MaxBHA™ Design Software

     

Sperry Drilling services has added MaxBHA™ software to the Sperry Drilling optimization software suite, transforming the art of BHA design into science. MaxBHA software provides a state-of-the-art solution for improving well placement, drilling performance and tool reliability through real-time modeling of critical rotary speed and sag correction.

Directional Drilling Software

 

 

 

 

 

 

 

 

 

 

 

MaxBHA™ Design Software

Filter By  
Количество записей на странице Show     results per page
  TitleНазвание  DateДата
Summary Summary How Halliburton beat a client’s drilling average by 43%, saving them more than $200,000.
Integrated bit, fluid and drilling services allowed Halliburton to model, measure and optimize continuously, saving 3.6 days.
Summary Summary India: Optimized Drilling Performance Delivers 99.68 Percent Operating Efficiency and Helps Operator Save US$ One Million Sign in required
Over the course of more than 50 extended reach wells drilled in water depths from 45 m to 75 m (148 - 246 ft), the customer’s primary challenge was to drill the 12 ¼-inch sections at optimum rates of penetration (ROP) while ensuring efficient hole cleaning through long shale sections using a synthetic oil-based mud system.
Summary Summary Gulf of Mexico: Comprehensive Halliburton Solution Includes World’s Deepest Formation Pressure Test in Deepwater Extended Reach Well Drilled around a Salt Structure Sign in required
In order to drill this deepwater extended reach well while acquiring formation pressures in the harsh environment, Sperry Drilling recommended a solution that combined the Geo-Pilot® rotary steerable system with quad combo formation evaluation sensors and GeoTap® formation pressure testing services.
Summary Summary Norway: Matched Drilling System Delivers Record Run and Helps North Sea Operator Saves over Twenty Days on Reservoir Section Sign in required
An operator wanted to drill the entire 8 ½-inch x 9 ½-inch reservoir section of a North Sea well in one trip, using one bottom-hole-assembly (BHA) from just below the 10 ¾-inch shoe at 3,638 meters (11,936 feet) to the target depth of 7,065 meters (23,179 feet).
Summary Summary Saudi Arabia: Matched System Delivers Increased ROP and Zero NPT for Field Record in Saudi Arabia Sign in required
Challenge: Excel on performance to safely and economically drill a vertical lump sum turnkey well in the Shedgum Field.
Summary Summary Oman: GeoForce® Motor Saves Operator 7.5 Drilling Days with Fewest Number of Bit Runs in History of Field Sign in required
An operator in Oman had been using two different bottomhole assemblies (BHAs) to drill a 12-1/4-inch vertical section for unconventional wells.
Summary Summary USN-Canada: Operator improves reservoir exposure to 100% with innovative Sperry Drilling geosteering solution despite hole-size challenge Sign in required
With a drilling program of multiple unconventional wells, an operator in Alberta, Canada has been searching for a solution to improve the economic viability of its assets to a lower cost per BOE.
Summary Summary Canada Alberta: Operator Reports Total Estimated Savings of More Than US$7.6 Million Sign in required
An operator working in the McMurray formation of northern Alberta, Canada, sought to increase operational efficiency and decrease total days per well. The operator had previously taken seven to eight days to drill a well at an approximate cost of US$997,000 (C$1.3 million) per well.
Summary Summary U.K. Offshore: Operator Saves Significant Rig Time by Gathering Complete Formation Evaluation Data in Real Time Sign in required
In an offshore U.K. well, an operator needed to obtain a complete formation evaluation (FE) data set to measure reservoir and overburden characteristics in a deviated well.
Summary Summary North Sea, Norway: Operator Successfully Runs 5 ¾-inch Slim-Hole Drilling Operation with Geo-Pilot® RSS System Sign in required
In a mature field on the Norwegian Continental Shelf of the North Sea, an operator had attempted twice to drill a new extended-reach drilling (ERD) wellbore with a 2.05 measured depth (MD) to true vertical depth (TVD) ratio that resulted in the bottomhole assembly (BHA) becoming lost in hole above the reservoir.
Summary Summary Gulf of Mexico: Geo-Pilot® GXT 9600 Rotary Steerable System + Quad-Combo Solution Delivers Section Benchmark Performance in Ultra-Deepwater Exploration Well, Saving Operator Approximately $2,200,000 Sign in required
This exploratory well in ultra-deepwater near the marine border between the U.S. and Mexican Gulf of Mexico, presented challenging water depths of over 8,000 feet (2,500 meters), a seabed temperature of approximately 35 degrees Fahrenheit (3.5 degrees Celsius), and restrained logistics due to severe weather. The “J” profile well was planned to evaluate hydrocarbon potential in a reservoir located under a multi-fault block near a salt dome. Downhole stress could impact build capability during drilling and make it difficult to achieve the planned well trajectory, which had a maximum inclination of 28.5 degrees and azimuth of 165 degrees.
Summary Summary North Sea: Statoil Saves 9.25 Hours of Offshore Rig Time Using SlickBore® Matched Drilling Service Sign in required
While drilling the 17½-in. section of an offshore well in the Valemon gas and condensate field, Statoil encountered a weak, unconsolidated sand formation interbedded with shale.
Summary Summary USA, Southern: Operator Reduces Wellbore Position Uncertainty and Avoids Potential Costly Sidetracks for a Blowout Relief Well Sign in required
While conducting operations on an unconventional relief well for a blowout in a field in the southern part of the USA, an operator observed a discrepancy in the well position after analyzing the data from two separate surveys in the same wellbore.
Summary Summary MaxBHA™ Design Software
MaxBHA™ software transforms the art of BHA design into science, providing a state-of-the-art solution for improving well placement, drilling performance and tool reliability through real-time modeling of critical rotary speed and sag correction.
Related Information

Related Information Дополнительная информация