Emulsifiers

Halliburton provides emulsifiers that effectively promote stability by reducing the interfacial tension between water and oil. Emulsion fluids are offered in two varieties: either oil-in-water, categorized as direct or water-based; or water-in-oil, known as invert emulsion.

For data sheets, products and related information please refer to the links at the right of this page.

Emulsifiers

Filter By  
Количество записей на странице Show     results per page
  TitleНазвание  DateДата
Summary Summary EZ MUL® NS - Product Data Sheet
EZ MUL® NS polyaminated fatty acid can be used to emulsify water into oil in non-aqueous phase (NAP) drilling fluids. It is used to help improve a drilling fluid's oil-wetting characteristics and is designed for use in NAP fluids that contain high levels of divalent salts (i.e. CaCl2) in the fluid's water phase.
Summary Summary FORTI-MUL® - Product Data Sheet- Product Data Sheet
FORTI-MUL® emulsifier is the primary emulsifier and oil-wetting agent for application in BaraXcel™ 1 drilling fluid system. When FORTI-MUL emulsifier is used with RHEMOD™ L viscosifier and ADAPTA® L filtrate reducer, it aids in producing a stable invert emulsion system with low filtration rates.
Summary Summary BROMI-MUL™ - Product Data Sheet
BROMI-MUL™ nonionic surfactant emulsifier is especially designed to emulsify high density brines such as sodium chloride, sodium bromide, calcium chloride, calcium bromide, and zinc bromide into diesel, crude or mineral oils.
Summary Summary EZ-CORE™ Emulsifier - Product Data Sheet
EZ-CORE™ refined tall oil fatty acid can be used as a passive emulsifier in all-oil coring and drilling systems.
Summary Summary EZ MUL® - Product Data Sheet
EZ MUL®, polyaminated fatty acid, can be used to emulsify water into oil in diesel oil-based drilling fluids. It is used to improve a drilling fluid's oil-wetting characteristics and is designed for use in oil-based fluids that contain high levels of divalent salts (i.e. CaCl2, MgCl2) in the fluid's water phase.
Summary Summary EZ MUL® NT - Product Data Sheet
EZ MUL® NT, polyaminated fatty acid, can be used to emulsify water into oil in oil-based drilling fluids. It is used to improve a drilling fluid's oil-wetting characteristics and is designed for use in oil-based fluids that contain high levels of divalent salts (i.e. CaCl², MgCl²) in the fluid's water phase. EZ MUL NT is the primary emulsifier in the INVERMUL® RF systems.
Summary Summary FACTANT™ - Product Data Sheet
FACTANT highly concentrated tall oil derivative provides both HTHP filtration control and stable emulsification. The product may be utilized in all nonaqueous base fluids and is effective at lower concentrations than traditional additives.
Summary Summary INVERMUL® NT - Product Data Sheet
INVERMUL NT blend of oxidized tall oil and polyaminated fatty acid is the basic ingredient of Baroid's water-in-oil emulsion drilling fluids.
Summary Summary LE SUPERMUL™ - Product Data Sheet
LE SUPERMUL polyaminated fatty acid, can be used to emulsify water into PETROFREE LE drilling fluids.
Summary Summary PERFORMUL™ Emulsifier - Product Data Sheet
PERFORMUL™ emulsifier is a primary emulsifier for ENVIROMUL™ and INNOVERT® oil- based drilling fluid systems. PERFORMUL emulsifier is preferred for use in the Norwegian sector because it is a yellow-rated emulsifier. However, PERFORMUL emulsifier can be used worldwide in a number of different fluids.
Summary Summary Emulsifiers
An emulsifier reduces the interfacial tension between two liquids (water and oil) to achieve stability. Emulsion fluids are either oil-in-water (direct or water-based) or water-in-oil (invert emulsion).
Related Information

Related Information Дополнительная информация