Halad®-200L Fluid Loss Additive

Developed as an alternative for Halad®-100A additive

Halad-200L additive can help control fluid loss in a wide variety of conditions. This additive viscosifies the slurry but does not retard the cement set. It can be used for bottomhole circulating temperatures(BHCTs) as low as 100°F (37.8°C) and higher than 400°F(204.4°C). It is salt-tolerant up to saturation.

Halad-200L additive can provide the following benefits:

  • A 7.5% active aqueous liquid.
  • Controls fluid loss In Class G and Class H cement, in the temperature range from 100°F (37.8°C) to at least 400°F (204.4°C), with moderate slurry rheology and no retardation effect. Slightly retards at temperatures lower than 100°F (37.8°C).
  • Compatible with most Halliburton additives.
  • Salt-tolerant; helps control fluid loss in seawater up to salt-saturated slurries.
  • At 100° and 239°F (37.8° and 115°C), zero gel time is relatively long.

Halad-200L Fluid Loss Additive—Product Specifications

Part No. 101315806 (Bulk)


101315802 (1 qt.) Form Amber Liquid
101315803 (5 gal) Odor& Slight
101315804 (55 gal) Specific Gravity 1.02
101315805 (Haltank)


Comments? Questions? Need More Information?   

Halad®-200L Fluid Loss Additive

Filter By  
Количество записей на странице Show     results per page
  TitleНазвание  DateДата
Related Information

Related InformationДополнительная информация