pumping system used primarily with the cementing trailer and nitrogen unit for the ZoneSeal process.
Summary Summary The Isolizer™ centralizer
The Isolizer™ centralizer is an alternative solution to intercasing centralizer subs (ICCS) for tight-tolerance applications.
Summary Summary Tuned Spacer E+
Tuned Spacer E+(TM) cement spacer for optimum drilling fluid removal helps meet the industry's need for more environmentally acceptable products. Tuned Spacer E+ was developed around the erodibility concept.
Summary Summary Dual Spacer Surfactant A
Dual Spacer Surfactant A system is to be used as a supplementary additive when oil-based muds are displaced. It is designed to reduce interfacial viscosity and preferentially water-wet the pipe and formation to promote better cement bonding.
Summary Summary Bottomhole Kickoff Assembly (BHKA) Tool
Halliburton bottomhole kickoff assembly (BHKA) tools feature a special design that allows for placement of a competent cement plug for kickoff, sidetrack, and plug and abandonment purposes on the first attempt. The assemblies can be used in vertical, deviated, and highly deviated applications. Centralizers may be necessary in larger wellbore configurations.
Summary Summary D-Air 3000 and D-Air 3000L defoamers
D-Air 3000 and D-Air 3000L defoamers help control foaming of cement slurries.
Summary Summary Dual Spacer Surfactant A
Dual Spacer Surfactant A system is to be used as a supplementary additive when oil-based muds are displaced. It is designed to reduce interfacial viscosity and preferentially water-wet the pipe and formation to promote better cement bonding.
Summary Summary Protech DRB and Protech CRB Centralizer Service
Protech DRB and Protech CRB are Halliburton product lines providing composite technology centralizers through a licensed agreement with Eni S.p.A.* Protech centralizers are currently provided through three facilities located in Ravenna, Italy; Aberdeen, Scotland; and Houston, Texas.
Summary Summary Halad-400L Fluid Loss Additive
Halliburton’s Halad®-400L fluid loss additive is a synthetic additive developed for temperatures from below 80°-400°F (27°-204°C) and for salt concentrations from zero percent to saturated salt concentrations. Halad-400L has been environmentally approved for use in the North Sea (exhibits biodegradability, low toxicity, and low bioaccumulation potential). This additive works without building viscosity and has a slightly dispersive character, thus the cement slurry remains thin. This additive is available as an aqueous liquid with a 22% activity.
Summary Summary SoluCem Cement in Horizontal Shale Wells Enhances Fracture Efficiency
Horizontal wells are normally fracture stimulated in multiple stages to help increase production. Limited entry perforating is used to achieve stimulation over a wide interval. Cementing horizontal shale wells using SoluCem™ cement provides significant benefits.
Summary Summary Tuned® Spacer V
Tuned® Spacer V was developed for use at temperatures to 485-degrees Fahrenheit (251.7-degrees Celsius). It is an optimized rheology spacer that meets the challenge of high bottomhole temperatures.
Summary Summary Continuous Metering System (CMS)
The continuous metering system (CMS) liquid-additive metering system is used to meter all types of liquid additives. With correct calibration and maintenance, the CMS system accurately meters both low-viscosity and high-viscosity additives. This additive system can be retrofitted to operate with conventional recirculating mixer (RCM®) systems on any cementing skid. It delivers liquid additives to the mixing water at a rate proportionate to the mixing rate.
Summary Summary High Wiping Efficiency (HWE®) Cement Plugs
Halliburton has designed a whole new class of cementing plugs to meet the requirements of deeper, hotter and more hostile reservoirs. The Halliburton HWE plugs meet this challenge with improved performance and the best value available today.
Summary Summary Formation Packer Shoes-H07160
Halliburton formation packer shoes are installed on the bottom of casing in applications where casing will be set on top of a producing formation. In addition to the standard packer shoe line offered by Halliburton, premium threads are available for specific customer applications. Typically, formation packer shoes are used to pack off an open hole below the casing to help protect low pressure formations against cement contamination.
Summary Summary FineCem Cement
FineCem™ cement can be used on squeeze jobs where /ne-particle cement blends are required. In squeeze cementing operations, this cement blend can be applied where conditions make it desirable for the cement slurry to penetrate areas previously inaccessible to conventional cement slurry, such as “tight” casing leaks, gravel packs, small fractures, channels, or microannuli. FineCem™ cement slurries can also be used in slimhole conditions for production strings.
Summary Summary LiquiLite™ Cement Additive
LiquiLite™ cement additive enables efficient delivery of Tuned® Light cement in offshore and remote locations by eliminating bulk blending logistics and allowing for tailoring of slurry density on location.
Summary Summary Casing Equipment Installation Aids
Pipe dope is used to help prevent galling while the joints are made up in a casing string. A solvent is used to clean casing pins and box threads from dirt and debris before applying the pipe dope compound. Halliburton Weld A™ thread compound has proved superior to tack welding as an aid in locking threaded connections tightly and permanently on any casing string, saving time and money.
Summary Summary Foamer 760 Foamer / Stabilizer
Foamer 760™ foamer/stabilizer is a single-component cement foamer/stabilizer that can be used in fresh water, seawater, and salt slurries.
Summary Summary Omega™ HWE® Cementing Plug
The Omega HWE cementing plugs were designed to incorporate two proven technologies for the purpose of providing superior wiping efficiency and fluid separation for even the most demanding jobs.
Summary Summary Super CBL™ & Super CBL™ EXP Additives
Super CBL™ and Super CBL™ EXP additives are plastic-state additives designed to help compensate for cement shrinkage. Cement shrinkage is a combination of the volume reduction caused by the chemical hydration process of cement and the fluid loss to the formation.
Summary Summary ShaleCem Cement and Latex 3000 additive
Halliburton’s ShaleCem™ cement system addresses the speci:c demands of the Haynesville Shale; and when the newest latex additive advancement from Halliburton, Latex 3000™ cement additive, is included in the blend, ShaleCem cement has high-temperature suspension properties (up to 400° F or 204.4° C), corrosion resistance and excellent ;uid loss control.
Summary Summary Casing Equipment Installation Aids (A4 Version)
Pipe dope is used to help prevent galling while the joints are made up in a casing string. A solvent is used to clean casing pins and box threads from dirt and debris before applying the pipe dope compound. Halliburton Weld A™ thread compound has proved superior to tack welding as an aid in locking threaded connections tightly and permanently on any casing string, saving time and money.
Summary Summary Cal-Seal™ 60 Cement Accelerator - A4
Cal-Seal™ 60 accelerator is blended with Portland cements. It helps shorten the slurry’s setting time and can improve its expansive properties.
Summary Summary Bentonite (Halliburton Gel)
Bentonite (Halliburton Gel) is a colloidal clay mineral composed primarily of smectite. It may also contain accessory minerals, such as quartz, feldspar, and calcite. In fresh water, bentonite swells to approximately 10 times its original volume.
Summary Summary Calcium Chloride (CaCl2) Accelerator
Calcium chloride (CaCl2) additive is the most widely used and accepted accelerator for all classes of cement. It is widely used in shallow, low-temperature formations to speed the setting of cement slurries.
Summary Summary Gilsonite Lost Circulation Additive - A4
Gilsonite additive is an asphaltene hydrocarbon in granular form. Its particle size varies between 4- and 100-mesh. Gilsonite additive is commonly used to control lost circulation.
Summary Summary Barite Heavyweight Additive
Barite heavyweight additive is a barium sulfate material used to weight drilling muds and cement slurries. Typically, 85 to 90% of barite additive will pass through a 325-mesh sieve.
Summary Summary CFR-6 Cement Friction Reducer (Russian)
CFR-6 Cement Friction Reducer in Russian
Summary Summary Bentonite Cement Diesel Oil Slurry (BCDO)
Bentonite cement diesel oil (BCDO) slurry is a blend of bentonite and cement mixed with diesel oil. This slurry forms a thick,paste-like material when contacted by water or water-based drilling muds, making an effective lost-circulation material. Granular, flaked, or fibrous lost-circulation additives can be used with BCDO slurries.
Summary Summary Gilsonite Lost Circulation Additive
Gilsonite additive is an asphaltene hydrocarbon in granular form. Its particle size varies between 4- and 100-mesh. Gilsonite additive is commonly used to control lost circulation.
Summary Summary Halad®-413 Additive A-4
Halad®-413 additive is a synthetic polymer that helps control filtrate loss in all cement conditions
Summary Summary MicroBond™ - A4
Microbond expanding additive for cement is a crystalline-growth cement additive that provides low-temperature expansion.
Summary Summary Stabilizer 434B Latex Stabilizer
Stabilizer 434B latex stabilizer helps prevent gas migration in Latex 2000 cement, a low fluid-loss cementing system. Latex 2000 cement is a water-internal, oil-external emulsion; in the presence of water, the system tends to come out of emulsion, losing its effectiveness against gas migration. Stabilizer 434B latex stabilizer helps prevent the de-emulsification of Latex 2000 cement.
Summary Summary Dual Spacer System ,CFR-6 Cement Friction Reducer
Dual Spacer system's primary application is as a low-viscosity, weighted spacer (flush) for primary and secondary cementing operations. Dual Spacer system can also be designed to displace water- and oil-based muds.
Summary Summary Perlite Cement Additive
Perlite cement additive is a light, granular material made from crushed volcanic rock. Its primary use is to lower the density of cement slurries.
Summary Summary Spherelite™ Cement Additive
When combined with the proper type of cement, Spherelite™ cement additive can provide slurry densities of 9.5 to 12 lb/gal. The 24-hour compressive strength of these slurries can range from 100 to 700 psi at curing temperatures of 28° to 140°F (-2.2° to 60°C).
Summary Summary Potassium Chloride
Formation clays and shales swell in the presence of fresh water, adversely affecting production and zonal isolation. Potassium chloride (KCl) helps prevent this swelling.
Summary Summary MicroBond™
Microbond expanding additive for cement is a crystalline-growth cement additive that provides low-temperature expansion.
Summary Summary SCR-500L High-Temperature Retarder
SCR-500L™ high-temperature retarder is a synthetic material designed for use in slurries exposed to high bottomhole circulating temperatures (BHCTs) ranging from 200° to 330°F (93° to 165°C).
Summary Summary Permafrost® E
Permafrost® E cement is a special blend of cementing materials formulated for setting conductor pipe in extremely cold conditions.
Summary Summary Halad®-600 E+ Additive -A4
Halad®-600 E+ additive helps control fluid loss in environmentally sensitive areas.
Summary Summary Halad®-413 Additive
Halad®-413 additive is a synthetic polymer that helps control filtrate loss in all cement conditions.
Summary Summary CleanBore A Surfactant - A4
The CleanBore system consists of four fluids that help provide quick and effective cleanout of oil-based mud (OBM) so that perforating or production in completion operations can begin.
Summary Summary Halad®-413 Additive (Russian)
Halad®-413 -- Russian
Summary Summary MicroBond™ (Russian)
MicroBond(TM) additive sales data sheet in Russian
Summary Summary Spherelite™ Cement Additive A-4
When combined with the proper type of cement, Spherelite™ cement additive can provide slurry densities of 9.5 to 12 lb/gal. The 24-hour compressive strength of these slurries can range from 100 to 700 psi at curing temperatures of 28° to 140°F (-2.2° to 60°C).
Summary Summary Super Flush
Super Flush spacer is a reactive fluid flush used before primary cementing to help improve mud displacement and cement bonding. It also helps control downhole fluid loss.
Summary Summary Stabilizer 434B Latex Stabilizer A-4
Stabilizer 434B latex stabilizer helps prevent gas migration in Latex 2000 cement, a low fluid-loss cementing system. Latex 2000 cement is a water-internal, oil-external emulsion; in the presence of water, the system tends to come out of emulsion, losing its effectiveness against gas migration. Stabilizer 434B latex stabilizer helps prevent the de-emulsification of Latex 2000 cement.
Summary Summary Halad®-600 E+ Additive
Halad®-600 E+ additive helps control fluid loss in environmentally sensitive areas.
Summary Summary Flo-Chek® A
Flo-Chek® A additive is a colorless liquid that can be used for preparing the Flo-Chek process.
Summary Summary SA-541™ Suspending Aid
When cement slurries containing SA-541™ suspending aid are heated to temperatures greater than 150°F (65.5°C), the material yields to suspend downhole solids.
Summary Summary Dual Spacer (Russian)
Dual Spacer in Russian
Summary Summary Halad®-600 E+ Additive (Russian)
Halad®-600 E+ -- Russian
Summary Summary Calcium Chloride (CaCl2) Accelerator (Russian)
Хлористый кальций (CaCl2) представляет собой наиболее широко применяемую и признанную добавку, ускоряющую схватывание цементных растворов всех классов. Этот продукт широко используется в характеризующихся неглубоким залеганием и пониженной температурой пластах как средство ускорения схватывания и затвердевания тампонажных растворов.
Summary Summary Dual Spacer Mixing Aid
The Dual Spacer™ Mixing Aid additive is a light brown liquid gel disposed in a low-toxicity oil.
Summary Summary Dual Spacer E Spacer (Russian)
Dual Spacer E spacer functions as a low-viscosity, weighted flush for primary and secondary cementing operations.
Summary Summary Halad®-23 Additive (Russian)
Halad®-23 -- Russian
Summary Summary Dual Spacer System A4
Dual Spacer system's primary application is as a low-viscosity, weighted spacer (flush) for primary and secondary cementing operations. Dual Spacer system can also be designed to displace water- and oil-based muds.
Summary Summary SA-541™ Suspending Aid - A4
When cement slurries containing SA-541™ suspending aid are heated to temperatures greater than 150°F (65.5°C), the material yields to suspend downhole solids.
Summary Summary CleanBore A Surfactant
The CleanBore system consists of four fluids that help provide quick and effective cleanout of oil-based mud (OBM) so that perforating or production in completion operations can begin.
Summary Summary Attapulgite
Attapulgite suspending agent is a colloidal clay mineral composed primarily of magnesium silicate, silica, and crystalline quartz. In salt water, attapulgite suspending agent swells to approximately 10 times its original volume.
Summary Summary Halad®-23 Additve A-4
Halad®-23 additive is a high-temperature fluid-loss control agent that functions effectively in freshwater and saltwater slurries.
Summary Summary Pozmix A Cement Additive
Pozmix® A pozzolanic cement additive (fly ash) is made from burned coal. It is a major component in Pozmix® cement.
Summary Summary Micro Fly Ash
Micro Fly Ash cement component is a small-particle fly ash developed as a supplement for Micro Matrix cement slurries.
Summary Summary Halad®-23 Additve
Halad®-23 additive is a high-temperature fluid-loss control agent that functions effectively in freshwater and saltwater slurries.
Summary Summary Cal-Seal™ 60 Cement Accelerator
Cal-Seal™ 60 accelerator is blended with Portland cements. It helps shorten the slurry’s setting time and can improve its expansive properties.
Summary Summary Bentonite (Halliburton Gel) A-4
Bentonite (Halliburton Gel) is a colloidal clay mineral composed primarily of smectite. It may also contain accessory minerals, such as quartz, feldspar, and calcite. In fresh water, bentonite swells to approximately 10 times its original volume.
Summary Summary Bentonite Diesel Oil Slurry (BDO)
When mixed with water-free diesel, bentonite forms a semisolid slurry (BDO) that helps seal lost-circulation zones. BDO is used during drilling when muds containing fibrous, granular, and flaked materials are ineffective.
Summary Summary FLECS™ Control System
A field-proven system to help ensure cementing success
Summary Summary HR-800™ Cement Retarder
HR-800™ non-lignin cement retarder is capable of retarding cement at temperatures between 80 - 220°F (20 - 105°C).
Summary Summary FWCA™ Free Water Cement Additive - A4
FWCA™ free-water cement additive is a solidssuspending agent.
Summary Summary NF-6™ Defoamer
NF-6™ defoamer helps alleviate foaming problems in troublesome slurries, such as those containing salt, Halad®-413, or latexes, or in slurries with high yield points. By reducing foaming problems, NF-6 defoamer allows operators to mix slurries to specifically designed
Summary Summary Halad®-344 - A4
Halad®-344 fluid-loss additive is especially useful in lightweight cementing compositions that often have long thickening times. The material is nonretarding, thus making good compressive strength development possible at low temperatures. Halad®-344 additive performs as well in seawater as in fresh water, and is compatible with retarders, dispersants, and calcium chloride (CaCl2).
Summary Summary MicroBond HT™ Cement Additive
MicroBond HT™ is an expansive cement additive developed for use at temperatures above 170°F.
Summary Summary FWCA™ Free Water Cement Additive
FWCA™ free-water cement additive is a solidssuspending agent.
Summary Summary Econolite Additive (Russian)
Russian version of sales data sheet on Econolite
Summary Summary Halliburton LIGHT Cement (HLC)
Halliburton LIGHT cement (HLC) is versatile, economical filler cementing composition for applications requiring low or variable slurry density. HLC can provide a high-yield, low-cost slurry for permanently sealing zones where cement slurry design factors are not critical. When combined with highsealing Gilsonite, HLC can be used for lost circulation applications. Features
Summary Summary MICROSAND Cement Additive
MICROSAND cement additive is a high-purity crystalline silica ground to a uniform particle-size distribution of 5 microns.
Summary Summary VersaSet Thixotropic Additive
VersaSet additive is a thixotropic additive designed to help control free water, promote early strength development, prevent cement fallback, and control fluid migration during primary cementing applications. Applications
Summary Summary Dual Spacer™ B Surfactant
Dual Spacer™ B surfactant is commonly used in water-based spacers to water-wet casing and help displace oil-based drilling fluids from the wellbore.
Summary Summary HR®-6L Cement Retarder - A4
HR®-6L retarder is a 40% solution of a chemically modified lignosulfonate. It can be used to retard all API classes of cement as well as Pozmix® cement.
Summary Summary Suspend HT™ Additive
Suspend HT™ additive is a suspending aid and free-water control agent. It can be used in temperatures from 250° to 400°F (121° to 204°C).
Summary Summary Sodium Chloride (NaCl) Accelerator - A4
Sodium chloride (NaCl), commonly known as salt, can be used in low concentrations to accelerate the setting of cement. In high concentrations, NaCl retards the setting of most cements, improves bonding of cement to shales, and minimizes damage in zones sensitive to fresh water. A defoamer should be added to dry blends or to mixing water to minimize foaming and air entrainment.
Summary Summary MicroBond M™ Cement Additive - A4
MicroBond M™ is a chemical expansive additive developed for use at temperatures from 130° to 210°F.
Summary Summary NF-6(TM) Defoamer - A4
NF-6™ defoamer helps alleviate foaming problems in troublesome slurries, such as those containing salt, Halad®-413, or latexes, or in slurries with high yield points. By reducing foaming problems, NF-6 defoamer allows operators to mix slurries to specifically designed densities.
Summary Summary GasStop™ HT (Russian)
Russian version of GasStop HT data sheet
Summary Summary HR®-6L Cement Retarder (Russian)
Russian version of sales data sheet on HR-6L
Summary Summary GasStop™ HT A-4
GasStop HT additive is a cement polymer that helps prevent gas migration.
Summary Summary HR®-5 Cement Retarder
HR®5 additive is a chemically modified lignosulfonate that retards the setting of cement. It is designed for use in wells with recirculating temperatures between 125° and 206°F (290°F static).
Summary Summary NF-6(TM) Defoamer (Russian)
Russian version of NF-6 defoamer sales data sheet
Summary Summary Latex 2000
Latex 2000 liquid additive is designed to impart excellent fluid-loss control, high-temperature suspension properties, and acid resistance to cement slurries. Latex 2000 additive is successful across a wide range of well conditions (Ambient to 380°F circulating temperature) and is used in both primary casing cementing operations and remedial squeeze work.
Summary Summary Suspend HT™ Additive -A4
Suspend HT™ additive is a suspending aid and free-water control agent. It can be used in temperatures from 250° to 400°F (121° to 204°C).
Summary Summary Latex 2000 (Russian)
Latex 2000 liquid additive is designed to impart excellent fluid-loss control, high-temperature suspension properties, and acid resistance to cement slurries. Latex 2000 additive is successful across a wide range of well conditions (Ambient to 380°F circulating temperature) and is used in both primary casing cementing operations and remedial squeeze work.
Summary Summary Econolite Additive
Halliburton's Econolite additive is used in oilwell cementing to increase volume, decrease density, provide a detergent action, and reduce costs; the resulting slurries are widely used as filler cement. The additive is dry-blended, in finely ground powder form, with API cement Classes A, C, H, and Halliburton LIGHT cement at the rate of 1 to 3% by weight. Econolite additive cannot be used with calcium chloride (accelerator).
Summary Summary Dual Spacer™ B Surfactant - A4
Dual Spacer™ B surfactant is commonly used in water-based spacers to water-wet casing and help displace oil-based drilling fluids from the wellbore.
Summary Summary MicroBond HT™ (Russian)
MicroBond HT Sales Data sheet in Russian.
Summary Summary MicroBond M™ Cement Additive
MicroBond M™ is a chemical expansive additive developed for use at temperatures from 130° to 210°F.
Summary Summary Econolite Additive A-4
Halliburton's Econolite additive is used in oilwell cementing to increase volume, decrease density, provide a detergent action, and reduce costs; the resulting slurries are widely used as filler cement. The additive is dry-blended, in finely ground powder form, with API cement Classes A, C, H, and Halliburton LIGHT cement at the rate of 1 to 3% by weight. Econolite additive cannot be used with calcium chloride (accelerator).
Summary Summary GasStop™ HT
GasStop HT additive is a cement polymer that helps prevent gas migration.
Summary Summary Halad®-344
Halad®-344 fluid-loss additive is especially useful in lightweight cementing compositions that often have long thickening times. The material is nonretarding, thus making good compressive strength development possible at low temperatures. Halad®-344 additive performs as well in seawater as in fresh water, and is compatible with retarders, dispersants, and calcium chloride (CaCl2).
Summary Summary Halad®-344 (Russian)
Halad®-344 fluid-loss additive in the Russian language
Summary Summary MicroBond M (Russian)
Продукт MicroBond M™ представляет собой химическую добавку расширяющего действия, разработанную для применения в диапазоне температур от 130 до 210°F.
Summary Summary Super CBL (Russian)
Super CBL additive sales data sheet in Russian.
Summary Summary Dyckerhoff Cement
Dyckerhoff cement is used as a basic well cement. Available in moderate sulfate resistant (MSR) and high sulfate-resistant (HSR) grades, it contains no additions other than calcium sulfate and/or water blended with clinker.
Summary Summary MicroBond HT™ Cement Additive - A4
MicroBond HT™ is an expansive cement additive developed for use at temperatures above 170°F.
Summary Summary Sodium Chloride (NaCl) Accelerator
Sodium chloride (NaCl), commonly known as salt, can be used in low concentrations to accelerate the setting of cement. In high concentrations, NaCl retards the setting of most cements, improves bonding of cement to shales, and minimizes damage in zones sensitive to fresh water. A defoamer should be added to dry blends or to mixing water to minimize foaming and air entrainment.
Summary Summary Hi-Dense® No. 3 and No. 4 Weight Additives
Halliburton's Hi-Dense® weight additives can be added to cement slurries to restrain high formation pressure, increase slurry density, and improve mud displacement. The two available grades of Hi-Dense additives are classified according to mesh size. These hematite-ore additives can be mixed to form 26-lb/gal slurries with an effective specific gravity of 3.15. Halliburton markets these products as Hi-Dense No. 3 and Hi-Dense No. 4.
Summary Summary Latex 2000 A-4
Latex 2000 liquid additive is designed to impart excellent fluid-loss control, high-temperature suspension properties, and acid resistance to cement slurries. Latex 2000 additive is successful across a wide range of well conditions (Ambient to 380°F circulating temperature) and is used in both primary casing cementing operations and remedial squeeze work.
Summary Summary Resin System Facilitates Shut Off of Difficult Gas Well
An advanced, solids-free epoxy resin was applied for gas shut-off in a difficult-to abandon well in Colombia. The versatile system allowed the well to be brought back into line with governmental regulations.
Summary Summary Shale oil and a problem well-stated
The South Cana portion of The Woodford Shale presented NewField exploration worked to enhance wellbore integrity by striving to address risk of annular pressure.
Summary Summary E&P: Using buoyancy-assisted casing equipment to extend lateral reach
A major challenge in lengthy horizontal or highly deviated wellbores is running the casing string to depth. Drag between the casing string and the formation can often exceed the load capacity of the casing hook, preventing tools from reaching optimal setting depth.
Summary Summary Fresh Approach Pays Off -- Innovation of WellLock resin system
This article originally ran in the "Innovators" section of the March 2015 issue of Canada's "New Technology" Magazine. It features the development work toward what became WellLock resin by Dr. P. Jones.
Summary Summary Tuned Spacer™ Material
Tuned Spacer™ Material is a cost-effective, water-based spacer that can provide variable viscosity and optimized rheology. For material #'s 12219 (blend) and 100009902 (dispersant). Used in Congo April 2018
Summary Summary CleanBore B™
The CleanBore system consists of four fluids that help provide quick and effective cleanout of oil-based mud (OBM) so that perforating or production in completion operations can begin.
Summary Summary Halad®-567 Additive - A4
Halad®-567 fluid-loss additive is made from synthetic polymer technology. It is available as a powder or a 20% solution (Halad®-567L additive).
Summary Summary CFR-3 Cement Friction Reducer A-4
Halliburton CFR-3 friction reducer helps reduce the apparent viscosity and improve the rheological properties of a cement slurry. As a result, turbulent flow can be achieved at lower pumping rates, which results in reduced friction pressure during pumping.
Summary Summary Calcium Chloride (CaCl2) Accelerator - A4
Calcium chloride (CaCl2) additive is the most widely used and accepted accelerator for all classes of cement. It is widely used in shallow, low-temperature formations to speed the setting of cement slurries.
Summary Summary CFR-3 Cement Friction Reducer (Russian)
Russian version of sales data sheet on CFR-3
Summary Summary Flo-Chek® Service
Flo-Chek® Service consists of a two-fluid system used for sealing lost-circulation zones and squeezing off subsurface water. This process is a highly effective squeezing method that can control underground water flows and seal lostcirculation intervals. It can be used for both freshwater and brine flows.
Summary Summary Pol-E-Flake™ Lost Circulation Additive
Pol-E-Flake™ additive is an inert lost circulation product that can be used in any common drilling fluid or cement system. It consists of polyester film (non-cellophane) sized to 3/8 in.
Summary Summary Halad®-9
Halad®-9 additive is a blend of a cellulose derivative and a dispersant. It provides fluid loss control in all API classes of cement.
Summary Summary Halad®-766
Halad®-766 fluid-loss additive can also be used as a retarder. Halad-766 fluid-loss additive is extensively used to retard foam slurries without reducing viscosity. Halad-766 fluid-loss additive is a derivitatized cellose that can be used for fluid loss and retardation in all API cement classes as well as Pozmix® cement. The tables below list the product specifications and part numbers for Halad-766 fluid-loss additive.
Summary Summary Halad®-300L Additive
Halad®-300L fluid-loss additive is an alternative to Halad®-200 additive.
Summary Summary D-Air 4000L™ Cementing Defoamer
D-Air 4000L solids-free defoamer and de-air entraining additive does not produce any of the settling issues normally found with cementing defoamers of this type.
Summary Summary