Fixed Cutter Drill Bits

As a leading drill bit solution provider, Halliburton continues to advance the evolution of fixed cutter bit technology, introducing innovations that have produced a "step-change" in application-specific PDC bit design.

Incorporating the most advanced PDC cutter technology available, Halliburton’s Fixed Cutter bits are designed with the “accumulated knowledge” of a proven design platform that incorporates state-of-the-art force management and drilling dynamics optimization technology.

This highly engineered design platform combines sophisticated modeling and analytical capabilities with a "tool box of options" for unmatched design capabilities, producing bits engineered to meet specific challenges:

  • Steerable applications
  • Hard rock formations
  • Deep unconventional wells
  • Turbine drilling

Because each application presents unique challenges to performance, the process of Design at the Customer Interface (DatCISM) process positions experienced design personnel side-by-side with the customer, and equips them with the most sophisticated drilling analysis software available, enabling application-specific design solutions to optimize detailed aspects of drill bit design.

MegaForce™ Fixed Cutter Drill Bits
MegaForce™ matrix body designs comprise five new technologies that work together to create a significantly higher standard of performance for hard rock/abrasive rock drilling.
Geotech® Fixed Cutter Drill Bits
Geotech® matrix- and steel-body bits are the next generation of PDC bits.
TurboForce™ Fixed Cutter Drill Bits
TurboForce™ impregnated drill bits feature such innovations as continuous shoulder design, mass balancing, greater diamond content and active gauge geometry that enable these bits to drill greater footage, faster, in challenging turbine drilling applications.

Filter By  
Количество записей на странице Show     results per page
  TitleНазвание  DateДата
Summary Summary Geometrix Datasheet
Information and description of Geometrix cutter family
Summary Summary Cruzer™ Depth-of-Cut Rolling Element
Increased tool face control for better drilling economics and directional control
Summary Summary Fixed Cutter Bits - IADC Dull Grading
Any fixed cutter bit should be ring gauged prior to running in the hole. Stabilizers should also be calipered or gauged to verify they meet API - approved outside dimension tolerances as shown in the following table. Fixed cutter bits should not be larger than the nominal diameter.
Summary Summary Stega™ Efficient Layout Technique
The Stega efficient layout technique is a unique way to place PDC cutters into a design to maximize efficiency when backup cutters come into contact with the formation being drilled.
Summary Summary GeoTech™
Halliburton’s new GeoTech™ series of fixed cutter PDC bits blends design theory with practical application-specific knowledge to produce custom-engineered matrix and steel body bits for optimal efficiency and performance—delivering you a truly optimized bit design.
Summary Summary MegaForce™ Data Sheet
Industry's Most Robust Matrix Body Drill Bit
Summary Summary GeoTech® HE
GeoTech® HE has advanced materials and designs for improved performance in todays High Energy drilling applications.
Summary Summary Geometrix™ 4D Shaped Cutters
Four distinct geometric profiles to help improve cutting efficiency and increase control to reduce drilling costs. Halliburton now offers the largest portfolio of shaped cutters in the oil and gas industry.
Summary Summary MegaForce™ Drill Bits Brochure
Industry's Most Robust Matrix Body Drill Bit
Summary Summary SteelForce™ Drill Bits
Your solution to slow ROP is the industry’s most advanced steel body drill bit.
Summary Summary TurboForce™ Drill Bits Brochure
DRILL FURTHER, FASTER AND MORE EFFICIENTLY THROUGH HARDER FORMATIONS.
Summary Summary PDC Bit Designed with Stega™ Feature Improves ROP and Drilling Results in Horizontal Well
In the Wolfcamp formation of West Texas, where horizontal drilling benchmarks are well established, one operator wanted to improve efficiency by drilling the 8-1/2-inch curve and lateral section in a single run,
Summary Summary Cruzer Williston Basin December 2017
Operator achieves 43 percent reduction in curve drilling time with Cruzer Depth of Cut control
Summary Summary DatCISM Process Helps Reduce
MegaForce™ Drill Bits Achieve Record ROP Across Russia’s Permian Region
Summary Summary Усовершенствование долот в процессе непосредственного взаимодействия с заказчиком ( DatCI) позволило сократить срок строительства скважины до 43,5%
ОПЫТ РАБОТ В ПЕРМСКОМ КРАЕ – С 2013 Г. ПО НАСТОЯЩЕЕ ВРЕМЯ
Summary Summary Williston Basin Operator Drills Through Unconventional Well Curve in 4.9 Hours
Halliburton's Cruzer™ Depth-of-Cut Rolling Element sets basin record in North Dakota.
Summary Summary Outstanding Performance in Extremely Abrasive Application
Halliburton Drill Bits and Services was challenged to provide a bit to drill in an application which was hard and highly abrasive.
Summary Summary GeoTech, TDReam, and XR Reamer Norway Case History
Case Study for GeoTech, XR Reamer, and TDReam
Summary Summary New GeoTech™ Fixed Cutter Drill Bit cuts further and faster with less wear in Williston Basin
GeoTech™ fixed cutter drill bit was introduced to the application , which reduced the cost per foot for drilling the interval from an offset high of $28.54 to only $20.10 per foot....
Summary Summary Fixed Cutter
Fixed Cutter
Summary Summary Drill Bits
Optimized drill bits to handle a broad range of drilling challenges.
Summary Summary MegaForce™ Fixed Cutter Drill Bits
MegaForce™ matrix body designs comprise five new technologies that work together to create a significantly higher standard of performance for hard rock/abrasive rock drilling.
Summary Summary Geotech® Fixed Cutter Drill Bits
Geotech® matrix- and steel-body bits are the next generation of PDC bits.
Summary Summary TurboForce™ Fixed Cutter Drill Bits
TurboForce™ impregnated drill bits feature such innovations as continuous shoulder design, mass balancing, greater diamond content and active gauge geometry that enable these bits to drill greater footage, faster, in challenging turbine drilling applications.
Related Information

Related Information Дополнительная информация

Showcase

Previous
1 of 1
Next
MegaForce™ Drill Bits: The Industry's Most Robust Matrix Body Drill Bit
Drilling through the most challenging formations, the MegaForce™ bit delivers higher ROP and longer intervals drilled than any other bit.