Deepwater Cementing

Halliburton has been helping operators achieve wellbore integrity in offshore wells since the first truly offshore well was cemented in the Gulf of Mexico in 1947.  Today Halliburton offers the DeepAssurance™ Cementing Solution Suite, the most comprehensive suite of cementing solutions in the industry for addressing the complexities of offshore cementing challenges no matter how deep or ultra-deep the water.     

DeepAssurance Cementing Solution Suite offers:

  • Casing equipment that delivers efficiencies while running and landing casing to depth.
  • Selection of fluids for a highly-effective wellbore conditioning fluid train.
  • Mechanically and chemically optimized cementing systems that benefit from the largest selection of additives in the industry, many of them designed specifically for deepwater challenges.
  • The most reliable mixing and pumping systems in the industry.

Filter By  
Количество записей на странице Show     results per page
  TitleНазвание  DateДата
Summary Summary HCS AdvantageOne™ offshore cementing system was featured in Upstream Technology Magazine
The HCS AdvantageOne™ offshore cementing system is the next generation of cementing and well-control pump performance for ultra-deep water.
Summary Summary Cementing Best Practice: Tuned Light Cement Rig Operations Sign in required
7-page Best Practice dated 2/14/04. Document contains special considerations required for Tuned Light Cement Blends with respect to (1) Bulk Blending, (2) Bulk Sampling, (3) Testing on Location, and (4) Slurry QC during the Job.
Summary Summary ZoneSeal Light Foam Cement System-H07083 (A4) Sign in required
ZoneSeal® Light cement system is a system for performing foam cementing jobs when the calculated nitrogen volume is limited. Instead of using liquid nitrogen and a nitrogen converter, gasous nitrogen is used. The ZoneSeal Light system is a fully integrated and automated system that helps ensure that the foaming process is controlled.
Summary Summary Integrated Controls for Precision Cementing Sign in required
Over the years, cementing equipment has been refined to maximize the performance of new materials and processes and to accommodate the requirements of increasingly complex cementing jobs. Now, technology is taking cement quality control to an even higher level with a new integrated control system.
Summary Summary Streamlined Well Construction Eliminates 71 Days of Rig Time, Saving Consortium USD 90 Million
Halliburton sets new deepwater benchmark in brazil's deepwater libra field
Summary Summary 20,000 psi H-Manifold
Halliburton's 20,000 psi H-manifold combined with the most reliable pumps in the industry provides the pumping pressure capacity required for safe cementing operations in the more extreme high-pressure formations.
Summary Summary SaltShield Cementing Service
SaltShield cementing service is a combination of WellLife service, an advanced modeling tool for planning and SaltShield cement, an advanced cement system designed with properties to overcome issues from simple and complex salts.
Summary Summary ThermaLock™ Cement
ThermaLock™ cement is a specially formulated calcium phosphate cement that is both CO2 and acid resistant. The result of a joint development project for high temperature, geothermal wells, ThermaLock cement is now being promoted as an alternative for Portland cement wherever CO2 may be encountered.
Summary Summary iCem Service - Laboratory Validation
The University of Adelaide in Australia was selected to assess the dynamic evolution of fluid concentration in the wellbore as a function of time. This flow visualization study assessed the dynamics of fluid-to-fluid displacmeent in eccentric annuli.
Summary Summary ZoneSeal Isolation Process and Foam Systems
The ZoneSeal Isolation Process helps ensure a stable, foamed slurry. The process includes a fully integrated automated system that adjusts nitrogen content to maintain constant density by accounting for increasing hydrostatic pressure with depth.
Summary Summary Latex 3000 Addtive_Deepwater Data Sheet
Latex 3000™ cement additive is a liquid additive designed to lower equivalent circulating density (ECD) and impart excellent fluid-loss control, high-temperature suspension properties, and acid resistance to cement slurries.
Summary Summary LockCem™ cement
LockCem™ cement is a proprietary blend of a water-tolerant resin, WellLock® resin system, with any class of Portland cement. LockCem cement provides the best of both the resin and the cement qualities, while overcoming the challenges of oilfield resin use.
Summary Summary Commander 500 Top-Drive Cementing Head - Deep Water
The Commander™ 500 top-drive cementing head with wireless remote control allows for continuous pumping during the launch of balls or darts for uninterrupted fluid flow, helping protect the formation from surge pressures caused when circulation is re-established. It also enables on-going rotation and reciprocation of casing during cementing operations to help facilitate full coverage; and can be manually or wirelessly remotely actuated.
Summary Summary DeepFX-L Additive
DeepFX-L additive is a single additive to address two challenges designed to enable logistics efficiencies and to be blended with cementing systems to help address both shallow water flow and gas migration conditions.
Summary Summary The HCS AdvantageOne™ offshore cementing system
The HCS AdvantageOne™ offshore cementing system is the next generation of cementing and well-control pumping system.
Summary Summary The Family of WellLife Additives
WellLife® additives are used to modify the set-cement sheath’s mechanical properties with the goal of making it less brittle, more resilient and more elastic than conventional cement. Increasing the elasticity and resilience of the set cement sheath with the use of an additive in the WellLife family of additives helps eliminate or at least minimize damage caused by stresses induced during well activities.
Summary Summary SuperFill Surge Reduction Equipment
Running casing in the well at an operationally efficient speed without damaging the formation due to surge pressure is a long-standing challenge in the oil and gas industry. With Halliburton's SuperFill surge reduction equipment, a reliable auto-fill system, running speeds can be optimized while protecting the formation.
Summary Summary WellLock Resin System
WellLock resin system can function as a gas-impermeable secondary barrier to the primary cement sheath. It is also ideal for squeeze applications and microannuli repairs or for permanent plug and abandonment. It can be solid laden or used as a pure clean fluid.
Summary Summary The Isolizer™ centralizer
The Isolizer™ centralizer is an alternative solution to intercasing centralizer subs (ICCS) for tight-tolerance applications.
Summary Summary SentinelCem Cement
SentinelCem cement is specifically designed to cure losses and enable further drilling and help achieve zonal isolation by accomplishing intended top of the cement. The solution can be easily applied to losses varying from seepage to a complete loss of returns.
Summary Summary Fresh Approach Pays Off -- Innovation of WellLock resin system
This article originally ran in the "Innovators" section of the March 2015 issue of Canada's "New Technology" Magazine. It features the development work toward what became WellLock resin by Dr. P. Jones.
Summary Summary WellLock Resin provides well integrity to withstand forty-two fracturings stages
A casing leak was not successfully repaired with a casing patch. WellLock resin successfully addressed the leak path and after passing a pressure test, the well was completed with 42 fracture stages.
Summary Summary Permanent Plug Back - Setting a Plug through the BHA - New Zealand Offshore
Offshore New Zealand, an operator had drilled a pilot hole to gather petrophysical data. Once the data gathering was completed the pilot section needed to be permanently plugged, but accomplished without pulling out the BHA.
Summary Summary Rigless Micro-channel Remedation Using WellLock Resin
A customer in New South Wales, Australia had an onshore coal seam gas well that had undergone an unsatisfactory plug-to-abandon process by a third-party cementing services company. WellLock resin successfully sealed a very narrow micro-channel securing the well for permanent abandonment.
Summary Summary ZoneSeal® Injection-Pump Skid Cementing Services
The pump system used in the ZoneSeal process has been cementing upgraded. The upgraded ZoneSeal injection pump skid is a compact, portable, automated pumping system used primarily with the cementing trailer and nitrogen unit for the ZoneSeal process.
Summary Summary Protech DRB and Protech CRB Centralizer Service
Protech DRB and Protech CRB are Halliburton product lines providing composite technology centralizers through a licensed agreement with Eni S.p.A.* Protech centralizers are currently provided through three facilities located in Ravenna, Italy; Aberdeen, Scotland; and Houston, Texas.
Summary Summary iCem Service - Increasing the Probability of Wellbore Integrity
iCem Service enables operators to evaluate critical variables before the cementing operation. iCem Service is the most robust cementing design tool in the industry and it helps to dramatically increase the probability of wellbore integrity.
Summary Summary Protech CRB™ Centralizers
Halliburton's Protech CRB centralizers are the field-proven, cost-effective alternative to conventional centralizer subs.
Summary Summary EZ Drill® SVB Squeeze Packer
The EZ Drill® SVB Squeeze Packer has a brass mandrel that is stronger and more ductile than the cast-iron mandrel in EZ Drill SV Squeeze Packers. As a result, the packer can absorb greater tensile and impact loads as well as greater internal pressures.
Summary Summary VersaFlex® Low ECD System
Ideal for deep water and mature assets, Halliburton's VersaFlex® Low Equivalent Circulating Density (ECD) system was developed to handle low pressure formations and fracture gradient sensitive wells.
Summary Summary VersaFlex® Big Bore System
Designed specifically for deepwater and subsea markets, the VersaFlex® Big Bore system is ideal for complex well conditions. The VersaFlex Big Bore system does not require landing in a pre-determined profile, helping to eliminate complications common to positioning in mudline/casing wellhead profiles.
Summary Summary XtremeGrip™ Expandable Liner Hanger System
The Halliburton XtremeGrip™ expandable liner hanger system takes the standard VersaFlex liner hanger to the next level. This high-performance, advanced metal sealing technology provides a fully compliant metal seal with a fully bonded resilient elastomeric seal to account for imperfections in the parent casing.
Summary Summary Wellbore Cleaning Technology
Halliburton's CleanWell® system technology specializes in mechanical wellbore cleaning solutions designed to deliver value-driven results throughout the well construction process.
Summary Summary Swellpacker® Zonal Isolation System
The Swellpacker® swellable elastomer zonal isolation system is a packer based on the swelling properties of rubber in hydrocarbon.
Summary Summary X-Trieve Retrievable Production Packers
This family of premium retrievable packer solutions is made up of the X-Trieve HC and X-Trieve HP designs, and represents the highest level of capability within the retrievable packer product line.
Summary Summary DepthStar® Tubing-Retrievable Safety Valve
The DepthStar® Tubing Retrievable Safety Valve (TRSV) is a revolutionary new concept in the realm of surface controlled subsurface safety valves.
Summary Summary Plug Setting Aids
The CST™ cement support tool, tubing release tool (TRT), bottomhole kickoff assembly (BHKA) disconnect tool, and bottomhole kickoff assembly (BHKA) tool system were designed to aid in setting balanced and competent cement plugs during remedial and primary cementing operations.
Summary Summary WellLock® Resin
WellLock® resin can act as an annular barricade against water and gas leaks.
Summary Summary Tuned® Light Cement
Designed to perform effectively in wells with where loss of circulation with conventional weighted cement slurries might occur.
Summary Summary Slurries
Since no single slurry, or family of slurries, is ideal for every well condition, choices allow the optimal solution for each combination of conditions and needs.
Summary Summary Corrosive Environments
Increasingly common, wellbores intersect massive salt and/or CO2 zones that can cause mechanical destruction and/or chemical erosion of the cement sheath, which may lead to damaged casing and in severe cases may result in a lost well.
Summary Summary Deepwater Cementing
Today Halliburton offers the DeepAssurance™ Cementing Solution Suite, the most comprehensive suite of cementing solutions in the industry for addressing the complexities of offshore cementing challenges
Summary Summary BridgeMaker™ LCM Spacer Fluid
An environmentally friendly blend designed to overcome lost circulation while preparing the wellbore to receive cement.
Summary Summary Narrow Pressure Margin Software Design
Halliburton provides simulations that can model three-dimensional displacement and mud erodibility based on fluid volumes and compressibility, rheological hierarchy, pump rates and wellbore geometry
Summary Summary Narrow Pressure Margin Alternative Cement Placement
As water depths and distance to shore increase, operational challenges and budget pressures intensify.
Summary Summary Narrow Pressure Margin Lost Circulation
Lost circulation is the partial or complete loss of drilling fluid and/or cement slurry to the formation during drilling or cementing operations or both.
Summary Summary LockCem™ and LockSeal™ Cement Systems
LockCem™ cement represents a Portland cement and resin blend; LockSeal™ cement is the foam version of the slurry system.
Summary Summary FLO-CHEK® System
The FLO-CHEK® system is an externally catalyzed, soluble silicate system designed to control subsurface brine in production / injection wells in the area near the wellbore.
Summary Summary Liquid Additive Automated Metering
The Liquid Additive Automated Metering & Pumping unit has been designed for offshore rigs for use during cementing operations to accurately meter all types of liquid additives.
Summary Summary Foam Wiper Balls Darts
The foam wiper ball and dart are designed to wipe drillpipe or tubing string clean of cement, fluids or debris and can be used to separate fluids.
Summary Summary Gel Modifier 750™ Anti Fluid Migration Additive
Gel Modifier 750™ anti-fluid migration additive helps prevent migration by reducing the gel structure of cement slurries and reducing transition times without negatively affecting the slurry viscosity, early strength, and thickening time.
Summary Summary Annular Pressures
Pressure behind casing caused by expansion of fluid/gas due to thermal expansion from warmer wellbore or production fluids or due to fluid/gas migration higher in the annulus from higher-pressure zones below.
Summary Summary Narrow Pressure Margin Fluid Systems
Velocity and flow rate of spacers and cements during placement affect the probability of efficient displacement of preceding wellbore and annular fluids, which in turn affects complete cement placement.
Summary Summary iCem® Service
Runs various simulations according to specific wellbore architecture design data provided by the operator. Based on computational fluid dynamics and finite element analysis, the simulations help enable the evaluation and optimization of cement designs to specifically address the operational and long-term parameters of individual wells.
Summary Summary Fidelis Stage Cementer
A precision-built, multiple-stage cementing tool constructed to enable placement of cement in stages and to withstand the cyclic loading from geo-mechanical stresses throughout the life of the well.
Summary Summary SuperFill™ Auto-Fill Equipment
Halliburton offers auto-fill assemblies that allow wellbore fluids to enter the casing as it is being run into the wellbore. Surge reduction float shoes and float collars reduce the effective wellbore surge pressure to help operators avoid losing valuable drilling fluid and damaging the formation.
Summary Summary Lightweight Cement
Lightweight cement can be achieved in one of three ways: water extended, injection of gas (foamed cement), or by adding low-specific-gravity microspheres or other enhancing additives.
Summary Summary ZoneSeal® Isolation Process
A fully engineered zonal isolation process with automated controls to deliver the benefits of light-weight (foam) cement during placement and for the life of the well.
Summary Summary GasStop™ Cement
Performs effectively in wells with overpressured zones with the potential for fluid influx into the annulus through unset cement using specially tuned systems.
Summary Summary SentinelCem™ Cement
Specifically designed to cure losses and enable further drilling by achieving early static gel strength; helps achieve zonal isolation by accomplishing intended top of cement.
Summary Summary FlexPlug® Lost Circulation Service
Quick and cost effective solution for stopping lost circulation in natural or induced fractures, vugs, channels in weak zones, or flowing over-pressured zones.
Summary Summary PhenoSeal™ Lost Circulation Material
Can reduce the fluid loss of cement slurries.
Summary Summary Latex 2000™ Cement Additive
Excellent fluid-loss control, high-temperature suspension properties, and acid resistance to cement slurries.
Summary Summary Latex 3000™ Cement Additive
A liquid additive designed to lower equivalent circulating density (ECD) and to impart excellent fluid-loss control, high-temperature suspension properties, and acid resistance to cement slurries.
Summary Summary Halad®-413 Fluid-Loss Additive
Provides excellent fluid-loss control in high temperature wells, especially when used on densified slurries or slurries with high salt concentrations due to its dispersing properties.
Summary Summary Halad®-567 Fluid Loss Additive
A fluid-loss additive made from synthetic polymer technology which is compatible with salt, seawater, and CaCl2 and effective up to 350°F (176.7°C) without over-retarding at temperatures as low as 80°F (26.7°C); it is not a strong dispersant so it can be used in normal and heavyweight slurries.
Summary Summary Halad®-322 Fluid-Loss Additive
A fluid-loss additive designed for use in low-temperature wells (below 180°F or 82.2°C) to prevent retardation of compressive-strength development; acts as a dispersant as well.
Summary Summary DeepFX™-L Additive
DeepFX-L additive: A single additive to provide fluid-loss control and shorten transition time to help address shallow water flow concerns.
Summary Summary Halad®-344 Fluid Loss Additive
Helps control fluid loss is non-retarding, and is compatible with freshwater and seawater.
Summary Summary Halad®-600 LE+ Fluid Loss Additive
Helps control fluid loss in environmentally sensitive areas between 125°F (51.7°C) and 300°F (148.9°C), acts as a mild retarder, gel breaker, and dispersant.
Summary Summary Halad®-300L Fluid-Loss Additive
Designed to replace Halad-200L additive, it helps control fluid loss without breaking foamed cement structures and is effective from 100°F (37.8°C) and higher than 400°F (204.4°C).
Summary Summary CFR-8™ Cement Friction Reducer
Cement Friction Reducer – An environmentally acceptable cement friction-reducing additive that reduces apparent viscosity and improves the rheological properties of cement slurries which is compatible with saturated salt solutions and temperatures greater than 60°F (15.6°C).
Summary Summary HR®-6L Cement Retarder
A 40% active solution of a chemically modified lignosulfonate, can be used to retard the setting of all classes of cement and Pozmix® cement, can be used at temperatures up to 210°F (99°C), as a secondary effect HR-6L retarder acts as a slight dispersant.
Summary Summary HR®-25 Cement Retarder
A high-temperature retarder/intensifier, can be used at bottomhole circulating temperatures ranging from 200°F (93°C) to >400°F (>204°C) with a primary retarder, used alone it can gel cement.
Summary Summary HR®-5 Retarder
A chemically modified lignosulfonate used to retard the setting of all classes of cement and Pozmix® cement, provides more predictable thickening times than HR-4 and can be used at bottomhole circulating temperatures up to 210°F (99°C), as a secondary effect HR-5 retarder acts as a slight dispersant
Summary Summary HR®-4 Retarder
A low temperature calcium lignosulfonate retarder for intermediate wells with bottomhole circulating temperatures up to 170°F (77°C) that can be used to retard all types of cement and Pozmix® cements, as a secondary effect HR-4 retarder acts a slight dispersant
Summary Summary HCS AdvantageOne™ Cementing Skid
The HCS AdvantageOne™ skid system is the next generation of cementing and well-control pump performance for ultra-deep water.
Summary Summary SCR-100™ Retarder
A nonlignosulfonate cement retarder that helps simplify the design of thixotropic slurries.
Summary Summary HR-800™ Cement Retarder
Non-lignin based cement retarder capable of retarding cement at bottomhole circulating temperatures between 80°F (27°C) and 220°F (104°C), HR-800 retarder provides good strength development and may be effective in water-extended slurries, long cement columns or cooler temperatures.
Summary Summary SCR-200L™ Cement Retarder
SCR-200L liquid retarder is a synthetic, nonhazardous cement retarder specifically for high-temperature designs in environmentally sensitive locations.
Summary Summary HR®-817 Cement Retarder
A non-lignin based, high-temperature retarder (220°F/104°C to 350°F/177°C) that is North Sea approved, an economical alternative to commonly used high-temperature retarders.
Summary Summary Reverse Circulation Cementing
Halliburton has the equipment and experienced personnel to support reverse cementing operations where cement is pumped down the annulus with well fluid returned through the casing.
Summary Summary Riserless Cementing
Routine challenges associated with the riserless or top-hole sections involve low fracture gradients in these young, unconsolidated sands; low temperatures; and shallow drilling hazards such as shallow water flows or hydrate formations. These require not only reliable equipment and experienced personnel, but specialized fluid systems for competent cement placement to maximize casing support and isolation for drilling operations.
Summary Summary Narrow Pressure Margin
The margin between pore pressure and fracture gradient may be as narrow as 0.2 lbm/gal, creating challenges throughout drilling operations including running and landing casing to depth, hole conditioning, and achieving complete cement placement/coverage for successful zonal isolation.
Summary Summary Narrow Pressure Margin Casing Equipment
Specific considerations need to be given to casing standoff and casing run-in speeds. Providing for optimized standoff of the casing helps to enable complete coverage of the slurry system for successful zonal isolation.
Summary Summary Reliability - Well Integrity
An imperative in the deep water arena, Halliburton views reliability as a critical attribute that is reinforced in every phase of delivery, from solution design to operational processes. Beyond maintenance and the theoretical probability of failure, reliability is the capacity for a procedure, component or system to function as specified (quality) under a stated condition for a specified period of time.
Summary Summary Plug Setting
Setting chemical (cement or resin) plugs can be challenging because of low temperatures, hole stability issues, limited volumes and fluid contamination. However, at some point in the overall life of the well, plugs will be required for reasons such as directional drilling, formation testing, zonal isolation, and well abandonment.
Summary Summary The Protech™ Centralizer Family of Products
Halliburton’s Protech™ centralizer family of casing attachments provide a unique solution to casing centralization that utilizes the latest resin, carbon fiber and ceramic technologies to apply wear resistant and/or flow enhancing centralizers, deflectors or protectors directly to customer tubulars.
Summary Summary Isolizer™ Centralizer
The Isolizer™ centralizer is an optimized solution for tight-tolerance applications.
Summary Summary SSR-II™ Subsurface Release II Cementing Plug System
Used to remotely release cementing plugs at a selected subsurface depth.
Summary Summary Commander™ 1000 Top-Drive Cementing Head
Commander™ 1000 top-drive cementing head is designed for offshore operations to surface launch balls or darts in order to operate subsea plug sets and associated tools.
Summary Summary ThermaLock™ Cement
A specially formulated calcium phosphate cement that is both CO2 and acid resistant.
Summary Summary Econolite™ Additive
Increases slurry volume, decreases density, and typically acts as an accelerator.
Summary Summary Hollow Glass Spheres (HGS)
Hollow glass spheres used to decrease slurry density.
Summary Summary GasCon 469™ Additive
A liquid extender additive designed to help increase slurry stability and control free water.
Summary Summary Microbeads™ Mineral Spheres Additive
Can help regulate the slurry density of a cement blend and improve compressive-strength development.
Summary Summary Silicalite Cement Additive
Silica powder used to increase slurry volume, reduce density, and increase compressive strength.
Summary Summary WellLife® 708 Additive
WellLife® 708 additive is designed to increase the ductility of set cement while helping to reduce the overall specific gravity of the slurry.
Summary Summary WellLife® Service
Models the integrity of the cement sheath and the risk of its failure as it is subjected to different well operations.
Summary Summary ChannelSeal® Process
Enhances the ability of the slurry to fill washouts and to completely surround the casing prior to cementing.
Summary Summary GLOPOINTS™ Beads
Effective tracer additive when visual confirmation of fluid returns is required for a riserless casing string.
Summary Summary WellLife® 734 Additive
Can be used to enhance the tensile strength of set cement and can help to mitigate any undesirable effects of shrinkage that may occur during cement slurry hydration in temperatures up to 600°F (316°C).
Summary Summary CAST-M™
The CAST-M™ tool provides high resolution cement and casing evaluation images
Summary Summary Focused Oval Pad
Wireline tool provides representative samples of a well's formation fluid, and can monitor up to eight fluid and formation properties. Also provides pressure gradient testing.
Summary Summary CO2 Resistant Cementing Solution
Designed to prevent or stop the flow of unwanted fluid and gas in the cemented annulus at any time during the life of the well, after well abandonment (project closure phase), and the post closure phase of the project – an environmental imperative when CO2 is being stored underground in CCS (carbon capture & storage) and CO2 EOR projects or when CO2 is found in the hydrocarbon producing formation surrounding a producing well.
Summary Summary CO2 Resistant Cementing Solution
Designed to prevent or stop the flow of unwanted fluid and gas in the cemented annulus at any time during the life of the well, after well abandonment (project closure phase), and the post closure phase of the project – an environmental imperative when CO2 is being stored underground in CCS (carbon capture & storage) and CO2 EOR projects or when CO2 is found in the hydrocarbon producing formation surrounding a producing well.
Summary Summary Thermatek® Fluids
A new generation of chemical treatments used to provide engineered solutions when drilling or producing fractured, unconsolidated or watered out formations.
Summary Summary Chemical-Program-Management
At Multi-Chem, our job is to protect your investments. To help us achieve this, we establish a service plan with our customers to continuously monitor and help improve all aspects of the chemical-application program
Summary Summary Flow-Assurance-Engineering
With the immense investments and logistics necessary to operate in deepwater, it is imperative to know that everything in and around your system is working at its peak performance.
Summary Summary N-SOLATE Packer Fluid Systems
High performance insulating packer fluids designed to reduce undesired heat flow by controlling both conduction and convection
Summary Summary BaraECD® High-Performance Non-Aqueous Fluid System
Halliburton’s BaraECD® High-Performance Non-Aqueous Fluid System has a rheological profile designed to provide low, controlled Equivalent Circulating Density in wells with extreme narrow pore pressure/fracture gradients, reducing the risk of drilling induced fractures.
Summary Summary FlexPlug® Lost Circulation Service
Quick and cost effective engineered, chemical solution for stopping lost circulation in natural or induced fractures, vugs, channels in weak zones, or flowing over-pressured zones.
Summary Summary STEELSEAL® Lost Circulation Material
Resilient, dual composition carbon-based material that increases lubricity
Summary Summary Mechanical Integrity Testing
State and Federal agencies require scheduled Mechanical Integrity Tests (MIT) of wells used for the underground disposal of hazardous materials.
Summary Summary SPIDR® - Self Powered Intelligent Data Retriever
SPIDR® is an acronym for Self Powered Intelligent Data Retriever.
Related Information

Related Information Дополнительная информация

Showcase

Previous
1 of 3
Next
SaltShield™ Cement
SaltShield™ cement helps enable placement of full columns of cement across the salt zone...
HCS AdvantageOne™ Cementing Skid
The HCS AdvantageOne™ skid system is the next generation of cementing and well-control pump performance for ultra-deep water.
iCem® Service
Halliburton invested two years and significant resources in developing the most advanced analytical tool in the industry, iCem® Service.