Chemical Solutions

Deciding on an oil and gas chemical supplier can often times be difficult. At Multi-Chem, we make that decision easier for you. Safety, product design and superior local service are the only ways we know how to do business. What makes Multi-Chem truly different is our people, our chemical application and our commitment to always do the right thing.

Multi-Chem has the world’s foremost chemical experts, in the lab and in the field. We are problem solvers and solution finders. Our innovative solutions are designed to meet the complex chemical challenges associated with completion, production and pipeline transportation of oil and gas. These solutions are supported by local technical service through a network of warehouse/service centers, blending facilities, and a fleet of mobile labs.

Chemical EOR Floods

CEOR flooding enhances production rates while compounding produced fluid treatments and demanding high spec source water for the flooding processes. Learn how Multi-Chem can treat CEOR issues while providing project management to increase CEOR success.

CO2 Floods

CO2 floods can create unique and enhanced problems in your production system. See how and where they may occur and how Multi-Chem can provide solutions to these and other CO2 flood production and injection issues.

Offshore Production

In offshore production, learn where complications can arise in your production system and how Multi-Chem can address your issues – substantially increasing the producing life of the well.

Onshore Production

See where problems can arise in your production system and how Multi-Chem can bring you an innovative suite of customized solutions that can help reduce your operating costs.

Filter By  
Количество записей на странице Show     results per page
  TitleНазвание  DateДата
Summary Summary BDF™-443 Filter Cake Breaker - Product Data Sheet
BDF™-443 Filter Cake Breaker Product Data Sheet
Summary Summary BDF™-442 Filter Cake Breaker - Product Data Sheet
BDF™-442 Filter Cake Breaker Product Data Sheet
Summary Summary Operator in the Gulf of Mexico Successfully Inhibits High Molecular Weight Paraffin
An operator in the deep water Gulf of Mexico developed a subsea gas well through a six mile pipe-in-pipe insulated flowline, and upon first production, it became clearly evident the condensate had much higher paraffin content than anticipated.
Summary Summary Operator Prevents Paraffin Deposition in 20-mile Deep Water Subsea Tieback in GOM
The operator was concerned about paraffin buildup in one of its producing gas/condensate wells located in the Gulf of Mexico. The well was located at a water depth of approximately 2,100 ft. with a tieback to the offshore platform via a 20-mile insulated flowline.
Summary Summary Paraffin Deposits Video
When the challenge is paraffin, the solution is Multi-Chem. Paraffin wax can be a pipeline nightmare because paraffin deposits are a leading cause of decreased production.
Summary Summary NaturaLine® Products and Solutions
Multi-Chem’s customer-specific NaturaLine® solutions can offer the operator the opportunity to use a reduced amount of chemicals and achieve the same, or greater, production results. For the community where the operations take place, this means improved environmental and safety stewardship.
Summary Summary Remediation of Asphaltenesin Deep Water Wells Results in 2,000 BOPD Production Increase
Multi-Chem was approached by the customer to develop a remediation plan (xylene soak) that would reduce the tubing differential pressure and return production to normal levels. The remedial xylene soak resulted in a 1,550 psi decrease in the tubing differential pressure was decreased by 1,550 psi.
Summary Summary Foam Assisted Lift (FAL)
Multi-Chem’s Foam Assisted Lift (FAL) solutions help maintain the critical velocity needed to carry liquids to the surface in producing wells where production pressures are not high enough to remove produced fluids from the well.
Summary Summary Operator Increases Gas Production Rate by 15% with Foamer
An operator of a mature gas field was previously applying foamer to 200 pressure-depleted sweet gas wells spread across a wide geographic area to unload liquids and maximize gas production. The incumbent chemical was an inefficient, low performing well foamer, which caused the operator to incur high injection rates, high treatment costs and high frequency well top-up.
Summary Summary AcroClear® Sulfide Controller
Multi-Chem's AcroClear® acrolein-based H2S scavenger and iron sulfide dissolver consistently outperforms conventional chemical solutions, providing highly effective removal of iron sulfide in production and injection wells, and repairing near-wellbore damage caused by iron sulfide deposits and previous acid-jobs.
Summary Summary AcroCide Biocide
AcroCide biocide is highly effective in controlling micro-organisms in water used in frac jobs and production systems.
Summary Summary SeaWave Offshore Water Treatment Service
Halliburton’s SeaWave service offers a versatile solution for effective and consistent processing of water for discharge for offshore completions and production.
Summary Summary Operator Returns Plugged SWD Well to Full Production with Customized Chemical Treatment
An operator was experiencing plugging issues that kept re-occurring in its saltwater disposal (SWD) well in the mature Roseland Plantation field, along the Gulf Coast of Louisiana.
Summary Summary Deep Water Application
In offshore production, learn where complications can arise in your production system and how Multi-Chem can address your issues – substantially increasing the producing life of the well.
Summary Summary Mature Fields Application
See where problems can arise in your production system and how Multi-Chem can bring you an innovative suite of customized solutions that can help reduce your operating costs.
Summary Summary Scale Control Solutions
Multi-Chem's customized scale control solutions help protect production equipment from damaging mineral deposits, maintaining asset integrity and enhancing production over the entire life cycle of the well.
Summary Summary Squeeze Treatment Recovers Production from an Under-Producing Well
An customer experienced considerable scale formation of CaSO4 and CaCO3 downhole in one of its assets. The challenge to control the high scaling potential produced brine contributed to a loss of 10,000 BOPD across the field and resulted in the shut-in of 10 of the 70 wells.
Summary Summary Starting Multi-Chem Scale Control Program at Completion Reduces Workover Costs
A producer in the Rocky Mountains requested a cost-effective scale inhibitor be added to the completion fluid to prevent downhole scale formation in the early stages of the well’s life.
Summary Summary Unique Matrix Treatment Boost Production 26 Percent in Mature Asset in Latin America Region
In mature oilfields, production can decline as fields are affected by the presence of water, resulting in increased production costs. This was the case of Mexico’s Cantarell field, an aging offshore field in the Bay of Campeche.
Summary Summary Bakken Operator Reduces Water Injection by 76%
Multi-Chem worked with a Bakken operator to address a severe salt deposition issue. After relying on high volume fresh water continuous treatments to maintain normal production, a patented halite control product, MX 2-3875, was introduced to control salt precipitation and reduce the required fresh water volumes.
Summary Summary Water Technology: Understanding, Interpreting and Utilizing Water Analysis Data
The significance and importance of water to the oil and gas industry cannot be overstated. While water is often an unwanted by-product of production, water is utilized in many production scenarios and is often times the primary driver for the production of oil. This paper discusses the importance of an accurate water analysis and will discuss the practical uses of this information.
Summary Summary Consecutive Treatments Enhance Biocide Efficacy During Water Flooding of Algerian Oilfield
An Algerian operator found it necessary to employ water flooding for optimal production at two of its mature oil and gas fields. The bulk injection water was comprised of a combination of saline produced water diluted with aquifer water.
Summary Summary Combination Multi-Chem Biocide System Used to Cost-Effectively Save 650,000 Gallons of Water for Re-Use
An operator located in Wheeler, Texas encountered a sudden, emergency bridge plug leak, forcing them to postpone an imminent fracturing treatment for one month during repairs. This unforeseen delay meant that the ready-to-go frac water would be left standing for approximately 30 days in 31 frac tanks on location.
Summary Summary Continuous Injection of DeepSure Certified LDHI Outperforms Previous Hydrate Treatment
Hydrate particle formation and deposition is a common problem in Gulf of Mexico deep water oil and gas production systems. Caused by a combination of gas, water, relatively low temperatures and high pressures, hydrate particles tend to agglomerate and deposit on pipe walls. This buildup can occur rapidly and lead to blockages, resulting in lost production and high remediation costs. Therefore, prevention is of utmost importance.
Summary Summary LDHI Video
When the challenge is hydrates, the solution is Multi-Chem's low dosage hydrate inhibitors (LDHI). Falling temperatures can cause ice-like structures containing natural gas to form from water in the flowline. Risks can increase exponentially.
Summary Summary Sulfide Stress Cracking - Practical Application to the Oil and Gas Industry
The phenomenon of sulfide stress cracking (SSC) can result in catastrophic failures of pressurized equipment and piping, resulting in extensive damage, injuries and possible fatalities. This paper concentrates on, and identifies, the requirements for SSC to occur and gives designers and operators practical options for the prevention of SSC in equipment operating in an aqueous H2S environment.
Summary Summary Wax-Inhibitors
Multi-Chem offers paraffin treatments, such as crystal modifier type inhibitors, dispersants and solvents, to help control deposition thus keeping your production running smoothly.
Summary Summary Wax-Inhibitors
Multi-Chem offers paraffin treatments, such as crystal modifier type inhibitors, dispersants and solvents, to help control deposition thus keeping your production running smoothly.
Summary Summary Oxygen-Scavengers
Most oxygen corrosion in oilfield metallurgy is caused by the addition of fluids from the surface that have been exposed to air for any length of time. When large quantities of fluids are injected downhole—as they are in fracturing operations, saltwater disposal wells, formation squeezes, or waterflood operations—oxygen can be introduced in significant quantities.
Summary Summary NaturaLine® Products and Solutions
Multi-Chem’s NaturaLine® solutions, including our line of carefully selected environmentally conscious products, offer a unique opportunity to collaborate with customers and develop the most effective and environmentally responsible options to production challenges.
Summary Summary Foamers
Multi-Chem provides customized foamer solutions and applications that can be used in a wide variety of operating conditions, such as deepwater production, winterized environments for colder climates and high-temperature products that are stable for deep, hot gas wells.
Summary Summary AcroClear® Sulfide Controller
AcroClear® sulfide controller consistently outperforms conventional chemical solutions, providing highly effective removal of iron sulfide in production and injection wells, and repairing near-wellbore damage caused by iron sulfide deposits and previous acid-jobs.
Summary Summary Iron-Sulfide-Dissolvers
Multi-Chem provides a number of specialty chemicals to remove iron sulfide, all specifically designed to attack your unique production challenges in the most effective way possible. Our approach is tailored to your own system conditions and operating parameters for the best in corrosion protection.
Summary Summary Scale Control
Scale inhibitors assist with oil and gas production by maintaining asset integrity. Multi-Chem's specialty scale inhibitors work to control a wide variety of scale production challenges to help prolong the life of your well.
Summary Summary Biocides
The Multi-Chem line of biocides and biological control technologies are formulated to control deleterious micro-organisms in water used in frac jobs and production systems, and help maintain asset integrity and mitigate potential problems, such as microbiologically induced corrosion (MIC), biomass accumulation, biogenic sulfide production, oil carryover, and polymer degradation.
Summary Summary Emulsion-Breakers
Multi-Chem offers emulsion breakers for both water-in-oil (regular) and oil-in-water (reverse) emulsions, helping you improve oil-water separations while increasing your oil and gas production rates.
Summary Summary Hydrate-Inhibitors
Multi-Chem�s effective Low Dosage Hydrate Inhibitor (LDHI) programs are designed to control hydrates and reduce the risk of problems caused by hydrates in gas production systems, such as line blockages and plugs.
Summary Summary H2S-Scavengers
Multi-Chem offers a complete line of water-soluble and oil-soluble hydrogen sulfide scavengers that can be applied via continuous injection or through batch treatments.
Related Information

Related Information Дополнительная информация