Tool Models

Whether your challenge exists in a deeply buried high temperature reservoir or a long horizontal wellbore, Halliburton has a solution for you. Come experience our innovative technologies by visiting our booth. You'll get to see them up close and personal and learn from our experts how they can help solve your most complex challenges.
	LockJar® E-Line Jar Halliburton's LockJar® E-Line Jar provides a simple way to help avoid time-consuming and expensive stuck strings and fishing jobs in wireline logging operations. Available in 3.5-in. and 2.75-in. OD, the LockJar hydraulic jar can be activated multiple times in multiple intervals to free a stuck tool string and preserve a logging run without costly delays.
	Presidium™ EC2 Casing Packer The Presidium™ EC2 packer is an electronically-triggered, hydrostatically-set packer designed for casing-to-casing applications. The Presidium EC2 packer can be used as a standalone packer, or coupled with an ES II™ stage cementer for multiple stage cementing operations. Presidium EC2 packers are set inside casing strings to provide a high-pressure casing-to-casing seal to protect against annular gas migration. It is also designed to support the hydrostatic weight of annular well fluids above the Presidium EC2 Packer in wells with weak formation zones.
	TDReam™ In a traditional reaming-while-drilling BHA the reamer is placed above the RSS and LWD tools, creating a long rathole and requiring an extra trip to enlarge the hole to TD. Challenged to design a tool to increase efficiency, Halliburton has responded with a solution that has the added benefits of optimized steerability and fluid flow, and reduced tool length based on the proven reliability of the NBR® reamer technology. Run in conjunction with a traditional reamer, TDReam™ is Halliburton's newest downhole innovation designed to significantly reduce rathole length and reach TD in one run.
	Real Time Density and Viscosity (RTDV) Measurement Unit Halliburton Baroid's Real Time Density and Viscosity (RTDV) is a fully automated unit that measures the density and six speed rheology of drilling fluids. As measurements are made by the automated sensor, the data is recorded and archived via Halliburton's Insite® data acquisition software, where it can then be displayed in real time. The RTDV measurement unit is a key factor in optimized drilling performance by providing repeated, consecutive, and consistent tests on drilling fluid. By utilizing this unit, operators now have the ability to quickly recognize changes in drilling fluid, analyze data trends, and act upon these changes immediately.
	SmartWell® Electro-Hydraulic Disconnect Tool Intelligent completions and electric submersible pumps (ESPs) are becoming more common in the industry as these technologies allow for improved recoveries especially in multi-zone wells, where the production can be controlled and optimized without downhole intervention. However, challenges exist where an ESP needs to be removed for routine maintenance or the lower intelligent completion needs to be deployed on drill pipe due to torque or drag limitations in long horizontal sections. Halliburton has developed the SmartWell® Electro-Hydraulic Disconnect tools for use in these applications. These tools result in significant time and cost savings by allowing the upper portion of the completion to be removed without disturbing the lower intelligent completion section.
	VersaFlex® Expandable Liner Hanger (ELH) System The VersaFlex ELH system has set the mark in terms of reliability with a 98% operating efficiency compared to 80% typically experienced with conventional liner hangers and achieves near perfect liner-top sealing capabilities. The VersaFlex system integrates the hanger, packer, and tieback receptacle into a single unit. As a result, we have simplified installation and reduced the number of trips in the hole. It is also a good fit for difficult hole sections with its ability for high-torque rotation including washing, reaming, and drilling applications.