Drilling Waste Management Solutions

Reservoir Fluids Solutions

Custom Drilling Waste Management Solutions

We are not a one size fits all solids control equipment provider. To deliver totally customized waste management solutions, we leverage a broad portfolio of modular or mobile technologies to deploy unique configurations tailored to your operating needs. From centrifuges to cuttings dryers, vacuums and conveyance systems to thermal processing units, we have the right products to tackle any challenge, and the expertly trained personnel to implement the ideal solution.

Maximize Drilling Efficiency

By adopting a flexible approach to operations, technology and logistics, we are able to balance the complexities of regulatory and economic conditions to design and deploy the best-fit waste management solution that maximizes drilling efficiency.

Environmental Leadership

We deliver waste management solutions designed to meet or exceed the environmental regulations for your projects. Waste reductions, fluids reuse, and advanced cuttings treatments all help limit the amount of waste transportation and reduce your risk for environmental incidents.

Reduce Overall Costs

Efficient solutions help reduce waste treatment time, transportation and handling, and help alleviate logistics challenges. Our customized waste management solutions are designed to provide these efficiencies and help you reduce the overall cost of your well operations.

Drilling Waste Management Solutions

Filter By  
Количество записей на странице Show     results per page
  TitleНазвание  DateДата
Summary Summary Waste Treatment and Disposal Solutions Sales Data Sheet
Baroid Waste Treatment and Disposal Solutions Sales Data Sheet
Summary Summary Waste Management Solutions and Services Sales Data Sheet
Baroid Waste Management Solutions and Services Sales Data Sheet
Summary Summary Hi-Flow DE Filtration Unit
Halliburton Baroid's Hi-Flow DE Filtration Unit
Summary Summary Filtration Services Sales Data Sheet
Baroid Filtration Services Sales Data Sheet
Summary Summary Venezuela: Halliburton's SupaVac SV400 Pumping System Helped Clean Mud Pits 65% Faster, Saving US$ 6.3 MM of Rig Time
The challenge was to provide a waste management solution that would accelerate the cleaning operation and significantly reduce downtime.
Summary Summary Baroid Slurry Handling System Provides Cost-Effective Waste Disposal Solution
System enables operator to achieve zero discharge while drilling in environmentally sensitive area
Summary Summary BaraH2O™ Slop Treatment Unit Delivers Cost Reduction and Operational Efficiencies
System delivers significant cost savings and operational efficiencies
Summary Summary BaraCRI™ Cuttings Reinjection System Saves Operator USD 120,000 Per Month
CRI Solution enables operator to avoid costly skip-and-ship cuttings processing
Summary Summary BaraPhase™ Thermomechanical Cuttings Cleaner (TCC) - Sales Data Sheet
Halliburton Baroid’s BaraPhase™ thermomechanical Cuttings Cleaner (TCC) unit is specially designed for the processing of oil contaminated drilling waste such as typical drill cuttings, slop-mud and spent drilling mud.
Summary Summary Vertical Cuttings Dryer and Centrifuge - Sales Data Sheet
The Baroid V-133 Cuttings Dryer has been proven to provide a dramatic reduction in drill solids waste discharge and to help maximize the recovery of synthetic-, oil-, or ester-based drilling fluids.
Summary Summary Baroid V-133 and Baroid V-71 Cuttings Dryers - Sales Data Sheet
2.4MB The Baroid V-133 Cuttings Dryer has been proven to provide a dramatic reduction in drill solids waste discharge and to help maximize the recovery of synthetic-, oil-, or ester-based drilling fluids.
Summary Summary ENVIRO-FIX™ Solids Stabilization Process - Sales Data Sheet
3.2MB Drilled cuttings and similar materials are often physically unstable and unsuitable for landfill and difficult to transport and contain. If improperly managed, drilled cuttings may expose the operator to environmental liability. In these strictly regulated times, cuttings can only be disposed of once it has been determined that the material poses no threat to the environment.
Summary Summary ENVIRO-FLOC® Drilling Fluid Dewatering System - Sales Data Sheet
The ENVIRO-FLOC® Drilling Fluid Dewatering System uses flocculation and coagulation to remove suspended solids and fluid additives from water-based fluids, allowing the treated water to be recycled at the rig site as drill water or wash water.
Summary Summary SupaVac™ SV400 Pumping System - Sales Data Sheet
The SupaVac SV400 unit is a compact, air-operated, vacuum recovery and pressure discharge pump. The robust system is designed to operate in hazardous locations, safely collecting and pumping materials such as drill cuttings, tank bottoms, heavy crude sludge and sand slurries.
Summary Summary Brunei: Baroid's Mix On The Fly (MOTF) System Allows Continuous Drilling With Limited Pit Volume
This customer called upon Halliburton Baroid to find a solution for mixing high volumes of Dynamic Kill Drilling (DKD) mud with limited pit volume of 655m³.
Summary Summary Kazakhstan: Innovative Waste Management System from Baroid Surface Solutions Helps Assure Environmental Compliance and Saves Millions
For more than four years the TCC system has operated successfully for this operator, handling up to three drilling rig operations, and treating more than 36,000m³ of oil based drill cuttings.
Summary Summary Mobile VCD Saves Operator over $300K in OBM Recovery and Waste Volume Reduction
Mobile VCD Saves Operator over $300K in OBM Recovery and Waste Volume Reduction
Summary Summary Operator Recovers 500+ bbl OBM, Saves $70K with Mobile Vertical
An Operator Recovers 500+ bbl OBM, Saves $70K with Mobile Vertical Cuttings Dryer
Summary Summary Offshore Slop Treatment Unit Reduces Volume Sent
Offshore Slop Treatment Unit Reduces Volume Sent to Shore by over 90% on Two NCS Operations
Summary Summary BaraG-Force™ V133 Vertical Cuttings Dryers save operator over $940,000
BaraG-Force™ V133 Vertical Cuttings Dryers help major operator save over $940,000 in deepwater Gulf of Mexico project
Summary Summary HCB Video
HCB Tanks Video
Summary Summary HCB Animation
HCB Tanks Animation
Summary Summary BaraH2O™ Slop Treatment Unit Delivers Cost Reduction and Safer Operations
A major operator in the UK North Sea was generating large volumes of slop fluids, which were sent to shore for processing and disposal. The goal was to reduce the volume of slop fluids and the associated costs.
Summary Summary Thermal Processing Systems - Sales Data Sheet
Baroid Fluid Services offers Range of Thermal Desorption Solutions forOnshore and Offshore Operations: Equipment and Drilling Fluids
Summary Summary Kazakhstan: Baroid Drilling Waste Management Service Helped Operator Net $1.39M in Base Oil Reuse Savings and Ensure Environmental Compliance in Remote Land Operation
An operator’s waste managementstrategy needed revision to help ensure operations continued in a safe and environmentally acceptable manner.
Summary Summary Vacuum-Feed Vertical Cuttings Dryer Simplifies Operations, Saves Costs
BARAG-FORCE™ System saves operator more than USD 25K per well in Shale play
Summary Summary BaraPhase™ TCC and BaraStream™ HCB™ Tanks Eliminate Skip-and-Ship Issues
Baroid Solutions enable operator to finish project six months ahead of schedule
Summary Summary Waste Treatment and Disposal
Environmental concerns have made the effective management of drilling-related waste a priority at wellsites throughout the world.
Summary Summary Drilling Waste Management Solutions
To deliver totally customized waste management solutions, our equipment is designed in a modular format enabling the implementation of unique configurations that fit a wide range of operating needs.
Related Information

Related Information Дополнительная информация