Cementing Software Solutions

The most definitive test of primary cementing is the rate and ultimate recovery of the producing well. Halliburton recognizes that wellbore construction is integral to well performance and total recovery. As a result, Halliburton has developed proprietary applied-design tools to enable the design of a cement sheath for two distinctively different steps: the last step in drilling each section of the wellbore, and the first important step in completions.

Halliburton has gone beyond focusing solely on achieving a competent cement bond log and has scientifically investigated the cumulative stresses in and around the wellbore over time and the potential damage to the cement sheath created by those stresses. This has resulted in analytical software tools that enable the assessment of the risk of possible cement failure as a function of slurry placement, cement sheath properties, wellbore properties, and stress loading. The goal is to work collaboratively with our customers to design and deliver cementing systems that address the risks revealed in models in order to deliver a cement sheath able to retain annular-seal integrity for years and even decades.

Conventionally the industry has focused on short-term wellbore construction properties from cementing services such as cement placement, compressive strength, achieving desired top of cement (TOC), initial bond logs and preventing gas migration. This approach has been necessary to optimize drilling time, but does not account for maintaining zonal isolation for the life of the well. However, if at any point in the life of the well the annular seal becomes compromised, inter-zonal communication can lead to oil and gas flowing to lower pressure zones within the well instead of being produced; or it could lead to water production or annular pressure build up. Any of these may require expensive remedial services or the well to be shut in due to government regulations. In any case, valuable hydrocarbon is lost.

Wellbore challenges and achieving wellbore integrity are more complicated than ever before due to increased reservoir depth and downhole temperature and pressure. Halliburton is offering operators the means to increase the probability of wellbore-integrity success through sound technical decision-making throughout the life of the well. Along with field-proven technical solutions and laboratory-driven empirical data, Halliburton Cementing provides the most robust cementing design tool available in the industry: iCem® Service.

Engineering & Software Solutions

Filter By  
Количество записей на странице Show     results per page
  TitleНазвание  DateДата
Summary Summary Cementing Best Practice: Tuned Light Cement Rig Operations Sign in required
7-page Best Practice dated 2/14/04. Document contains special considerations required for Tuned Light Cement Blends with respect to (1) Bulk Blending, (2) Bulk Sampling, (3) Testing on Location, and (4) Slurry QC during the Job.
Summary Summary ZoneSeal Light Foam Cement System Sign in required
ZoneSeal® Light cement system is a system for performing foam cementing jobs when the calculated nitrogen volume is limited. Instead of using liquid nitrogen and a nitrogen converter, gasous nitrogen is used. The ZoneSeal Light system is a fully integrated and automated system that helps ensure that the foaming process is controlled.
Summary Summary ZoneSeal Light Foam Cement System-H07083 (A4) Sign in required
ZoneSeal® Light cement system is a system for performing foam cementing jobs when the calculated nitrogen volume is limited. Instead of using liquid nitrogen and a nitrogen converter, gasous nitrogen is used. The ZoneSeal Light system is a fully integrated and automated system that helps ensure that the foaming process is controlled.
Summary Summary Wettability Evaluation Boosts Efficiency, Economy of Cement Operations Sign in required
This paper offers an introductory overview of apparent wettability evaluation. A new technique for evaluating the apparent wettability of spacer fluids and preflushes is helping operators significantly reduce surfactant requirements and minimize the potential for costly zonal isolation problems. In an early application, the technique allowed laboratory personnel to custom-design a surfactant package for a major operator that reduced surfactant costs by as much as 50%.
Summary Summary PermSeal Solution Stops Artesian Water, Geopressured Sand Flows Sign in required
Operators drilling in deepwater off the continental shelf can use PermSeal, an acrylate monomer solution (AMS), to prevent artesian water flows and geopressured sand flows from entering the wellbore. Unchecked water flows can wash cement away from casing, making cementation of conductor pipe expensive and sometimes impossible.
Summary Summary StrataLock™ Wellbore/Formation Stabilization System Consolidates Wellbores (Paper / Article) Sign in required
StrataLock™ Wellbore/Formation Stabilization System Consolidates Wellbores (Paper / Article)
Summary Summary Integrated Controls for Precision Cementing Sign in required
Over the years, cementing equipment has been refined to maximize the performance of new materials and processes and to accommodate the requirements of increasingly complex cementing jobs. Now, technology is taking cement quality control to an even higher level with a new integrated control system.
Summary Summary Job Design and Cement System to Contain Steam and Improve Heavy Oil Recovery Sign in required
Heavy oil is found in different parts of the world and could be an important part of the answer to this demand for energy. However, heavy oil is highly viscous and traditional methods are not sufficient to produce these wells.
Summary Summary Tailor Lightweight Slurry Designs to Well Conditions and Production Plans Sign in required
White Paper by Crook, Kulakofsky, and Griffith. More than ever before, operators and service companies planning lightweight oil- and gas-well cement jobs are giving attention to casing/cement sheath integrity for the entire life of oil, gas, geothermal, and gas-storage wells.
Summary Summary Long String Cemented RapidSuite™ System with Plug and Perf Saves Time and Reduces Risk
A major customer in Mid-Continent, USA was looking to reduce risk, time and cost of their multistage, extended-reach lateral, horizontal completion campaign in the Woodford shale.
Summary Summary Norway: Top of Cement Isolation of Gas Zone on Subsea Field
In one of the major subsea producing fields in the North Sea, a hydrocarbon (HC) zone was identified. The operator’s primary challenge was to isolate this HC zone without cementing all the way into the previous casing shoe, which could potentially cause trapped pressure due to temperature cycling and collapse of the previous casing.
Summary Summary Norway: Shallow Gas Isolation - Exploration Well
Shallow gas was experienced during pilot hole drilling of a subsea exploration well in the North Sea. The operator chose to use Swell Technology™ systems combined with the conventional cementing methods.
Summary Summary ThermaLock™ Cement
ThermaLock™ cement is a specially formulated calcium phosphate cement that is both CO2 and acid resistant. The result of a joint development project for high temperature, geothermal wells, ThermaLock cement is now being promoted as an alternative for Portland cement wherever CO2 may be encountered.
Summary Summary iCem Service - Available Results
This document is a high-level overview of all the analytical results available on cementing slurries, operations and job planning.
Summary Summary iCem Service - Laboratory Validation
The University of Adelaide in Australia was selected to assess the dynamic evolution of fluid concentration in the wellbore as a function of time. This flow visualization study assessed the dynamics of fluid-to-fluid displacmeent in eccentric annuli.
Summary Summary Latex 3000 Addtive_Deepwater Data Sheet
Latex 3000™ cement additive is a liquid additive designed to lower equivalent circulating density (ECD) and impart excellent fluid-loss control, high-temperature suspension properties, and acid resistance to cement slurries.
Summary Summary SaltShield Cementing Service
SaltShield cementing service is a combination of WellLife service, an advanced modeling tool for planning and SaltShield cement, an advanced cement system designed with properties to overcome issues from simple and complex salts.
Summary Summary Latex 3000 Addtive Data Sheet
Latex 3000™ cement additive is a liquid additive designed to lower equivalent circulating density (ECD) and impart excellent fluid-loss control, high-temperature suspension properties, and acid resistance to cement slurries.
Summary Summary Micro Matrix® Cement
Micro Matrix® cement now offers solutions to special cementing problems
Summary Summary ZoneSeal Isolation Process and Foam Systems
The ZoneSeal Isolation Process helps ensure a stable, foamed slurry. The process includes a fully integrated automated system that adjusts nitrogen content to maintain constant density by accounting for increasing hydrostatic pressure with depth.
Summary Summary LockCem™ cement
LockCem™ cement is a proprietary blend of a water-tolerant resin, WellLock® resin system, with any class of Portland cement. LockCem cement provides the best of both the resin and the cement qualities, while overcoming the challenges of oilfield resin use.
Summary Summary Wellbore Integrity and Enhancer 923 Cement Agent
When blended into a specfically designed Halliburton cement system, Enhancer 923™ cement agent delivers the benefits of a lightweight cement with the unique ability to catalyze crystalline growth during curing for enhanced early compressive strength development. Additionally, it has the mechanical ability to sequester water in a manner that reduces API fluid loss while enhancing free water control.
Summary Summary Enhancer 923 Cement Agent
When blended into a specfically designed Halliburton cement system, Enhancer 923™ cement agent delivers the benefits of a lightweight cement with the unique ability to catalyze crystalline growth during curing for enhanced early compressive strength development. Additionally, it has the mechanical ability to sequester water in a manner that reduces API fluid loss while enhancing free water control.
Summary Summary Halliburton SurePlug Process™ Service
The Halliburton SurePlug Process™ service is a major advance in plugging technology. In fact, the process is patented. To date, the Halliburton SurePlug Process has been used to successfully set kickoff plugs on the first attempt in a variety of well conditions ranging from 1,500 ft to over 15,000 ft. Wellbore orientation has ranged from vertical to horizontal. Hole diameters have been from 6 in. to elliptical washouts over 3 ft.
Summary Summary WellLock Resin System
WellLock resin system can function as a gas-impermeable secondary barrier to the primary cement sheath. It is also ideal for squeeze applications and microannuli repairs or for permanent plug and abandonment. It can be solid laden or used as a pure clean fluid.
Summary Summary Super Seal II® MR Valve Float Equipment (mechanically retained)
The unique design feature of the high temperature aluminum Super Seal II® MR poppet valve is a mechanically retained sealing element custom molded or the target environment. Utilizing the field proven technology of the Super Seal II® poppet valve engineering, Halliburton offers float valve options to meet 500°F (260°C) wells with valves capable of holding pressure of up to 10,000 psi (68.9 MPa).
Summary Summary SentinelCem Cement
SentinelCem cement is specifically designed to cure losses and enable further drilling and help achieve zonal isolation by accomplishing intended top of the cement. The solution can be easily applied to losses varying from seepage to a complete loss of returns.
Summary Summary WellLock Resin provides well integrity to withstand forty-two fracturings stages
A casing leak was not successfully repaired with a casing patch. WellLock resin successfully addressed the leak path and after passing a pressure test, the well was completed with 42 fracture stages.
Summary Summary Permanent Plug Back - Setting a Plug through the BHA - New Zealand Offshore
Offshore New Zealand, an operator had drilled a pilot hole to gather petrophysical data. Once the data gathering was completed the pilot section needed to be permanently plugged, but accomplished without pulling out the BHA.
Summary Summary WellLife 684 Additive
WellLife® 684 additive is designed to increase the tensile strength of set cement without significantly decreasing the compressive strength.
Summary Summary The Family of WellLife Additives
WellLife® additives are used to modify the set-cement sheath’s mechanical properties with the goal of making it less brittle, more resilient and more elastic than conventional cement. Increasing the elasticity and resilience of the set cement sheath with the use of an additive in the WellLife family of additives helps eliminate or at least minimize damage caused by stresses induced during well activities.
Summary Summary ZoneSeal® Injection-Pump Skid Cementing Services
The pump system used in the ZoneSeal process has been cementing upgraded. The upgraded ZoneSeal injection pump skid is a compact, portable, automated pumping system used primarily with the cementing trailer and nitrogen unit for the ZoneSeal process.
Summary Summary SoluCem Cement in Horizontal Shale Wells Enhances Fracture Efficiency
Horizontal wells are normally fracture stimulated in multiple stages to help increase production. Limited entry perforating is used to achieve stimulation over a wide interval. Cementing horizontal shale wells using SoluCem™ cement provides significant benefits.
Summary Summary FineCem Cement
FineCem™ cement can be used on squeeze jobs where /ne-particle cement blends are required. In squeeze cementing operations, this cement blend can be applied where conditions make it desirable for the cement slurry to penetrate areas previously inaccessible to conventional cement slurry, such as “tight” casing leaks, gravel packs, small fractures, channels, or microannuli. FineCem™ cement slurries can also be used in slimhole conditions for production strings.
Summary Summary Super CBL™ & Super CBL™ EXP Additives
Super CBL™ and Super CBL™ EXP additives are plastic-state additives designed to help compensate for cement shrinkage. Cement shrinkage is a combination of the volume reduction caused by the chemical hydration process of cement and the fluid loss to the formation.
Summary Summary ShaleCem Cement and Latex 3000 additive
Halliburton’s ShaleCem™ cement system addresses the speci:c demands of the Haynesville Shale; and when the newest latex additive advancement from Halliburton, Latex 3000™ cement additive, is included in the blend, ShaleCem cement has high-temperature suspension properties (up to 400° F or 204.4° C), corrosion resistance and excellent ;uid loss control.
Summary Summary Resin System Facilitates Shut Off of Difficult Gas Well
An advanced, solids-free epoxy resin was applied for gas shut-off in a difficult-to abandon well in Colombia. The versatile system allowed the well to be brought back into line with governmental regulations.
Summary Summary Shale oil and a problem well-stated
The South Cana portion of The Woodford Shale presented NewField exploration worked to enhance wellbore integrity by striving to address risk of annular pressure.
Summary Summary Fresh Approach Pays Off -- Innovation of WellLock resin system
This article originally ran in the "Innovators" section of the March 2015 issue of Canada's "New Technology" Magazine. It features the development work toward what became WellLock resin by Dr. P. Jones.
Summary Summary ReverSeal™ Cement
With Tuned Cementing Solutions™ cementing systems, Halliburton has created a set of innovative fit-for-purpose solutions with the flexibility required to allow each system to be tuned specifically for a given set of wellbore conditions.
Summary Summary BondCem™ Cements
With Tuned Cementing Solutions™ cementing systems, Halliburton has created a set of innovative fit-for-purpose solutions with the flexibility required to allow each system to be tuned specifically for a given set of wellbore conditions.
Summary Summary PlugCem™ Cement
With Tuned Cementing Solutions™ cementing systems, Halliburton has created a set of innovative fit-for-purpose solutions with the flexibility required to allow each system to be tuned specifically for a given set of wellbore conditions.
Summary Summary ElastiCem® Cements
With Tuned Cementing Solutions™ cementing systems, Halliburton has created a set of innovative fit-for-purpose solutions with the flexibility required to allow each system to be tuned specifically for a given set of wellbore conditions.
Summary Summary ExtendaCem™ Cements
With Tuned Cementing Solutions™ cementing systems, Halliburton has created a set of innovative fit-for-purpose solutions with the flexibility required to allow each system to be tuned specifically for a given set of wellbore conditions.
Summary Summary ElastiSeal™ Cements
With Tuned Cementing Solutions™ cementing systems, Halliburton has created a set of innovative fit-for-purpose solutions with the flexibility required to allow each system to be tuned specifically for a given set of wellbore conditions.
Summary Summary ArcticSeal™ Cement
With Tuned Cementing Solutions™ systems, Halliburton has created a set of innovative fit-for-purpose solutions with the flexibility required to allow each system to be tuned specifically for a given set of wellbore conditions.
Summary Summary FracCem™ Cements
With Tuned Cementing Solutions™ cementing systems, Halliburton has created a set of innovative fit-for-purpose solutions with the flexibility required to allow each system to be tuned specifically for a given set of wellbore conditions.
Summary Summary ThermaSeal™ Cements
With Tuned Cementing Solutions™ cementing systems, Halliburton has created a set of innovative fit-for-purpose solutions with the flexibility required to allow each system to be tuned specifically for a given set of wellbore conditions.
Summary Summary FracSeal™ Cement
With Tuned Cementing Solutions™ systems, Halliburton has created a set of innovative fit-for-purpose solutions with the flexibility required to allow each system to be tuned specifically for a given set of wellbore conditions.
Summary Summary ShaleSeal™ Cement
With Tuned Cementing Solutions™ systems, Halliburton has created a set of innovative fit-for-purpose solutions with the flexibility required to allow each system to be tuned specifically for a given set of wellbore conditions.
Summary Summary AquaSeal™ Cement
With Tuned Cementing Solutions™ systems, Halliburton has created a set of innovative fit-for-purpose solutions with the flexibility required to allow each system to be tuned specifically for a given set of wellbore conditions.
Summary Summary ExpandaSeal™ Cement
With Tuned Cementing Solutions™ cementing systems, Halliburton has created a set of innovative fit-for-purpose solutions with the flexibility required to allow each system to be tuned specifically for a given set of wellbore conditions.
Summary Summary SteamCem™ Cements
With Tuned Cementing Solutions™ cementing systems, Halliburton has created a set of innovative fit-for-purpose solutions with the flexibility required to allow each system to be tuned specifically for a given set of wellbore conditions.
Summary Summary HalCem™ Cements
With Tuned Cementing Solutions™ cementing systems, Halliburton has created a set of innovative fit-for-purpose solutions with the flexibility required to allow each system to be tuned specifically for a given set of wellbore conditions.
Summary Summary ReverCem™ Cement
With Tuned Cementing Solutions™ cementing systems, Halliburton has created a set of innovative fit-for-purpose solutions with the flexibility required to allow each system to be tuned specifically for a given set of wellbore conditions.
Summary Summary SqueezeSeal™ Cement
With Tuned Cementing Solutions™ cementing systems, Halliburton has created a set of innovative fit-for-purpose solutions with the flexibility required to allow each system to be tuned specifically for a given set of wellbore conditions.
Summary Summary ExpandaCem™ Cements
With Tuned Cementing Solutions™ cementing systems, Halliburton has created a set of innovative fit-for-purpose solutions with the flexibility required to allow each system to be tuned specifically for a given set of wellbore conditions.
Summary Summary VersaSeal™ Cements
With Tuned Cementing Solutions™ cementing systems, Halliburton has created a set of innovative fit-for-purpose solutions with the flexibility required to allow each system to be tuned specifically for a given set of wellbore conditions.
Summary Summary ShaleCem™ Cement
With Tuned Cementing Solutions™ cementing systems, Halliburton has created a set of innovative fit-for-purpose solutions with the flexibility required to allow each system to be tuned specifically for a given set of wellbore conditions.
Summary Summary CorossaSeal™ Cement
With Tuned Cementing Solutions™ cementing systems, Halliburton has created a set of innovative fit-for-purpose solutions with the flexibility required to allow each system to be tuned specifically for a given set of wellbore conditions.
Summary Summary GraniteCem™ Cements
With Tuned Cementing Solutions™ cementing systems, Halliburton has created a set of innovative fit-for-purpose solutions with the flexibility required to allow each system to be tuned specifically for a given set of wellbore conditions.
Summary Summary ThermaCem™ Cements
With Tuned Cementing Solutions™ cementing systems, Halliburton has created a set of innovative fit-for-purpose solutions with the flexibility required to allow each system to be tuned specifically for a given set of wellbore conditions.
Summary Summary SwiftCem™ Cements
With Tuned Cementing Solutions™ cementing systems, Halliburton has created a set of innovative fit-for-purpose solutions with the flexibility required to allow each system to be tuned specifically for a given set of wellbore conditions.
Summary Summary EconoCem™ Cement
With Tuned Cementing Solutions™ cementing systems, Halliburton has created a set of innovative fit-for-purpose solutions with the flexibility required to allow each system to be tuned specifically for a given set of wellbore conditions.
Summary Summary PlugSeal™ Cement
With Tuned Cementing Solutions™ cementing systems, Halliburton has created a set of innovative fit-for-purpose solutions with the flexibility required to allow each system to be tuned specifically for a given set of wellbore conditions.
Summary Summary CTSeal™ Cement
With Tuned Cementing Solutions™ cementing systems, Halliburton has created a set of innovative fit-for-purpose solutions with the flexibility required to allow each system to be tuned specifically for a given set of wellbore conditions.
Summary Summary SteamSeal™ Cements
With Tuned Cementing Solutions™ cementing systems, Halliburton has created a set of innovative fit-for-purpose solutions with the flexibility required to allow each system to be tuned specifically for a given set of wellbore conditions.
Summary Summary FillSeal™ Cement
With Tuned Cementing Solutions™ cementing systems, Halliburton has created a set of innovative fit-for-purpose solutions with the flexibility required to allow each system to be tuned specifically for a given set of wellbore conditions.
Summary Summary CBMSeal™ Cement
With Tuned Cementing Solutions™ cementing systems, Halliburton has created a set of innovative fit-for-purpose solutions with the flexibility required to allow each system to be tuned specifically for a given set of wellbore conditions.
Summary Summary ExtendaSeal™ Cement
With Tuned Cementing Solutions™ cementing systems, Halliburton has created a set of innovative fit-for-purpose solutions with the flexibility required to allow each system to be tuned specifically for a given set of wellbore conditions.
Summary Summary SqueezeCem™ Cement
With Tuned Cementing Solutions™ cementing systems, Halliburton has created a set of innovative fit-for-purpose solutions with the flexibility required to allow each system to be tuned specifically for a given set of wellbore conditions.
Summary Summary HalSeal™ Cements
With Tuned Cementing Solutions™ cementing systems, Halliburton has created a set of innovative fit-for-purpose solutions with the flexibility required to allow each system to be tuned specifically for a given set of wellbore conditions.
Summary Summary CTCem™ Cement
With Tuned Cementing Solutions™ cementing systems, Halliburton has created a set of innovative fit-for-purpose solutions with the flexibility required to allow each system to be tuned specifically for a given set of wellbore conditions.
Summary Summary SwiftSeal™ Cements
With Tuned Cementing Solutions™ cementing systems, Halliburton has created a set of innovative fit-for-purpose solutions with the flexibility required to allow each system to be tuned specifically for a given set of wellbore conditions.
Summary Summary iCem Service - Increasing the Probability of Wellbore Integrity
iCem Service enables operators to evaluate critical variables before the cementing operation. iCem Service is the most robust cementing design tool in the industry and it helps to dramatically increase the probability of wellbore integrity.
Summary Summary SoluCem Cement - Enhance Fracture Efficiency in Horizontal Shale Wells
Reducing near-wellbore entry friction. Horizontal wells are normally fracture stimulated in multiple stages to help increase production. Limited entry perforating is used to achieve stimulation over a wide interval. Cementing horizontal shale wells using SoluCem™ cement provides significant benefits. SoluCem cement is engineered to be more soluble in acid (up to 95%) than conventional cements. It provides sufficient compressive strength, provides excellent yield for a given density, and can be foamed to provide significant elasticity when necessary.
Summary Summary eRedBook® Mobile app – Free Smartphone application debuts
HOUSTON – (March 20, 2012) – Halliburton (NYSE: HAL) announced today the launch of its eRedBook® Mobile application...
Summary Summary Casing Rotation
Once casing has been run to depth and the mud circulated and conditioned; the casing is cemented. During cementing; the casing string can be rotated and/or reciprocated to enhance excess wall-cake removal and assist with cement placement to help establish the hydraulic seal. The following video simulates cement placement without casing rotation versus with casing rotation.
Summary Summary Protech CRB™ Centralizers
Halliburton's Protech CRB centralizers are the field-proven, cost-effective alternative to conventional centralizer subs.
Summary Summary VariCem™ Cements
With Tuned Cementing Solutions™ cementing systems, Halliburton has created a set of innovative fit-for-purpose solutions with the flexibility required to allow each system to be tuned specifically for a given set of wellbore conditions.
Summary Summary VersaCem™ Cements
With Tuned Cementing Solutions™ cementing systems, Halliburton has created a set of innovative fit-for-purpose solutions with the flexibility required to allow each system to be tuned specifically for a given set of wellbore conditions.
Summary Summary Cementing Systems and Services
These include a system that designs slurries based on specific well conditions, a resilient slurry system designed using a modeling software service, and a cement system that can develop compressive strengths faster than others at the same density.
Summary Summary Cementing Software Solutions
Cementing Engineering & Software Solutions
Summary Summary Mud Removal
description to come..
Summary Summary Structured Workflow Processes
Tuned Solutions is the culmination of over 85 years of Halliburton’s continuously evolving cementing technology.
Summary Summary SurePlug™ Process
Enhances hole cleaning, job design, materials selection, and plug-setting operations.
Summary Summary eRedbook® Software
A complete digital toolkit that offers quick and reliable calculators for computations used in daily operations.
Summary Summary Job Design
In addition to designing for effective cement slurry placement, cementing design software can analyze the casing, cement sheath, and surrounding formation to determine the optimum mechanical properties that the sealant will need to go the distance
Summary Summary FLECS™ Control System
Designed to make cementing more consistent in the most adverse conditions.
Summary Summary WellLife® III Cementing Service
WellLife® III cementing service is a three-tier solution to help address the the destabilization of the annular seal in aging wells brought on by continual formation and pressure changes.
Summary Summary iCem® Service
Runs various simulations according to specific wellbore architecture design data provided by the operator. Based on computational fluid dynamics and finite element analysis, the simulations help enable the evaluation and optimization of cement designs to specifically address the operational and long-term parameters of individual wells.
Summary Summary ZoneSeal® Isolation Process
A fully engineered zonal isolation process with automated controls to deliver the benefits of light-weight (foam) cement during placement and for the life of the well.
Summary Summary SqueezeSeal™ Cement
Designed to form an effective squeeze cement slurry in either cased or open hole intervals.
Summary Summary WellLife® Service
Models the integrity of the cement sheath and the risk of its failure as it is subjected to different well operations.