Filtrate Control Agents

Halliburton produces polymer and non-polymer fluids that serve as filtration control additives to manage filtration rates and reduce filter cake permeability. These effective agents control the four basic mechanisms that affect filtration, including bridging, bonding, deflocculation, and viscosity.

For data sheets, products and related information please refer to the links at the right of this page.

Filtrate Control Agents

Filter By  
Количество записей на странице Show     results per page
  TitleНазвание  DateДата
Summary Summary DURATONE® E - Product Data Sheet
DURATONE® E organophilic lignite is used to help control filtration rates in ester and olefin based drilling muds. DURATONE E is stable at high temperatures and it can be used to control filtration rates in deep, hot wells. It can also be used to improve emulsification of water in oil-based muds and to promote fluid stability. DURATONE E meets environmental requirements for Norway.
Summary Summary DEXTRID® LTE™ Filtration Control Additive - Product Data Sheet
DEXTRID® LTE™, modified potato starch helps provide filtration control with minimum viscosity buildup in water-based drilling fluids.
Summary Summary DEXTRID® E™ Filtration Control Additive - Product Data Sheet
DEXTRID® E™ modified starch helps provides filtration control with minimum viscosity buildup in water-based drilling fluids. Through its coating mechanism, DEXTRID E filtration control additive helps to reduce dispersion of clay particles and stabilize reactive formations.
Summary Summary BARANEX® Filtration Control Additive - Product Data Sheet
BARANEX® filtration control agent is sulphonated lignite for use in water-based drilling fluid systems.
Summary Summary ADAPTA® L Filtration Control Additive - Product Data Sheet
ADAPTA® L (formerly BDF™-929) filtration control agent provides a rapid reduction in the HTHP filtrate of invert emulsion drilling fluids. This product has been designed to function similarly to other copolymer additives for moderate to standard operating temperatures. ADAPTA L is a liquid polymer suspension, which also may provide secondary viscosity to the fluid system.
Summary Summary BaraFLC® IE-513 Filtration Control Additive - Product Data Sheet
BaraFLC® IE-513 (formerly BDF™-513) filtration control additive is a cross-linked polymer that provides filtration control in non-aqueous systems. It also provides secondary viscosity and is suitable for use in fluids designed for deepwater application. BaraFLC IE-513 filtration control additive is best suited for low solvency base oils. BaraFLC IE-513 filtration control additive is recommended as the primary filtration control agent for our organophilic clay free fluids.
Summary Summary ADAPTA® Filtration Control Additive - Product Data Sheet
ADAPTA® filtration control additive is a cross-linked polymer that can provide filtration control in all non-aqueous systems up to about 425°F (218°C). It can also provide secondary viscosity and is suitable for use in fluids designed for deepwater applications. ADAPTA filtration control additive is the primary filtration control agent for organophilic clay-free invert emulsion fluids.
Summary Summary ADAPTA® 450 - Product Data Sheet
ADAPTA® 450 filtration control agent is a cross-linked polymer that can provide filtration control in oil and synthetic based fluid systems at temperatures up to 450°F (232°C).
Summary Summary CARBONOX® Filtration Control Additive - Product Data Sheet
CARBONOX®, powdered leonardite, can be used to aid in filtration control and control viscosity and gel strengths of water-based drilling fluids. CARBONOX can also be used to emulsify oil into water-based fluids.
Summary Summary BARABLOK™ 400™ Filtration Control Additive - Product Data Sheet
BARABLOK™ 400™ powdered hydrocarbon resin (asphaltite) is a natural bitumen with a high softening point that permits the product to extrude into formation fractures and bedding planes, and bond the matrix to prevent sloughing.
Summary Summary BaraFLC® W-690 Filtration Control Additive - Product Data Sheet
BaraFLC® W-690 (formerly BDF™-690) high temperature filtration control additive is a special starch derivative, intended for reducing high-pressure/high-temperature (HPHT) filtrate loss for water-based fluids. It is non-ionic in nature and suitable for fluids containing salts or ion sensitive additives.
Summary Summary BARABLOK™ Filtration Control Additive - Product Data Sheet
BARABLOK™ powdered hydrocarbon resin (asphaltite) is a natural bitumen with a high softening point that permits the product to extrude into formation fractures and bedding planes, and bond the matrix to prevent sloughing. BARABLOK contains no chemical treatment and can be used in water-based or oil-based drilling fluids. BARABLOK can be used with temperatures up to 350°F (177°C).
Summary Summary BaraFLC® W-403 Filtration Control Additive - Product Data Sheet
BaraFLC® W-403 (formerly BDF™-403) filtration control additive is a modified and bacterially stabilized tapioca starch that provides viscosity buildup in water-based drilling fluids
Summary Summary BaraFLC® W-490 Shale Stabilizer/Filtration Control Additive - Product Data Sheet
BaraFLC® W-490 (formerly BDF™-490) shale stabilizer / filtration control additive is a sulfonated asphalt, partially soluble in water and oil, and can be used in water and oil-based fluids where it functions as a shale stabilizer, cuttings dispersion inhibitor and contributes to high temperature fluid loss control. It is stable to many normal drilling fluid contaminants, operates at a broad pH range and is suitable for use up to 340°F (170°C). BaraFLC W-490 shale stabilizer / filtration control additive helps to form a thin yet tough wall cake and the small particles can effectively plug micro-fractures.
Summary Summary BaraFLC®-903 Filtration Control Additive - Product Data Sheet
BaraFLC®-903 (formerly BDF™-903) filtration control additive is sulfonated asphalt and used primarily in both water-based fluids and standard invert emulsion fluids. BaraFLC-903 filtration control additive helps to form a thin and tough filter cake where the small hydrophobic particles can effectively bridge micro-fractures.
Summary Summary DEXTRID® Filtration Control Additive - Product Data Sheet
DEXTRID® modified and bacterially stabilized potato starch helps provide filtration control with minimum viscosity buildup in water-based drilling fluids.
Summary Summary DURATONE® HT - Product Data Sheet
DURATONE® HT organophilic leonardite is used to help control filtration rates in oil-based drilling muds.
Summary Summary FILTER-CHEK™ Filtration Control Additive - Product Data Sheet
FILTER-CHEK™ modified starch can be used to ensure filtration control in water-based fluids with minimum viscosity buildup.
Summary Summary DEXTRID® LT™ Filtration Control Additive - Product Data Sheet
DEXTRID® LT™ modified potato starch helps provide filtration control with minimum viscosity buildup in water-based drilling fluids.
Summary Summary FACTANT™ - Product Data Sheet
FACTANT highly concentrated tall oil derivative provides both HTHP filtration control and stable emulsification. The product may be utilized in all nonaqueous base fluids and is effective at lower concentrations than traditional additives.
Summary Summary IMPERMEX® Filtration Control Additive - Product Data Sheet
IMPERMEX pregelatinized cornstarch provides filtration control in water-based drilling fluids. IMPERMEX agent is stable in saline drilling fluids that contain small amounts of divalent ions.
Summary Summary N-DRIL™ HT PLUS™ Filtration Control Additive - Product Data Sheet
N-DRIL™ HT PLUS™ filtration control additive is a cross-linked starch product intended for reducing HTHP filtrate loss for water based fluids, particularly in reservoir sections. N-DRIL HT PLUS filtration control additive is suitable for use in all water-based fluids including drilling, completion, and work-over fluids. It has minimal damage characteristics and is readily removed with acid or N-FLOW™ delayed acid generators. When used with oxygen scavengers or within formate brines, N-DRIL HT PLUS filtration control additive is effective up to 300°F (149°C).
Summary Summary PAC-L™ Filtration Control Additive - Product Data Sheet
PAC-L™ polyanionic cellulose provides filtration control in most water-based drilling fluids.
Summary Summary PAC-R™ Filtration Control Additive - Product Data Sheet
PAC-R™ a high molecular weight polyanionic cellulose provides filtration control and supplementary viscosity in most water-based drilling fluids.
Summary Summary POLYAC PLUS™ Filtration Control Additive - Product Data Sheet
POLYAC PLUS™ modified acrylic polymer is used in water-based drilling fluids as a filtration control agent.
Summary Summary PAC-RE™ Filtration Control Additive - Product Data Sheet
PAC-RE™ provides filtration control and supplementary viscosity in most water-based drilling fluids.
Summary Summary BDF™-610 Filtration Control Additive Enables Operator to Improve Well Performance
Enable operator to decrease HPHT fluid losses and HSE risks, while improving wellbore stability and overall well performance
Summary Summary BaraGel™ W-602 Cross-Linked Gel System Delivers Deepwater
After pumping an 8-bbl pill, losses stopped completely, saving operator over $400,000
Summary Summary Dynamic pad mud solution provides wellbore stability and reduces costs
Well-planned pad mud operation helps maintain wellbore stability in deviated top hole riser less drilling, saving costs and eliminating casing string from well design
Related Information

Related Information Дополнительная информация