Boost Productivity through Optimal Well Placement


How can I optimize my wellbore path to exploit the most productive reservoir zones?


Precise well placement in West African salt basins is critical to maximize reservoir drainage and optimize asset value while reducing nonproductive time (NPT).

Early production from a reservoir, as well as ultimate oil and gas recovery often depend on timeliness and  accurate geosteering decisions. Best results are achieved by thoroughly understanding the reservoir in real time to identify natural fractures, dissolution structures, vugs and other characteristics of salt structures.

Halliburton has technologies that can improve reservoir understanding and enable the detection of formation characteristics, enabling improved wellbore positioning, using technologies like 4D seismic to identify initial placement and well targets and to confirm drainage. These solutions help operators use information gained while drilling to generate multiple scenarios and update models to optimize geological engineering and meet economic objectives.

Experience matters, and Halliburton has directionally drilled over 250,000 ft. in deepwater West Africa. Halliburton’s comprehensive service utilizes an iterative process combined with innovative technologies, applications and experienced personnel to improve reservoir deliverability through optimal wellbore positioning.

In one case offshore Nigeria, an operator needed to build a triplex well. This unusual wellplan with three wellbores of different sizes was drilled from one slot and successfully deployed, using our rotary-steerable systems and bits to stay within a 5-ft. (1.5 m) window in the extended horizontal sections. All three horizontals are now producing successfully.

Improving the speed and quality of decisions can help lower NPT, leading to cost savings and improved returns on investment.  Our solutions help to better place the wellbore in the most productive interval through improved understanding of the reservoir.

SeaWave Offshore Water Treatment Service
Halliburton's SeaWave service offers a versatile solution for effective and consistent processing of water for discharge for offshore completions and production. The SeaWave unit relies on electrocoagulation to destabilize particulate and break oil/water emulsions, typically achieving 99% reduction in contaminants.
DeepSure™ Certified Products
Multi-Chem understands that a properly engineered and implemented chemical treatment program can contribute to significant savings in deepwater/CAPEX projects. That’s why we dedicate the time and technology to assure that every treatment will continue to flow through every umbilical, every time – no matter how long the deepwater line runs.
Xaminer® Array Sonic Tool
Our Xaminer® Array Sonic Tool (XAST) service offers simultaneous monopole and crossed-dipole sonic information. P-wave and S-wave slowness can be obtained in a range of formation conditions, borehole sizes, and even extreme borehole hydrostatic pressures. This ultra-reliable far-spaced monopole and crossed-dipole tool can also estimate minimum and maximum principal stresses and stress-field orientation.
Hostile WaveSonic® Tool
Our small-diameter Hostile WaveSonic® Tool is the only high-temperature (HT) cross-dipole sonic tool in the industry capable of operating in your most extreme environments. Combinable with the HEAT™ Suite tools, if high temperature is your challenge, this service is the clear choice for your next HT evaluation.
MRIL®-XL Magnetic Resonance Imaging Logging Service
Our Magnetic Resonance Imaging Logging-XL (MRIL®-XL) service builds upon the highly successful MRIL technology to deliver the same high-quality nuclear magnetic resonance (NMR) measurements in a larger borehole range. The most complex and demanding wells now include boreholes of 12¼ to 15 in. Our MRIL-XL service will log wells up to 16 in. in diameter. Even more impressive, the tool’s slim profile also enables logging in wellbores as small as 7⅞ in.
MRIL® Magnetic Resonance Imaging Logging
Wireline logging service accurately and directly measures key factors that influence the ability of a well to produce commercial quantities of oil or gas.
MRIL®-Prime Magnetic Resonance Imaging Logging Service
With an extremely high signal-to-noise ratio, our Magnetic Resonance Imaging Logging-Prime (MRIL®-Prime) service is engineered to look 360 degrees around the borehole. Combining our nine measurement volumes with our advanced acquisition and signal processing methods, all nine measurements can operate continuously and independently. What that means for you—faster logging, no idle time, and all applications accomplished in a single pass.
MRIL-2D Fluid Characterization
Robust gas identification and quantification from two NMR dimensions (T1 and T2) is now offered with both the MRIL-XL and MRIL-Prime services
High-Frequency Dielectric Tool (HFDT™) Tool
The HFDT-I (High Frequency Dielectric tool) is a pad type tool intended to provide the porosity filled with water in the near borehole region of the formation as well as its salinity.
Xaminer® Sonic Imager
Our Xaminer® Sonic Imager (XSI) service provides high-fidelity data via its quiet tool design, hybrid onboard memory and real-time wireline telemetry data paths, and advanced processing capabilities. The state-of-the-art design enables characterization of seismic properties, geomechanics, and completion needs in a wide range of reservoirs.
LOGIQ® Openhole Logging Platform
Halliburtons breakthrough design for openhole logging platform and cased-hole logging. PC-based surface system brings new capabilities and ergonomics to wellsite workstations.
ACRt™ Array Compensated Resistivity Tool Family
The ACRt™ array compensated resistivity tool system represents the latest thinking in conventional array induction technology
Oil Mud Reservoir Imager (OMRI™) Tool
Our Oil Mud Reservoir Imager (OMRI™) tool is a microresistivity imaging tool specially developed to work on wells drilled with oil-based mud. The tool generates crisp images of the borehole resistivity with an azimuthal resolution of 0.4 in. and a vertical resolution of 1 in. The tool has six articulated (in two axis) caliper arms. Each pad contains six resistivity sensors, providing a total of 36 microresistivity measurements circumferentially around the borehole.
Focused Oval Pad
Wireline tool provides representative samples of a well's formation fluid, and can monitor up to eight fluid and formation properties. Also provides pressure gradient testing.
Reservoir Description Tool (RDT™) Tool
Wireline formation pressure testing and sampling runs should be quick, completed in a single descent, provide pure single phase fluid samples, and deliver the required pressure tests along with the associated mobilities and pressure gradients. The Halliburton Reservoir Description Tool (RDT™) employs several best in class features to help you meet these goals.
Rotary Sidewall Coring (RSCT™) Tool
Acquires up to 60 core samples in a single run, providing undistorted samples for a range of petrophysical testing and analysis, free of micro-fractures typical in percussion cores.
Xaminer® Hostile Formation Tester (XHT)
The search for hydrocarbons in HP/HT conditions should not exclude the collection of PVT samples and formation pressures. Over the last decade, Halliburton has led the way in obtaining formation pressure and samples in hostile environments. Using the same proven reliability and durability, our Xaminer® Hostile Formation Tester (XHT™) service delivers these critical evaluation components at 450°F (232°C) and 35,000 psi. Using new technology pump designs, it builds upon the proven platform of the HSFT-II™ tool.
ICE Core® Fluid Analysis Service
The RDT Integrated Characterization Section (ICS) expands measurements of fluid composition downhole by using ICE Core® fluid analysis technology. Based on a multivariate optical computing technique, this enables high-resolution hydrocarbons composition to be measured.
Hostile Sequential Formation Tester (HSFT-II™) Tool
Our Hostile Sequential Formation Tester (HSFT-IITM) tool delivers sizzling performance in extreme temperatures. This tester acquires formation pressure data and fluid samples under extreme conditions—up to 450°F (232°C), 30,000 psi, and in boreholes as small as 4 in. in diameter.
Xaminer® Coring Tool
Our Xaminer® Coring Tool sets the bar for large-diameter cores in deep water. Our versatile, reliable coring tool is a new approach for acquiring multiple sidewall core samples. The service is engineered to provide a combination of high-speed bit rotation, torque, and bit advancement for optimal drilling performance.
3D Salt Proximity
Using 3-component downhole geophones, Halliburton refraction salt proximity methods can help operators drill around salt formations
Zero-Offset Vertical Seismic Profiles
Even in deviated wellbores and complex structures, the higher frequency of our Zero-Offset VSP produces greater vertical resolution than surface seismic for a much higher-resolution“subsurface image” of the near well corridor stack.
Offset Vertical Seismic Profile VSP
Offset, Walkaway and 3D VSPs image the formation in one or more directions laterally away and beneath the wellbore.
Deepwater Reservoir Solution Center (DW-RSC)
Offers world-class solutions and services in a wide variety of deepwater reservoirs, from conventionals to turbidites and presalt carbonates.
TightGasXpert℠ Interpretation Service
Advanced Tight Gas Reservoir Analysis. Since unconventional tight gas sands demonstrate much higher matrix permeability than organic source rocks, a tailored asset solution also exists to both optimize and predict fracture flow performance from these reservoirs.
MaxFire™ Electronic Firing System
Halliburton now offers the MaxFire™ electronic firing system, an ultrahigh-pressure 40,000-psi (276-MPa), fully programmableelectronic firing system. This unmatched technology is alsocapable of low pressure-cycle operation, and allows for immediateor delayed detonation.
MaxForce® Perforating Shaped Charges
The next-generation shaped charge, MaxForce perforating shaped charges delivers maximum propulsion and greater depth of penetration to improve perforation in hard to penetrate conditions.
LockJar® Multi-Conductor E-Line Hydraulic Jar
Simple, effective device for freeing a stuck tool string during openhole logging
The CAST-ITM is the ultimate well integrity diagnostics solution, providing all the benefits of Halliburton’s industry-known cement evaluation and casing inspection services with increased tool combinability, resulting in the most efficient logging and surface system platform use in the market.
Advanced Cement Evaluation Service
Advanced Cement Evaluation Service provides quick, accurate information on cement bond, even when using foamed cements.
Monoconductor Conveyed Simultaneous Ultrasonic / Sonic / Caliper Casing and Cement Evaluation
Electromagnetic Pipe Xaminer® V (EPX™ V) Service
Using accurate High-Definition Frequency (HDF) technology, the EPX V tool reduces diagnostic time and provides comprehensive information for monitoring programs.
Acoustic Conformance Xaminer® Service
Acoustic Conformance Xaminer® Service uses hydrophone array technology to locate and describe communication paths and flow areas—vertically and radially in the wellbore area in real time.
RELAY™ Digital Slickline System
In an industry where time is money, the ability to optimize well interventions and make decisions quickly is invaluable. Introducing the RELAY™ system
Smart Release Tool
The Halliburton Smart Release tool (SRT) was designed for use in deepwater wells, as a contingency for releasing from the tool string if the bottomhole assembly becomes stuck
Memory Production Logging (MPL℠ ) Service
Memory Production Logging Service employs downhole memory to record accurate flow profiles and diagnostics, then plays back its captured data when tools are retrieved.
DPU® Downhole Power Unit
Downhole Power Unit is an electro-mechanical device designed to produce a linear force for setting or pulling wellbore tools such as monolocks, bridge plugs, or packers.
DPU®-Actuated Tubing Perforator
The Halliburton Downhole Power Unit (DPU®) -actuated Tubing Perforator offers a nonexplosive, cost-effective solution to create a single perforation hole in tubing or casing.
DeepSuite™ Wireline Tool Technology
Unmatched Deepwater Wireline and Perforating Capabilities. Halliburton has absolutely everything needed to help safely and successfully perform jobs in any deepwater environment. Our innovative solutions feature new capabilities that redefine what is possible in ultra-deepwater plays and enable new levels of risk mitigation for operators.
ADR™ Azimuthal Deep Resistivity Sensor
Provides deep reading resistivity up to 18 feet (5.5 meters) into the formation – over 2,000 unique measurements for both precise wellbore placement and more accurate petrophysical analysis
VertiSteer™ Vertical Drilling Tool
The VertiSteer™ tool is a mechanical drilling technology with vertical correction capability used to achieve and maintain a vertical wellbore path without intervention.
Turbopower™ Turbodrills
Turbopower™ turbodrills help to reduce well time and lower costs-per-foot in hard and abrasive formations, and high-temperature environments.
Geo-Pilot® Duro™ Rotary Steerable System
The Geo-Pilot Duro is a rotary steerable system (RSS) engineered for improved durability and performance in harsh environments, where optimal drilling efficiency, trip time, and mud-loss control are essential.
Geo-Pilot® Dirigo Rotary Steerable System
The Geo-Pilot® Dirigo system is the only rotary steerable system that can achieve consistent higher build rates in large hole sizes. Now you can reap the benefits of rotary steerable drilling with build rates previously only achievable with conventional mud motors.
Quasar Pulse® Extreme-Temperature M/LWD Service
Integrated LWD service for high-temperature operation, up to 200°C (392°F), providing gamma ray, directional survey, borehole pressure and drill-string vibration measurements.
MRIL®-WD™ Magnetic Resonance Imaging Logging-While-Drilling Sensor
MRIL®-WD™ source-less porosity sensors use the Halliburton-patented lateral-motion-tolerant T1 acquisition method to measure producible fluid volume across a wide range of formation types while drilling, helping you enhance reservoir understanding, place wells accurately, and reduce well time.
XBAT™ Azimuthal Sonic and Ultrasonic LWD Service
LWD sonic tool with multipole transmitters and four azimuthal receiver arrays along with a 4-pinger acoustic caliper.
XR™ Reamer
The XR™ reamer tool is Halliburton’s premium hole enlargement tool, engineered for reliability and to minimize vibrations
TurboForce™ Fixed Cutter Drill Bits
TurboForce™ impregnated drill bits feature such innovations as continuous shoulder design, mass balancing, greater diamond content and active gauge geometry that enable these bits to drill greater footage, faster, in challenging turbine drilling applications.
TDReam™ Tool
Reducing Rathole Length While Increasing Risk Mitigation
Pulsonix® TFA Service
The Halliburton Pulsonix® Tuned Frequency Amplitude (TFA) service is an innovative process to help optimize near-wellbore treatment effectiveness.
SPECTRUM Real-Time Coiled Tubing Services
SPECTRUM Real-Time Coiled Tubing Services combines intervention and diagnostic services to help operators monitor and optimize job performance in real time, resulting in greater efficiency, increased reliability, and higher return on investment.
Subsea Pigging and Hydrostatic Testing Unit (SPHU)
The latest generation SPHU has the ability to change mode while subsea, from pigging to hydrostatic testing mode
SmartPlex® Downhole Control System
The SmartPlex® downhole control system is an electro-hydraulic multi-drop system that provides simple and reliable zonal control of multiple valves (12) in a single wellbore with a minimum number of the control lines.
Accu-Pulse™ Incremental Positioning Module
The Accu-Pulse incremental positioning module provides incremental opening of a multiple-position interval control valve (ICV) allowing operators to control produced or injected fluid rates, greatly enhancing reservoir management capabilities.
HF-1 Packer
HF-1 premium packer is a single-string, retrievable, cased-hole packer that features a facility for bypass of multiple electrical and/or hydraulic control lines. Available for use as both the top production packer and as one of many lower packers isolating adjacent zones, the HF-1 packer can operate under higher loads and greater pressures than standard production packers.
DataSphere® ROC™ Permanent Downhole Gauges
Halliburton's DataSphere® ROC™ permanent downhole gauges (PDGs) help increase productivity through the life of the well or reservoir by providing reliable, real-time permanent data about downhole conditions.
DataSphere® LinX® Monitoring Systems
The LinX® monitoring system provides real-time, well integrity monitoring in subsea wells without the need to halt production.
DataSphere® Array System
The DataSphere® Array system is a reliable, permanent, multi-point reservoir monitoring system that provides distributed pressure and temperature sensing in single-zone and multi-zone land and subsea applications.
DataSphere® FloStream™ Venturi Flow Meter
The FloStream flowmeter is designed specifically to meet the requirements of the well in relation to material selection and expected flow rates. FloSteam flowmeter system operation is based on the Venturi principle
HS Interval Control Valve (HS-ICV)
HS-ICV is designed for deepwater environments, and can withstand pressures up to 15,000 psi and temperatures up to 325ºF (163ºC)
CheckStream® Chemical Injection System
The Halliburton CheckStream® system is a downhole chemical injection system featuring a dual redundant check valve installed and protected by an industry-standard mandrel chassis.
DynaLink™ Telemetry System
Halliburton's latest innovation in surface readout telemetry utilizing wireline or completely wireless. The DynaLink™ telemetry system provides operators with pertinent and timely data from downhole sensors by operating as a real time wireless sensor and actuator network using acoustic energy in the tubing string.
Armada® Sampling System
The Armada® sampling system is Halliburton’s next-generation fluid sampling solution designed for cased-hole environments ranging from normal to heavy/viscous to hostile.
RezConnect® Well Testing System
The RezConnect® Well Testing System is the industry’s FIRST fully acoustically actuated Drill Stem Test (DST) system powered by Halliburton’s proven DynaLink® Telemetry System..
Environmentally Distinctive Burner
The Environmentally Distinctive Burner is specifically designed for use in ecologically sensitive areas, where it's critical to quantify produced emissions.
Dash® Large Bore Subsea Safety System
The Dash® Large Bore Subsea Safety System is an all-new EH system designed to ease assembly, simplify maintenance processes, communicate real-time landing string conditions, simplify re-latch operations, and provide faster activation response times.
Veto™ Subsea Safety Systems
Halliburton Veto™ is a suite of direct hydraulic subsea safety systems that allow customers to safely conduct well tests, deploy completions, and perform workovers in particularly harsh, deepwater environments.
Dash® 3” Subsea Safety System
The Dash® 3” Subsea Safety System has a unique design which moves away from complicated fixed piping toward a simple bolt on design greatly reducing maintenance time and resulting in one of the shortest systems on the market.
GeoBalance® Service
GeoBalance® Managed Pressure Drilling service can dramatically decrease non-productive time (NPT) and reduce drilling days to improve economics in applications where wellbore mechanics prevent use of conventional techniques.
XtremeGrip™ Expandable Liner Hanger System
The Halliburton XtremeGrip™ expandable liner hanger system takes the standard VersaFlex liner hanger to the next level. This high-performance, advanced metal sealing technology provides a fully compliant metal seal with a fully bonded resilient elastomeric seal to account for imperfections in the parent casing.
Evo-Trieve® Bridge Plug
The Evo-Trieve retrievable bridge plug is a high performance retrievable monobore plugging device that is ISO 14310 V0 qualified to 7,500 psi and upto 325°F.
FS Fluid Loss Isolation Barrier Valve
The FS fluid loss isolation barrier valve provides a reliable, interventionless solution for fluid loss control in your completion eliminating potential formation damage.
DepthStar® Tubing-Retrievable Safety Valve
The DepthStar® Tubing Retrievable Safety Valve (TRSV) is a revolutionary new concept in the realm of surface controlled subsurface safety valves.
Swellpacker® Zonal Isolation System
The Swellpacker® swellable elastomer zonal isolation system is a packer based on the swelling properties of rubber in hydrocarbon.
Inflow Tech® Test Packer
The CleanWell® Inflow Tech® test packer is designed to perform isolated negative or positive inflow tests on downhole liner tops. The tool has top and bottom connections and can be run in conjunction with other wellbore cleaning tools, thereby promoting “single-trip” displacement runs.
CleanWell® Solutions
A Comprehensive Wellbore Cleanup and Displacement Service
PetroGuard® Openhole Shunt System
PetroGuard® Openhole Shunt system for sand screens is a design improvement on field-proven equipment to enhance gravel-packing operations in production intervals.
EquiFlow® Autonomous Inflow Control Device
Restricting water and gas production at breakthrough, this autonomous inflow control device (AICD) helps increase recoverable reserves, extend well production, and reduce the expense and risk of unwanted fluid production.
Endurance Hydraulic Screen®
Endurance Hydraulic Screen® is a compliant screen that delivers a new level of sand control completion, providing reservoir compliance through positive wellbore support.
ESTMZ™ Enhanced Single-Trip Multizone Completion System
ESTMZ™ Enhanced Single-Trip Multizone system enables isolation and treatment of several intervals during a single trip of the workstring.
Red Zone® FracPac™ Systems
Halliburton’s Red Zone® FracPac™ systems incorporate the Multi-Position Service Tool (MPT) with Versa-Trieve®VBA packers to provide for ultra high-rate, large proppant volume, sand control pumping treatments.
Intercept® Retrievable Bridge Plug
The Intercept retrievable bridge plug (RBP) is a gas-tight, well-suspension plug ideal for dual-barrier applications.
EquiSeal™ Conformance Service
Custom water and gas shutoff system for horizontal or highly deviated wellbores.
BackStop™ Water Conformance Control Service
BackStop™ Water Conformance Control Service controls unwelcome water production by introducing an exceptionally capable water control agent at the shallow part of the formation around perforation tunnels.
WaterWeb® Water Control
WaterWeb® Water Control Uses unique polymer chemistry to help create oil-water separation in the reservoir, impeding water flow and enhancing hydrocarbon flow to the wellbore.
Stim Star IV
Gulf of Mexico
LO-Gard℠ Service
New technology for fluid loss control helps improve gravel packcompletion results.
HCS Advantage™ Cementing System Skid
Twin HT-400™ pump cementing skid designed for hazardous area installation.
HCS AdvantageOne™ Cementing Skid
The HCS AdvantageOne™ skid system is the next generation of cementing and well-control pump performance for ultra-deep water.
LockCem™ and LockSeal™ Cement Systems
LockCem™ cement represents a Portland cement and resin blend; LockSeal™ cement is the foam version of the slurry system.
WellLock® Resin
WellLock® resin can act as an annular barricade against water and gas leaks.
ZoneSeal® Isolation Process
A fully engineered zonal isolation process with automated controls to deliver the benefits of light-weight (foam) cement during placement and for the life of the well.
iCem® Service d
Runs various simulations according to specific wellbore architecture design data provided by the operator. Based on computational fluid dynamics and finite element analysis, the simulations help enable the evaluation and optimization of cement designs to specifically address the operational and long-term parameters of individual wells.
Isolizer™ Centralizer
The Isolizer™ centralizer is an optimized solution for tight-tolerance applications.
SSR-II™ Subsurface Release II Cementing Plug System
Used to remotely release cementing plugs at a selected subsurface depth.
Commander™ 1000 Top-Drive Cementing Head
Commander™ 1000 top-drive cementing head is designed for offshore operations to surface launch balls or darts in order to operate subsea plug sets and associated tools.
BaraKlean® Well Cleaners
High-performance well cleaners
N-FLOW™ Filter Cake Breaker Systems
Baroid’s N-FLOW™ system provides optimal filter cake and formation damage removal.
The HYDRO-GUARD® system is a water-based drilling fluid designed to provide maximum shale stabilization in highly reactive clays.
BaraECD® High-Performance Non-Aqueous Fluid System
Halliburton’s BaraECD® High-Performance Non-Aqueous Fluid System has a rheological profile designed to provide low, controlled Equivalent Circulating Density in wells with extreme narrow pore pressure/fracture gradients, reducing the risk of drilling induced fractures.
BaraLogix® Real-Time Solutions
Automated monitoring, real-time density & rheology units, and fluids optimization services.
On-the-Fly (OTF) Mixer
The On-The-Fly (OTF) Mixer is a thorough, high-performance fluid blending, portable piece of equipment for your riserless drilling applications.
BaraStream™ Honey Comb Base (HCB™) Tanks
Designed for the reliable discharge of bulk materials from pneumatic silos
GEM™ Elemental Analysis Tool
Offering quick and precise evaluations of complex mineralogies, our GEM™ elemental analysis tool uses proven interpretation processes and integrated petrophysical analysis. A neutron-induced capture gamma-ray spectroscopy logging system, the GEM tool derives elemental contributions contained within the total measured gamma-ray energy spectrum.

Halliburton's Key Products and Services

Filter By  
Количество записей на странице Show     results per page