Plug and Abandonment

Cement plugs are used for various reasons, including

  • Solving a lost-circulation problem during drilling operations by spotting a cement plug across the thief zone and then drilling back through the plug;
  • Plugging a zone or abandonment of a well by sealing off selected intervals, a dry hole or a depleted well;
  • Sidetracking or to initiate directional drilling to help guide the drill bit in the desired direction;
  • Provide an anchor for an openhole test, particularly when the zone to be tested is significantly off bottom
  • Other remedial work

It is essential to these operations that a competent cement plug is placed the first time. Properly placing the designed cement plug helps reduce nonproductive rig time, minimize wasted material, and mitigate the need for additional cementing services.

Plugging oil or gas wells is a very common operation. When required, plugs are designated for a specific place in the well though usually not at the bottom of the wellbore. Thus, the challenge is placing a relatively small amount of cement slurry above a larger volume of wellbore fluid. As a result, a sound engineering design that addresses the major factors affecting plug success is necessary. Factors include the density and rheology of both the cement and the wellbore fluid as well as hole size and hole angle including vertical, deviated and horizontal well orientations. The goal is to secure a seal and leave the top of cement in the location required to address the reason for the plug in the first place. Creating an artificial bottom may be required to effectively spot the plug.

Plug Setting Aids
The CST™ cement support tool, tubing release tool (TRT), bottomhole kickoff assembly (BHKA) disconnect tool, and bottomhole kickoff assembly (BHKA) tool system were designed to aid in setting balanced and competent cement plugs during remedial and primary cementing operations.

Plug Cementing

Filter By  
Количество записей на странице Show     results per page
  TitleНазвание  DateДата
Summary Summary WellLock Resin System
WellLock resin system can function as a gas-impermeable secondary barrier to the primary cement sheath. It is also ideal for squeeze applications and microannuli repairs or for permanent plug and abandonment. It can be solid laden or used as a pure clean fluid.
Summary Summary PlugCem™ Cement
With Tuned Cementing Solutions™ cementing systems, Halliburton has created a set of innovative fit-for-purpose solutions with the flexibility required to allow each system to be tuned specifically for a given set of wellbore conditions.
Summary Summary PlugSeal™ Cement
With Tuned Cementing Solutions™ cementing systems, Halliburton has created a set of innovative fit-for-purpose solutions with the flexibility required to allow each system to be tuned specifically for a given set of wellbore conditions.
Summary Summary Plug Cementing
It is essential to these operations that a competent cement plug is placed the first time.
Summary Summary Plug Setting Aids
The CST™ cement support tool, tubing release tool (TRT), bottomhole kickoff assembly (BHKA) disconnect tool, and bottomhole kickoff assembly (BHKA) tool system were designed to aid in setting balanced and competent cement plugs during remedial and primary cementing operations.
Related Information

Related Information Дополнительная информация